HP 2910 al Switch Series

Product overview

The HP 2910 al Switch Series consists of four switches: the HP 2910-24G al and 2910-24G-PoE+ al Switches with 24 10/100/1000 ports, and the HP 2910-48G al and 2910-48G-PoE+ al Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910 al Switch Series supports up to four optional 10 Gigabit Ethernet (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.
  • High-performance Gigabit Ethernet access switch
  • Four optional 10 GbE (CX4 and/or SFP+) ports
  • IEEE 802.3af/802.3at functionality ( PoE/PoE+)
  • Layer 2 and Layer 3 plus static IP and RIP routing
  • Lifetime warranty, sFlow, ACLs, and rate limiting

Quality of Service (QoS)

  • Traffic prioritization (IEEE 802.1p) — allows real-time traffic classification into eight priority levels mapped to eight queues
  • Layer 4 prioritization — enables prioritization based on TCP/UDP port numbers
  • Class of Service (CoS) — sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
  • Rate limiting — per-port ingress enforced maximums

Connectivity

  • 10 Gbps Ethernet connectivity — up to four optional and flexible 10-Gigabit ports (CX4 and/or SFP+), with optional interconnect kit for short-distance connectivity
  • IPv6
    • IPv6 host — allows the switches to be managed and deployed at the edge of IPv6 networks
    • Dual stack (IPv4/IPv6) — provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols
    • MLD snooping — forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network
  • IEEE 802.3af Power over Ethernet (PoE) — provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
  • IEEE 802.3at Power Over Ethernet Plus — provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
  • Pre-standard PoE support — detects and provides power to pre-standard PoE devices; see list of supported devices in the product FAQ at www.hp.com/networking/support
  • Auto-MDIX — automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
  • Dual-personality functionality — includes four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, -LH, 100-FX, 100-BX, and 1000-BX
  • Single IP Address Management — single IP address management for a virtual stack of up to 16 switches

Performance

  • High-performance architecture — 128 Gbps switching fabric with up to 95 Mpps (24-port switches) and 176 Gbps switching fabric with up to 131 Mpps (48-port switches)
  • Selectable queue configurations — allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications

Resiliency and high availability

  • IEEE 802.1s Multiple Spanning Tree — provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
  • IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking — support up to 24 trunks, each with up to 8 links (ports) per trunk
  • Optional redundant power supply — supplies backup power in case of power failure (note: HP E620 Redundant/External Power Supply provides only RPS functionality)

Manageability

  • RMON, XRMON, and sFlow — provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
  • Uni-Directional Link Detection (UDLD) — monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices
  • Command authorization — leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail
  • Dual flash images — provides independent primary and secondary operating system files for backup while upgrading
  • Multiple configuration files — allow multiple configuration files to be stored to a flash image
  • Friendly port names — allow assignment of descriptive names to ports
  • Find-Fix-Inform — finds and fixes common network problems automatically, then informs administrator
  • Software updates — free downloads from the Web
  • Troubleshooting — ingress and egress port monitoring enable network problem solving

Layer 2 switching

  • VLAN support and tagging — supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
  • GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
  • Jumbo packet support — supports up to 9220-byte frame size to improve the performance of large data transfers
  • IEEE 802.1v protocol VLANs — isolate select non-IPv4 protocols automatically into their own VLANs

Layer 3 routing

  • Static IP routing — provides manually configured routing; includes ECMP capability
  • Routing Information Protocol (RIP) — provides RIPv1 and RIPv2 routing

