The HP 2530 Switches Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0.

The HP 2530 Switch Series is easy to use and deploy, and can be manages with the HP Intelligent Management Center (IMC) for a single view of your entire network.

What's New

  • Cost-effective, reliable and secure fully managed Layer 2 switches
  • 10Gigabit uplinks, ACLs, EEE, traffic prioritization
  • 8-, 24-, and 48-port Gigabit or Fast Ethernet models
  • PoE+ models for voice, video and wireless
  • Lifetime Warranty 2.0 with 3 years 24x7 phone support

Features

Cost-Effective, Reliable and Secure Access Layer Switches

  • The HP 2530 Switch Series provides secure, reliable and ease of use for enterprise edge, branch office, and SMB deployments.
  • Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0.
  • Right size deployment with choice of 8, 24, and 48 port models available with Gigabit or Fast Ethernet ports, optional PoE+ and optional 10GbE uplinks.
  • Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode.
  • Lifetime Warranty 2.0 with 3 years 24x7 phone support and no software licensing required.

Security and Quality of Service

  • The HP 2530 Switch Series supports flexible authentication methods including 802.1X, MAC, and Web Authentication for greater security and policy-driven application authentication.
  • Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, and flexible traffic controls include ACLs and QoS.
  • Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP).

Simple Deployment and Management

  • The HP 2530 Switch Series supports choice of management interface with Web GUI, command-line interface (CLI) and Simple Network Management Protocol (SNMP), using console or micro USB ports.
  • Quiet operation with fanless and variable speed fan models.
  • Flexible deployment with wall, table, and rack mounting options.

Single View of the Network

  • The HP 2530 Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
  • RMON, and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Quality of Service (QoS)

  • Traffic prioritization (IEEE 802.1p) — Allows real-time traffic classification with support for eight priority levels mapped to either two or four queues, and uses weighted deficit round robin (WDRR) or strict priority
  • Simplified QoS configuration
    • Port-based — Prioritizes traffic by specifying a port and priority level
    • VLAN-based — Prioritizes traffic by specifying a VLAN and priority level
  • Class of Service (CoS) — sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
  • Rate limiting — Establishes per-port ingress-enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
  • Layer 4 prioritization — enables prioritization based on TCP/UDP port numbers
  • Flow control — Helps deliver reliable communication during full-duplex operation

Management

  • Choice of management interfaces
    • HTML-based easy-to-use Web GUI — Allows configuration of the switch from any Web browser
    • Robust CLI — Provides advanced configuration and diagnostics
    • Simple network management protocol (SNMPv1/v2c/v3) — Allows the switch to be managed with a variety of third-party network management applications
  • Virtual stacking — Provides single IP address management for up to 16 switches
  • sFlow (RFC 3176) — Delivers wire-speed traffic accounting and monitoring, configured by SNMP and CLI with three terminal encrypted receivers
  • IEEE 802.1AB Link-Layer Discovery Protocol (LLDP) — Automates device discovery protocol for easy mapping by network management applications
  • Logging — provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
  • Port mirroring — Allows traffic to be mirrored on any port or a network analyzer to assist with diagnostics or detecting network attacks
  • Remote monitoring (RMON) — Provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
  • Find, fix, and inform — Finds and fixes common network problems automatically, and then informs the administrator
  • Friendly port names — allows assignment of descriptive names to ports
  • Dual flash images — provides independent primary and secondary operating system files for backup while upgrading
  • Multiple configuration files — Are easily stored with a flash image
  • Front-panel LEDs
    • Locator LEDs — Allows users to set the locator LED on a specific switch to turn on, blink, or turn off; and simplifies troubleshooting by making it easy to locate a particular switch within a rack of similar switches
    • Per-port LEDs — Provides an at-a-glance view of the status, activity, speed, and full-duplex operation
    • Power and fault LEDs — Display issues, if any
  • Comware CLI
    • Comware-compatible CLI — bridges the experience of HP Comware CLI users who are using the HP ProVision software CLI
    • Display and fundamental Comware CLI commands — are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and fundamental commands provide a Comware-familiar initial switch setup
    • Configuration Comware CLI commands — when Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI command
  • NEW Download Software via DHCP — Adds the option to specify the location of switch software via DHCP

Connectivity

  • IPv6
    • IPv6 host — Allows the switch to be deployed and managed at the edge of an IPv6 network
    • Dual stack (IPv4/IPv6) — Supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6
    • MLD snooping — Forwards IPv6 multicast traffic to appropriate interface; prevents IPv6 multicast traffic from flooding the network
    • IPv6 ACL/QoS — Supports ACL & QoS for IPv6 network traffic on Gigabit & 48 port 10/100 models
    • IPv6 RA Guard — restricts ports that can accept Router Advertisements
  • IEEE 802.3af Power over Ethernet (PoE) — provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
  • IEEE 802.3at PoE+ — Provides up to 30 W per port to IEEE 802.3 for PoE/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras (refer to the product specifications for the total PoE power availability)
  • Auto-MDIX — Adjusts automatically for straight-through or crossover cables on all ports
  • Pre-standard PoE support — Detects and provides power to pre-standard PoE devices (refer to the list of supported devices in the product FAQs, which can be accessed at hp.com/networking/support)
  • SFP slots — Provides fiber connectivity such as Gigabit-SX, -LX, -LH, and -BX with four SFP slots on all 24- and 48-port Gigabit Ethernet models. Fast Ethernet 24- and 48-port models have two SFP slots and two RJ-45 Gigabit uplinks; 8-port models have two dual-personality ports supporting either SFP or RJ-45 Gigabit uplinks
  • Dual-personality (RJ-45 or USB micro-B) serial console port — Gives easy access to switch CLI with front-of-switch location and the flexibility of using either an RJ-45 or USB micro-B serial console port

Layer 2 switching

  • VLANs — Provides support for 512 VLANs and 4,094 VLAN IDs
  • Jumbo packet support — Supports up to 9,220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models automatically support up to 2,000-byte frames with no configuration needed
  • 16K MAC address table — provides access to many Layer 2 devices
  • GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
  • NEW Rapid Per-VLAN Spanning Tree (RPVST+) — allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+

Security

  • ACLs — Accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models.)
  • Source-port filtering — allows only specified ports to communicate with each other
  • RADIUS/TACACS+ — eases switch management security administration by using a password authentication server
  • Secure Sockets Layer (SSL) — encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
  • Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
  • MAC address lockout — prevents particular configured MAC addresses from connecting to the network
  • Multiple user authentication methods
    • IEEE 802.1X — uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry standards
    • Web-based authentication — provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients that do not support the IEEE 802.1X supplicant
    • MAC-based authentication — authenticates the client with the RADIUS server based on the client's MAC address
  • Secure shell (SSH) v2 — Encrypts all transmitted data for secure remote CLI access over IP networks
  • Secure shell — encrypts all transmitted data for secure remote CLI access over IP networks
  • STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
  • STP root guard — protects the root bridge from malicious attacks or configuration mistakes
  • Secure management access — delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2 and SNMPv3
  • Custom banner — displays security policy when users log in to the switch
  • Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
  • Protected ports CLI — Offers intuitive CLI to configure the source-port filter feature, by allowing specified ports to be isolated from all other ports on the switch; the protected port or ports can communicate only with the uplink or shared resources
  • Authentication flexibility
    • Multiple IEEE 802.1X users per port — provides authentication for up to eight IEEE 802.1X users per port; prevents a user from "piggybacking" on another user's IEEE 802.1X authentication
    • Concurrent IEEE 802.1X and Web or MAC authentication schemes per port — allows a switch port to accept any IEEE 802.1X and either Web or MAC authentications
  • Switch management logon security — helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
  • NEW DHCP protection — blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
  • NEW Dynamic ARP protection — blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
  • NEW Dynamic IP lockdown — works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing

Convergence

  • LLDP-MED (Media Endpoint Discovery) — defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
  • IP multicast (data-driven IGMP) — prevents flooding of IP multicast traffic
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — facilitates easy mapping using network management applications with LLDP automated device discovery protocol
  • PoE and PoE+ allocations — Support multiple methods—automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user specified—to allocate and manage PoE/PoE+ power for more efficient energy use
  • Voice VLAN — Uses LLDP-MED to automatically configure a VLAN for IP phones
  • IP multicast (data-driven IGMPv3) — prevents flooding of IP multicast traffic
  • LLDP-CDP compatibility — receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation

Resiliency and high availability

  • Port trunking and link aggregation
    • Trunking — Supports up to eight links per trunk to increase bandwidth and create redundant connections; and supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models.)
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP) — Eases configuration of trunks through automatic configuration
  • IEEE 802.1s Multiple Spanning Tree — provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
  • NEW SmartLink — provides easy-to-configure link redundancy of active and standby links