Security

  • Multiple user authentication methods
    • IEEE 802.1X — is an industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
    • Web-based authentication — is similar to IEEE 802.1X and provides a browser-based environment to authenticate clients that do not support the IEEE 802.1X supplicant
    • MAC-based authentication — authenticates the client with the RADIUS server based on the client's MAC address
  • Authentication flexibility
    • Multiple IEEE 802.1X users per port — provides authentication of up to eight IEEE 802.1X users per port; prevents a user from "piggybacking" on another user's IEEE 802.1X authentication
    • Concurrent IEEE 802.1X and Web or MAC authentication schemes per port — switch port will accept any IEEE 802.1X and either Web or MAC authentications
  • Access control lists (ACLs) — provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number
  • Identity-driven ACL — enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each authenticated network user
  • Dynamic ARP protection — blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
  • DHCP protection — blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
  • Port monitoring for network threats — provides sampled port traffic using sFlow technology to the HP Network Immunity Manager (NIM) application for Network Behavior Anomaly Detection (NBAD) analysis to detect and mitigate threats at the port where the threat originated
  • Source-port filtering — allows only specified ports to communicate with each other
  • RADIUS/TACACS+ — eases switch management security administration by using a password authentication server
  • Secure shell — encrypts all transmitted data for secure remote CLI access over IP networks
  • Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
  • Secure Sockets Layer (SSL) — encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
  • Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
  • MAC address lockout — prevents particular configured MAC addresses from connecting to the network
  • Switch management logon security — helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
  • STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
  • USB Secure Autorun (requires HP PCM+) — deploys, diagnoses, and updates a switch using a USB flash drive; works with a secure credential to prevent tampering
  • STP Root Guard — protects the root bridge from malicious attacks or configuration mistakes
  • Custom banner — displays security policy when users log in to the switch
  • Per-port broadcast throttling — selectively configures broadcast control on heavy traffic port uplinks

Convergence

  • IP multicast snooping and data-driven IGMP — automatically prevent flooding of IP multicast traffic
  • LLDP-MED (Media Endpoint Discovery) — is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — is an automated device discovery protocol that provides easy mapping of network management applications
  • PoE and PoE+ allocations — support multiple methods (automatic, IEEE 802.3at dynamic, LLDP-MED fine-grain, IEEE 802.3af device class, or user specified) to allocate and manage PoE/PoE+ power for more efficient energy savings

Monitor and diagnostics

  • Port mirroring — enables traffic on a port to be simultaneously sent to a network analyzer for monitoring

Warranty and support

HP 2910-24G al Switch (J9145A) HP 2910-48G al Switch (J9147A) HP 2910-24G-PoE+ al Switch (J9146A)
Ports
20 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 dual-personality ports

each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot (for use with mini-GBIC transceivers)

1 RJ-45 serial console port

Supports a maximum of 4 10GbE ports, with optional module

44 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 dual-personality ports

each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot (for use with mini-GBIC transceivers)

1 RJ-45 serial console port

Supports a maximum of 4 10GbE ports, with optional module

20 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 dual-personality ports

each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot (for use with mini-GBIC transceivers)