Product architecture

  • Energy-efficient design
    • IEEE 802.3az — Reduces power consumption during periods of low data activity on Gigabit Ethernet switches
    • Port low power mode — Enables the port to automatically go into low-power mode to conserve energy when no link is detected
    • Fanless and variable-speed fans — Decreases power consumption in fanless (all 8-port, 2530-24, and 2530-48 PoE+ switches) as well as variable-speed fan switches
    • Port LEDs — Conserves energy by optionally turning off port link and activity LEDs
  • Switch on a chip — Provides a highly integrated, high-performance switch design with a non-blocking architecture

Flexibility

  • Flexible mounting
    • Rack mountable — Allows the switch to be mounted on a standard 19-inch rack, with the hardware included
    • Wall mountable — Allows the switch to be mounted on a wall, using the hardware included
    • Surface mountable — Allows the switch to be mounted above or below a surface (such as a desk or table), using the hardware included
  • Quiet operation — Lowers noise, making it suitable for deployments in acoustically sensitive environments such as conference rooms and office spaces
  • Compact size — Reduces space requirements (refer to the product specifications for the exact dimensions)

Warranty and support

  • Lifetime Warranty 2.0 — advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†
  • Electronic and telephone support (for Lifetime Warranty 2.0) — limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone support is available from HP for the entire warranty period; to reach our support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary
  • Software releases — to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary
HP 2530-48G-PoE+ Switch (J9772A) HP 2530-24G-PoE+ Switch (J9773A) HP 2530-8G-PoE+ Switch (J9774A)
I/O ports and slots
48 RJ-45 autosensing 10/100/1000 PoE+ ports

4 fixed Gigabit Ethernet SFP ports

24 RJ-45 autosensing 10/100/1000 PoE+ ports

4 fixed Gigabit Ethernet SFP ports

8 RJ-45 autosensing 10/100/1000 PoE+ ports

2 dual-personality ports

Physical characteristics
Dimensions 17.44(w) x 13.00(d) x 1.75(h) in (44.3 x 32.26 x 4.45 cm) 17.44(w) x 13.00(d) x 1.75(h) in (44.3 x 33.02 x 4.45 cm) 10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm)
Weight 10.4 lb (4.72 kg) 8.7 lb (3.95 kg) 2.2 lb (1 kg)
Memory and processor
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated
Performance
Stacking capability Virtual; 16 switches Virtual; 16 switches Virtual; 16 switches
100 Mb Latency < 7.4 µs (LIFO 64-byte packets) < 7.4 µs (LIFO 64-byte packets) < 7.4 µs (LIFO 64-byte packets)
1000 Mb Latency < 2.3 µs (LIFO 64-byte packets) < 2.3 µs (LIFO 64-byte packets) < 2.6 µs (LIFO 64-byte packets)
Throughput 77.3 Mpps (64-byte packets) 41.6 Mpps (64-byte packets) 14.8 Mpps (64-byte packets)
Switching capacity 104 Gbps 56 Gbps 20 Gbps
Environment
Operating temperature 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C)
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Electrical characteristics
Maximum heat dissipation 236 BTU/hr (248.98 kJ/hr) 135 BTU/hr (142.42 kJ/hr) 65 BTU/hr (68.58 kJ/hr)
AC voltage 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC
Maximum power rating 476 W 247 W 86 W
PoE power 382 W 195 W 67 W
What's included
What's in the box (1) HP 2530-48G-PoE+ Switch (1) HP 2530-24G-PoE+ Switch (1) HP 2530-8G-PoE+ Switch
Warranty Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s)
HP 2530-48-PoE+ Switch (J9778A) HP 2530-24-PoE+ Switch (J9779A) HP 2530-8-PoE+ Switch (J9780A)
I/O ports and slots
48 RJ-45 autosensing 10/100 PoE+ ports

2 autosensing 10/100/1000 ports

2 fixed Gigabit Ethernet SFP ports

24 RJ-45 autosensing 10/100 PoE+ ports

2 autosensing 10/100/1000 ports

2 fixed Gigabit Ethernet SFP ports

8 RJ-45 autosensing 10/100 PoE+ ports

2 dual-personality ports

Physical characteristics
Dimensions 17.4(w) x 12.7(d) x 1.75(h) in (44.2 x 32.26 x 4.45 cm) 17.4(w) x 12.7(d) x 1.75(h) in (44.2 x 32.26 x 4.45 cm) 10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm)
Weight 10.1 lb (4.58 kg) 8.4 lb (3.81 kg) 2.0 lb (0.91 kg)
Memory and processor
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated
Performance
Stacking capability Virtual; 16 switches Virtual; 16 switches Virtual; 16 switches
100 Mb Latency < 6.6 µs (LIFO 64-byte packets) < 1.7 µs (LIFO 64-byte packets) < 1.3 µs (LIFO 64-byte packets)
1000 Mb Latency < 2.2 µs (LIFO 64-byte packets) < 1.1 µs (LIFO 64-byte packets) < 2.3 µs (LIFO 64-byte packets)
Throughput 13 Mpps (64-byte packets) 9.5 Mpps (64-byte packets) 4.1 Mpps (64-byte packets)
Switching capacity 17.6 Gbps 12.8 Gbps 5.6 Gbps
Environment
Operating temperature 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C)
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Electrical characteristics
Maximum heat dissipation 170 BTU/hr (179.35 kJ/hr) 99 BTU/hr (104.45 kJ/hr) 29 BTU/hr (30.6 kJ/hr)
AC voltage 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC
Maximum power rating 441 W 237 W 76.7 W
PoE power 382 W 195 W 67 W
What's included
What's in the box (1) HP 2530-48-PoE+ Switch (1) HP 2530-24-PoE+ Switch (1) HP 2530-8-PoE+ Switch
Warranty Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s)
HP 2530-48G Switch (J9775A) HP 2530-24G Switch (J9776A) HP 2530-8G Switch (J9777A)
I/O ports and slots
48 RJ-45 autosensing 10/100/1000 ports

4 fixed Gigabit Ethernet SFP ports

24 RJ-45 autosensing 10/100/1000 ports

4 fixed Gigabit Ethernet SFP ports

8 RJ-45 autosensing 10/100/1000 ports

2 dual-personality ports

Physical characteristics
Dimensions 17.44(w) x 10.00(d) x 1.75(h) in (44.3 x 25.4 x 4.45 cm) 17.44(w) x 10.00(d) x 1.75(h) in (44.3 x 25.4 x 4.45 cm) 10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm)
Weight 6.8 lb (3.08 kg) 6.1 lb (2.77 kg) 2.0 lb (0.91 kg)
Memory and processor
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated
Performance
Stacking capability Virtual; 16 switches Virtual; 16 switches Virtual; 16 switches
100 Mb Latency < 7.4 µs (LIFO 64-byte packets) < 7.4 µs (LIFO 64-byte packets) < 7.4 µs (LIFO 64-byte packets)
1000 Mb Latency < 2.3 µs (LIFO 64-byte packets) < 2.3 µs (LIFO 64-byte packets) < 2.6 µs (LIFO 64-byte packets)
Throughput 77.3 Mpps (64-byte packets) 41.6 Mpps (64-byte packets) 14.8 Mpps (64-byte packets)
Switching capacity 104 Gbps 56 Gbps 20 Gbps
Environment
Operating temperature 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C)
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Electrical characteristics
Maximum heat dissipation 203 BTU/hr (214.17 kJ/hr) 164 BTU/hr (173.02 kJ/hr) 63 BTU/hr (66.46 kJ/hr)
AC voltage 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC
Maximum power rating 59.5 W 48.0 W 18.6 W
What's included
What's in the box (1) HP 2530-48G Switch (1) HP 2530-24G Switch (1) HP 2530-8G Switch
Warranty Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s)
HP 2530-48 Switch (J9781A) HP 2530-24 Switch (J9782A) HP 2530-8 Switch (J9783A)
I/O ports and slots
48 RJ-45 autosensing 10/100 ports