1 RJ-45 serial console port

Supports a maximum of 4 10GbE ports, with optional module

Physical characteristics
17.4(w) x 14.4(d) x 1.73(h) in (44.2 x 36.58 x 4.4 cm) (1U height) 17.42(w) x 14.4(d) x 1.73(h) in (44.25 x 36.58 x 4.4 cm) (1U height) 17.4(w) x 14.4(d) x 1.73(h) in (44.2 x 36.58 x 4.39 cm) (1U height)
Weight 10.92 lb (4.95 kg) 11.2 lb (5.08 kg) 12.34 lb (5.6 kg)
Memory and processor
Processor Dual ARM1156T2S @ 515 MHz, 4 MB flash, 1 GB compact flash, 512 MB SDRAM; packet buffer size: 6 MB Dual ARM1156T2S @ 515 MHz, 4 MB flash, 1 GB compact flash, 512 MB SDRAM; packet buffer size: 6 MB Dual ARM1156T2S @ 515 MHz, 4 MB flash, 1 GB compact flash, 512 MB SDRAM; packet buffer size: 6 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
1000 Mb Latency < 2.9 µs (FIFO 64-byte packets) < 2.9 µs (FIFO 64-byte packets) < 2.9 µs (FIFO)
10 Gbps Latency < 1.3 µs (FIFO 64-byte packets) < 1.3 µs (FIFO 64-byte packets) < 1.3 µs (FIFO)
Throughput up to 95 million pps (64-byte packets) up to 131 million pps up to 95 million pps
Switching capacity 128 Gbps 176 Gbps 128 Gbps
Routing table size 2000 entries (IPv4) 2000 entries (IPv4) 2000 entries (IPv4)
MAC address table size 16000 entries 16000 entries 16000 entries
Environment
Operating temperature 32°F to 131°F (0°C to 55°C) 32°F to 131°F (0°C to 55°C) 32°F to 131°F (0°C to 55°C)
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity 15% to 95% @ 149°F (65°C), noncondensing 15% to 95% @ 149°F (65°C), noncondensing 15% to 95% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft (3 km) up to 10,000 ft (3 km) up to 10,000 ft (3 km)
Acoustic Power: 53.5 dB, Pressure: 39.4 dB; DIN 45635T.19 per ISO 7779 Power: 53.5 dB, Pressure: 39.4 dB; DIN 45635T.19 per ISO 7779 Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T.19 per ISO 7779
Electrical characteristics
Frequency 50/60 Hz 50/60 Hz 50/60 Hz
Achieved Miercom Certified Green Award
Description The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz
Maximum heat dissipation 279 BTU/hr (295 kJ/hr) 356 BTU/hr (376 kJ/hr) 447 BTU/hr (472 kJ/hr), max. using PoE+
Voltage 100-127/200-240 VAC 100-127/200-240 VAC 100-127/200-240 VAC
Current 1.7/0.9 A 2.1/1.1 A 6.1/3.1 A
Maximum power rating 82 W 105 W 490 W
Idle power 49 W 64 W 65 W
PoE power 382 W
Notes Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).
Safety
EN 60950/IEC 60950CAN/CSA 22.2 No. 60950EN 60825UL 60950 EN 60950/IEC 60950CAN/CSA 22.2 No. 60950EN 60825UL 60950 EN 60950/IEC 60950CAN/CSA 22.2 No. 60950EN 60825UL 60950
Notes
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.
HP 2910-48G-PoE+ al Switch (J9148A)
Ports
44 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 dual-personality ports

each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot (for use with mini-GBIC transceivers)

1 RJ-45 serial console port

Supports a maximum of 4 10GbE ports, with optional module

Physical characteristics
17.42(w) x 14.4(d) x 1.73(h) in (44.25 x 36.58 x 4.39 cm) (1U height)
Weight 12.96 lb (5.88 kg)
Memory and processor
Processor Dual ARM1156T2S @ 515 MHz, 4 MB flash, 1 GB compact flash, 512 MB SDRAM; packet buffer size: 6 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
1000 Mb Latency < 2.9 µs (FIFO)
10 Gbps Latency < 1.3 µs (FIFO)
Throughput up to 131 million pps
Switching capacity 176 Gbps
Routing table size 2000 entries (IPv4)
MAC address table size 16000 entries
Environment
Operating temperature 32°F to 131°F (0°C to 55°C)
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity 15% to 95% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft (3 km)
Acoustic Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T.19 per ISO 7779
Electrical characteristics
Frequency 50/60 Hz
Description The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz
Maximum heat dissipation 667 BTU/hr (704 kJ/hr), max. using PoE+
Voltage 100-127/200-240 VAC
Current 6.4/3.2 A
Maximum power rating 556 W
Idle power 89 W
PoE power 382 W
Notes Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).
Safety
EN 60950/IEC 60950CAN/CSA 22.2 No. 60950EN 60825UL 60950
Notes
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

Emissions

FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A

Immunity

EN: EN 55024, CISPR 24

ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated: IEC 61000-4-3; 3 V/m

EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge: IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC

Conducted: IEC 61000-4-6; 3 V

Power frequency magnetic field: IEC 61000-4-8; 1 A/m

Voltage dips and interruptions: IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods

Harmonics: IEC 61000-3-2

Flicker: IEC 61000-3-3

Management

HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management (serial RS-232C)