2 autosensing 10/100/1000 ports

2 fixed Gigabit Ethernet SFP ports

24 RJ-45 autosensing 10/100 ports

2 autosensing 10/100/1000 ports

2 fixed Gigabit Ethernet SFP ports

8 RJ-45 autosensing 10/100 ports

2 dual-personality ports

Physical characteristics
Dimensions 17.4(w) x 9.7(d) x 1.75(h) in (44.2 x 24.64 x 4.45 cm) 17.4(w) x 9.7(d) x 1.75(h) in (44.2 x 24.64 x 4.45 cm) 10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm)
Weight 6.3 lb (2.86 kg) 5.7 lb (2.59 kg) 1.8 lb (0.82 kg)
Memory and processor
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated
Performance
Stacking capability Virtual; 16 switches Virtual; 16 switches Virtual; 16 switches
100 Mb Latency < 6.6 µs (LIFO 64-byte packets) < 1.7 µs (LIFO 64-byte packets) < 1.3 µs (LIFO 64-byte packets)
1000 Mb Latency < 2.2 µs (LIFO 64-byte packets) < 1.1 µs (LIFO 64-byte packets) < 1.3 µs (LIFO 64-byte packets)
Throughput 13 Mpps (64-byte packets) 9.5 Mpps (64-byte packets) 4.1 Mpps (64-byte packets)
Switching capacity 17.6 Gbps 12.8 Gbps 5.6 Gbps
Environment
Operating temperature 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C)
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Electrical characteristics
Maximum heat dissipation 102 BTU/hr (107.61 kJ/hr) 50 BTU/hr (52.75 kJ/hr) 25 BTU/hr (26.38 kJ/hr)
AC voltage 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC
Maximum power rating 29.9 W 14.7 W 7.2 W
What's included
What's in the box (1) HP 2530-48 Switch (1) HP 2530-24 Switch (1) HP 2530-8 Switch
Warranty Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s)
HP 2530-48G-PoE+-2SFP+ Switch (J9853A) HP 2530-24G-PoE+-2SFP+ Switch (J9854A) HP 2530-48G-2SFP+ Switch (J9855A)
I/O ports and slots
48 RJ-45 autosensing 10/100/1000 PoE+ ports

2 SFP+ fixed 1000/10000 SFP+ ports

24 RJ-45 autosensing 10/100/1000 PoE+ ports

2 SFP+ fixed 1000/10000 SFP+ ports

48 RJ-45 autosensing 10/100/1000 ports

2 SFP+ fixed 1000/10000 SFP+ ports

Physical characteristics
Dimensions 17.44(w) x 13.00(d) x 1.75(h) in (44.3 x 32.26 x 4.45 cm) 17.44(w) x 13.00(d) x 1.75(h) in (44.3 x 33.02 x 4.45 cm) 17.44(w) x 10.00(d) x 1.75(h) in (44.3 x 25.4 x 4.45 cm)
Weight 10.4 lb (4.72 kg) 8.6 lb (3.9 kg) 7.1 lb (3.08 kg)
Memory and processor
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated
Performance
Stacking capability Virtual; 16 switches Virtual; 16 switches Virtual; 16 switches
100 Mb Latency < 7.3 µs (LIFO 64-byte packets) < 7.3 µs (LIFO 64-byte packets) < 7.3 µs (LIFO 64-byte packets)
1000 Mb Latency < 2.7 µs (LIFO 64-byte packets) < 2.7 µs (LIFO 64-byte packets) < 2.7 µs (LIFO 64-byte packets)
10 Gbps Latency < 4.0 µs (LIFO 64-byte packets) < 2.2 µs (LIFO 64-byte packets) < 4.0 µs (LIFO 64-byte packets)
Throughput 101 Mpps (64-byte packets) 65.4 Mpps (64-byte packets) 101 Mpps (64-byte packets)
Switching capacity 136 Gbps 88 Gbps 136 Gbps
Environment
Operating temperature 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C)
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Electrical characteristics
Maximum heat dissipation 215 BTU/hr (226.83 kJ/hr) 118 BTU/hr (124.49 kJ/hr) 189 BTU/hr (199.4 kJ/hr)
AC voltage 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC 100 - 127 / 200 - 240 VAC
Maximum power rating 439 W 222.2 W 55.1 W
PoE power 382 W 195 W
What's included
What's in the box (1) HP 2530-48G-PoE+-2SFP+ Switch (1) HP 2530-24G-PoE+-2SFP+ Switch (1) HP 2530-48G-2SFP+ Switch
Warranty Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s) Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s)
HP 2530-24G-2SFP+ Switch (J9856A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports

2 SFP+ fixed 1000/10000 SFP+ ports

Physical characteristics
Dimensions 17.44(w) x 10.00(d) x 1.75(h) in (44.3 x 25.4 x 4.45 cm)
Weight 6.2 lb (2.81 kg)
Memory and processor
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated
Performance
Stacking capability Virtual; 16 switches
100 Mb Latency < 7.3 µs (LIFO 64-byte packets)
1000 Mb Latency < 2.7 µs (LIFO 64-byte packets)
10 Gbps Latency < 2.2 µs (LIFO 64-byte packets)
Throughput 65.4 Mpps (64-byte packets)
Switching capacity 88 Gbps
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing
Electrical characteristics
Maximum heat dissipation 104 BTU/hr (109.72 kJ/hr)
AC voltage 100 - 127 / 200 - 240 VAC
Maximum power rating 31 W
What's included
What's in the box (1) HP 2530-24G-2SFP+ Switch
Warranty Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries);Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s)

Management

IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB

HP X111 100M SFP LC FX Transceiver (J9054C)

HP X111 100M SFP LC FX Transceiver (J9054C)

A small form-factor pluggable (SFP) 100Base-FX transceiver that provides 100 Mbps full-duplex connectivity up to 2 km on multimode fiber.

Ports

1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX)
Duplex: half or full

Physical characteristics

Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2 km (full duplex) or 412 m (half duplex)

Notes

Transmitter wavelength: 1310nm

Power consumption is 1.1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J9054B 100-FX SFP-LC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

Compatible products

HP X112 100M SFP LC BX-D Transceiver (J9099B)

HP X112 100M SFP LC BX-D Transceiver (J9099B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "downstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D)
Duplex: full only

Physical characteristics

Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)
Weight: 0.04 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.

Power consumption is 1.1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver can only connect to a 100-BX-U product. You cannot connect two 100-BX-D transceivers together.)

Compatible products

HP X112 100M SFP LC BX-U Transceiver (J9100B)

HP X112 100M SFP LC BX-U Transceiver (J9100B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "upstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U)
Duplex: full only

Physical characteristics

Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)
Weight: 0.07 lb. (.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U transceiver can only connect to a 100-BX-D product. You cannot connect two 100-BX-U transceivers together.)

Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.

Power consumption is 1.1 watts maximum.

Compatible products

HP X121 1G SFP LC SX Transceiver (J4858C)

HP X121 1G SFP LC SX Transceiver (J4858C)

A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.

Ports

1 LC 1000BASE-SX port
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2-220m with 62.5 µm core diameter, 160 MHz*km bandwidth
  • 2-275m with 62.5 µm core diameter, 200 MHz*km bandwidth
  • 2-500m with 50 µm core diameter, 400 MHz*km bandwidth
  • 2-550m with 50 µm core diameter, 500 MHz*km bandwidth

Cable length: 2-550m
Fiber type: Multi Mode

Compatible products

HP X121 1G SFP LC LX Transceiver (J4859C)

HP X121 1G SFP LC LX Transceiver (J4859C)

A small form-factor pluggable (SFP) Gigabit LX transceiver that provides a full-duplex Gigabit solution up to 10 km (single-mode) or 550 m (multimode).

Ports

1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:
  • Either single mode or multimode
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth)
  • 2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth)
  • 2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth)
  • 2-10,000 m (single-mode fiber)

Notes

A mode conditioning patch cord may be needed in some multimode fiber installations.

Wavelength: 1310nm

Power Consumption: < 500mW Typical

Compatible products

HP X121 1G SFP LC LH Transceiver (J4860C)

HP X121 1G SFP LC LH Transceiver (J4860C)

A small form-factor pluggable (SFP) Gigabit LH (ZX) transceiver that provides a full-duplex Gigabit solution up to 80 km on single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Duplex: full only

Physical characteristics

Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: -40°F to 185°F (-40°C to 85°C)
Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 10-80,000 m (single-mode fiber)

Fiber type: Single Mode

Notes

Power consumption is 0.8 watts typical with 1 watt maximum at 100% utilization.

For distances less than 20 km, a 10 dB attenuator must be used.

For distances between 20 km and 40 km, a 5 dB attenuator must be used.

Attenuators can be purchased from most cable vendors.

Compatible products

HP X122 1G SFP LC BX-D Transceiver (J9142B)

HP X122 1G SFP LC BX-D Transceiver (J9142B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "downstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D)
Duplex: full only

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.

Power consumption is 1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9142B connects to the J9143B "upstream" transceiver, or to any IEEE-standard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D transceiver can only connect to a 1000-BX-U product. You cannot connect two 1000-BX-D transceivers together.)

Compatible products

HP X122 1G SFP LC BX-U Transceiver (J9143B)

HP X122 1G SFP LC BX-U Transceiver (J9143B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "upstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U)
Duplex: full only

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U transceiver can only connect to a 1000-BX-D product. You cannot connect two 1000-BX-U transceivers together.)

Power consumption is 1 watt maximum.

Compatible products

HP X121 1G SFP RJ45 T Transceiver (J8177C)

HP X121 1G SFP RJ45 T Transceiver (J8177C)

A small form-factor pluggable (SFP) Gigabit copper transceiver that provides a full-duplex Gigabit solution up to 100 m on Category 5 or better cable.