Standards and protocols

Device management
  • RFC 1591 DNS (client)
  • HTML and telnet management
General protocols
  • IEEE 802.1D MAC Bridges
  • IEEE 802.1p Priority
  • IEEE 802.1Q VLANs
  • IEEE 802.1s Multiple Spanning Trees
  • IEEE 802.1v VLAN classification by Protocol and Port
  • IEEE 802.1w Rapid Reconfiguration of Spanning Tree
  • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • IEEE 802.3x Flow Control
  • RFC 768 UDP
  • RFC 783 TFTP Protocol (revision 2)
  • RFC 792 ICMP
  • RFC 793 TCP
  • RFC 826 ARP
  • RFC 854 TELNET
  • RFC 868 Time Protocol
  • RFC 951 BOOTP
  • RFC 1058 RIPv1
  • RFC 1350 TFTP Protocol (revision 2)
  • RFC 2030 Simple Network Time Protocol (SNTP) v4
  • RFC 2131 DHCP
  • RFC 2453 RIPv2
  • RFC 3046 DHCP Relay Agent Information Option
IP multicast
  • RFC 3376 IGMPv3 (host joins only)
IPv6
  • RFC 1981 IPv6 Path MTU Discovery
  • RFC 2460 IPv6 Specification
  • RFC 2710 Multicast Listener Discovery (MLD) for IPv6
  • RFC 2925 Remote Operations MIB (Ping only)
  • RFC 3019 MLDv1 MIB
  • RFC 3315 DHCPv6 (client only)
  • RFC 3513 IPv6 Addressing Architecture
  • RFC 3596 DNS Extension for IPv6
  • RFC 3810 MLDv2 (host joins only)
  • RFC 4022 MIB for TCP
  • RFC 4113 MIB for UDP
  • RFC 4251 SSHv6 Architecture
  • RFC 4252 SSHv6 Authentication
  • RFC 4253 SSHv6 Transport Layer
  • RFC 4254 SSHv6 Connection
  • RFC 4293 MIB for IP
  • RFC 4419 Key Exchange for SSH
  • RFC 4443 ICMPv6
  • RFC 4541 IGMP & MLD Snooping Switch
  • RFC 4861 IPv6 Neighbor Discovery
  • RFC 4862 IPv6 Stateless Address Auto-configuration
MIBs
  • RFC 1213 MIB II
  • RFC 1493 Bridge MIB
  • RFC 1724 RIPv2 MIB
  • RFC 2021 RMONv2 MIB
  • RFC 2613 SMON MIB
  • RFC 2618 RADIUS Client MIB
  • RFC 2620 RADIUS Accounting MIB
  • RFC 2665 Ethernet-Like-MIB
  • RFC 2668 802.3 MAU MIB
  • RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
  • RFC 2737 Entity MIB (Version 2)
  • RFC 2863 The Interfaces Group MIB
  • RFC 2925 Ping MIB
Network management
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  • RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
  • RFC 3176 sFlow
  • ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
  • SNMPv1/v2c/v3
  • XRMON
QoS/CoS
  • RFC 2474 DiffServ Precedence, including 8 queues/port
  • RFC 2597 DiffServ Assured Forwarding (AF)
  • RFC 2598 DiffServ Expedited Forwarding (EF)
  • Ingress Rate Limiting
Security
  • IEEE 802.1X Port Based Network Access Control
  • RFC 1492 TACACS+
  • RFC 2138 RADIUS Authentication
  • RFC 2866 RADIUS Accounting
  • Secure Sockets Layer (SSL)

Notes

2910al switches support SFP+ ER transceiver (J9153A) and 10m and 15m Direct Attach Copper Cables (J9286B and J9287B respectively) with W.15.07.0002 or later software.

HP 2-port 10GbE CX4 al Module (J9149A)

HP 2-port 10GbE CX4 al Module (J9149A)

10-GbE module with two fixed CX4 ports for HP E2910 al Switch Series

Ports

2 CX4 10-GbE ports (IEEE 802.3ak Type 10GBASE-CX4)
Duplex: full only

Physical characteristics

Dimensions: 4.11(d) x 4.18(w) x 1.4(h) in. (10.44 x 10.62 x 3.56 cm)
Weight: 0.35 lb. (0.16 kg)

Environment

Operating temperature: 32°F to 122°F (0°C to 50°C)
Operating relative humidity: 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing

Cabling

Maximum distance:
  • 15 m using CX4 cable
  • 300 m using optical media converters and multimode fiber cable

Notes

Use CX4 10-GbE cable (0.5 m-15 m) or HP ProCurve 10-GbE CX4 Media Converter (J8439A). No CX4 cables are included with this module.