Ports

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Duplex: full only

Physical characteristics

Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow over the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Altitude: up to 10,000 ft. (3000 km)

Cabling

Cable type:
  • 1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Maximum distance:

  • 100 m

Notes

Power consumption is nominally 1 watt.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J8177C 1000Base-T Mini-GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J8177C Gigabit copper mini-GBIC is not supported on dual-personality ports.

The J8177C is capable of 100 Mb operation. This is supported on only the HP ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software version K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb operation.

Important: The earlier J8177B does not support 100 Mb operation.

When used in the ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A), the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC port, but will block access to the other port.

Compatible products

HP X132 10G SFP+ LC SR Transceiver (J9150A)

HP X132 10G SFP+ LC SR Transceiver (J9150A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 m on multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-SR)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.6 W
Power consumption maximum: 0.8 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2-26m with 62.5 µm multimode cable @ 160 MHz*km
  • 2-33m with 62.5 µm multimode cable @ 200 MHz*km
  • 2-66m with 50 µm multimode cable @ 400 MHz*km
  • 2-82m with 50 µm multimode cable @ 500 MHz*km
  • 2-300m with 50 µm multimode cable @ 2000 MHz*km

Cable length: 2-300m
Fiber type: Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC LR Transceiver (J9151A)

HP X132 10G SFP+ LC LR Transceiver (J9151A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on single-mode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.9 W
Power consumption maximum: 1 W

Cabling

Cable type:
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 2m-10km with 9/125 µm single-mode cable

Cable length: 2m to 10km
Fiber type: Single Mode

Notes

Conditioning patch cord cables are not supported.

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC LRM Transceiver (J9152A)

HP X132 10G SFP+ LC LRM Transceiver (J9152A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LRM standard, for 10-Gigabit connectivity up to 220 m on legacy multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.7 W
Power consumption maximum: 1 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations)

Maximum distance:

  • 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
  • 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
  • 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
  • 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
  • 0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km

Cable length: 0.5m to 220m
Fiber type: Multi Mode

Notes

For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the maximum distances listed above.

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC ER Transceiver (J9153A)

HP X132 10G SFP+ LC ER Transceiver (J9153A)

HP X132 10G SFP+ LC ER Transceiver: The SFP+ ER transceiver transmits 10Gbps of data up to a 40km distance over single mode fiber cable.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-ER)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

0.55(w) x 2.22(d) x 0.47(h) in (1.39 x 5.65 x 1.19 cm)
Weight: 0.04 lb (0.02 kg), Fully loaded
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Power consumption typical: 1.3 W
Power consumption maximum: 1.5 W

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 40km

Fiber type: Single Mode

Notes

Check switch release notes for minimum version of software required to support this transceiver.

Some switches have limits as to how many of this particular transceiver can be installed. See the release notes of the switch software/firmware being used for more details.

This transceiver is supported in 2910al switches with software release W.15.07.0002 or later.

Compatible products

HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable (J9281B)

HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable (J9281B)

A low-price 10-Gigabit connectivity option consisting of a 1 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 3.28 ft. (1 m)

Physical characteristics

Weight: .24 lb. (0.11 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (J9283B)

HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (J9283B)

A low-price 10-Gigabit connectivity option consisting of a 3 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 10 ft. (3 m)

Physical characteristics

Weight: .49 lb. (0.22 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable (J9285B)

HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable (J9285B)

A low-price 10-Gigabit connectivity option consisting of a 7 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 22.97 ft. (7 m)

Physical characteristics

Weight: 1.02 lb., Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable (J9300A)

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable (J9300A)

A 1m direct attach copper cable with an XFP connector attached on one end and an SFP+ connector attached on the other end. This cable provides a low price connectivity option between switches/servers/storage to interconnect XFP and SFP+ form factors.

Connectivity

Length: 3.28 ft. (1 m)

Physical characteristics

Weight: .27 lb. (0.12 kg), Fully loaded cable with XFP transcevier on one end and SFP+ on the other end

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 32°F to 158°F (0°C to 70°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Notes

XFP end consumes 2 watts SFP+ end consumes 0.036 watts

Compatible products

HP X244 10G XFP to SFP+ 3m Direct Attach Copper Cable (J9301A)

HP X244 10G XFP to SFP+ 3m Direct Attach Copper Cable (J9301A)

A 3m direct attach copper cable with an XFP connector attached on one end and an SFP+ connector attached on the other end. This cable provides a low price connectivity option between switches/servers/storage to interconnect XFP and SFP+ form factors.

Connectivity

Length: 9.84 ft. (3 m)

Physical characteristics

Weight: .51 lb. (0.23 kg), Fully loaded cable with XFP transcevier on one end and SFP+ on the other end

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Cabling

Maximum distance:
  • 3m Direct Attach Cable

Notes

XFP end consumes 2 watts SFP+ end conumes 0.036 watts

Compatible products

HP X244 10G XFP to SFP+ 5m Direct Attach Copper Cable (J9302A)

HP X244 10G XFP to SFP+ 5m Direct Attach Copper Cable (J9302A)

A 5m direct attach copper cable with an XFP connector attached on one end and an SFP+ connector attached on the other end. This cable provides a low price connectivity option between switches/servers/storage to interconnect XFP and SFP+ form factors.

Connectivity

Length: 16.4 ft. (5 m)

Physical characteristics

Weight: .74 lb. (0.34 kg), Fully loaded cable with XFP transcevier on one end and SFP+ on the other end

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Notes

XFP end consumes 2 watts SFP+ end conumes 0.036 watts

Compatible products

HP X410 1U Universal 4-post Rack Mounting Kit (J9583A)

HP X410 1U Universal 4-post Rack Mounting Kit (J9583A)

This rack mounting kit can be used to install a variety of 1U switches into a variety of 4 post racks. It supports both side to side air flow as well as front to back air flow.

Notes

The rack mounting kit supports the 1U, full width switches in the following switch series and the power supply: V1810 Series, E2510 Series, E2520 Series, E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the E620 Power Supply

This universal rack mounting kit is design to fit the following racks: HP 10K 10642, HP 10K 10842, Panduit CN, Panduit CS, Wrightline Vantage S2, APC Netshelter 600mm, and APC Netshelter 800mm. It may well fit many other brands and models too.

Compatible products

HP 2530 8-port Switch Power Adapter Shelf (J9820A)

HP 2530 8-port Switch Power Adapter Shelf (J9820A)

The HP 2530 8-port Switch Power Adapter Shelf Power is an easy-to-use solution for attaching the external power adapter to any of the HP 2530 8-port switches.

Physical characteristics

6.75(w) x 5.25(d) x 1.75(h) in (17.15 x 13.34 x 4.45 cm) (1U height)
Weight: 0.6 lb (0.27 kg)

Notes

The HP 2530 8-Port Switch Power Adapter Shelf is an accessory for the HP 2530 8-port switches. The shelf mounts on the back of the switch providing a place to hold the external power adapter.

Compatible products

HP Care Packs for HP Networking

HP 2530-48G-PoE+ Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-24G-PoE+ Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-8G-PoE+ Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-48-PoE+ Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-24-PoE+ Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-8-PoE+ Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-48G Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-24G Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-8G Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-48 Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-24 Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
HP 2530-8 Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6321E)
  • 3-year, 24x7 SW phone support, software updates (UF792E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
  • 4-year, 24x7 SW phone support, software updates (UR951E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW368E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW369E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW370E)
  • 1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
  • 1-year, 24x7 software phone support, software updates (HR852E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR851E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS554E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS556E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS558E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS560E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)

HP Networking Services

Services that add value to your business

The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

Additional Support and Services

To get more details about the HP Services available in your country, please visit Networking Services

Resources

Loading Collateral...

No content available
Brochures  (0) Type Size Date
Case studies  (0) Type Size Date
Datasheets / QuickSpecs  (0) Type Size Date
Fact sheets  (0) Type Size Date
Images  (0) Type Size Date
Newsletters  (0) Type Size Date
Posters  (0) Type Size Date
Reference guides  (0) Type Size Date
Related links  (0) Type Size Date
Reports  (0) Type Size Date
Solution briefs  (0) Type Size Date
TrendWatches  (0) Type Size Date
Videos  (0) Type Size Date
Webinars  (0) Type Size Date
White papers  (0) Type Size Date
Application notes  (0) Type Size Date
Configuration guides  (0) Type Size Date
Demo how to guides  (0) Type Size Date
Design guides  (0) Type Size Date
Feature matrixes  (0) Type Size Date
Installation guides  (0) Type Size Date
Manuals  (0) Type Size Date
PoC test plans  (0) Type Size Date
Reference architectures  (0) Type Size Date
Related links  (0) Type Size Date
Software  (0) Type Size Date
Solution briefs  (0) Type Size Date
Technical guides  (0) Type Size Date
Videos  (0) Type Size Date
White papers  (0) Type Size Date