Compatible products

HP 2-port 10GbE SFP+ al Module (J9008A)

HP 2-port 10GbE SFP+ al Module (J9008A)

10 GbE module with two fixed SFP+ slots for HP E2910 al Switch Series

Ports

2 open 10-GbE SFP+ transceiver slots

Physical characteristics

Dimensions: 4.0(d) x 4.18(w) x 1.4(h) in. (10.16 x 10.62 x 3.56 cm)
Weight: 0.35 lb. (0.16 kg)

Environment

Operating temperature: 32°F to 122°F (0°C to 50°C)
Operating relative humidity: 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing

Compatible products

HP 10GbE al Switch Interconnect Kit (J9165A)

HP 10GbE al Switch Interconnect Kit (J9165A)

Two 1 port CX4 modules for short distance interconnection - includes 1/2 meter CX4 cable - for HP Switch 2910al series

Physical characteristics

Dimensions: 4.11(d) x 4.18(w) x 1.4(h) in. (10.44 x 10.62 x 3.56 cm)
Weight: 0.31 lb. (0.14 kg)

Environment

Operating temperature: 32°F to 122°F (0°C to 50°C)
Operating relative humidity: 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing

Notes

ProCurve Switch bl 10-GbE Interconnect Kit includes two 1-port 10-GbE CX4 compatible Interconnect modules for short-distance connectivity using the 0.5 m CX4 cable provided. The ports support a maximum distance of 3m over standard CX4 cables.

Compatible products

HP X111 100M SFP LC FX Transceiver (J9054C)

HP X111 100M SFP LC FX Transceiver (J9054C)

A small form-factor pluggable (SFP) 100Base-FX transceiver that provides 100 Mbps full-duplex connectivity up to 2 km on multimode fiber.

Ports

1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX)
Duplex: half or full

Physical characteristics

Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2 km (full duplex) or 412 m (half duplex)

Notes

Transmitter wavelength: 1310nm

Power consumption is 1.1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J9054B 100-FX SFP-LC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

Compatible products

HP X112 100M SFP LC BX-D Transceiver (J9099B)

HP X112 100M SFP LC BX-D Transceiver (J9099B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "downstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D)
Duplex: full only

Physical characteristics

Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)
Weight: 0.04 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.

Power consumption is 1.1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver can only connect to a 100-BX-U product. You cannot connect two 100-BX-D transceivers together.)

Compatible products

HP X112 100M SFP LC BX-U Transceiver (J9100B)

HP X112 100M SFP LC BX-U Transceiver (J9100B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "upstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U)
Duplex: full only

Physical characteristics

Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)
Weight: 0.07 lb. (.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U transceiver can only connect to a 100-BX-D product. You cannot connect two 100-BX-U transceivers together.)

Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.

Power consumption is 1.1 watts maximum.

Compatible products

HP X121 1G SFP LC SX Transceiver (J4858C)

HP X121 1G SFP LC SX Transceiver (J4858C)

A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.

Ports

1 LC 1000BASE-SX port
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2-220m with 62.5 µm core diameter, 160 MHz*km bandwidth
  • 2-275m with 62.5 µm core diameter, 200 MHz*km bandwidth
  • 2-500m with 50 µm core diameter, 400 MHz*km bandwidth
  • 2-550m with 50 µm core diameter, 500 MHz*km bandwidth

Cable length: 2-550m
Fiber type: Multi Mode

Compatible products

HP X121 1G SFP LC LX Transceiver (J4859C)

HP X121 1G SFP LC LX Transceiver (J4859C)

A small form-factor pluggable (SFP) Gigabit LX transceiver that provides a full-duplex Gigabit solution up to 10 km (single-mode) or 550 m (multimode).

Ports

1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:
  • Either single mode or multimode
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth)
  • 2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth)
  • 2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth)
  • 2-10,000 m (single-mode fiber)

Notes

A mode conditioning patch cord may be needed in some multimode fiber installations.

Wavelength: 1310nm

Power Consumption: < 500mW Typical

Compatible products

HP X121 1G SFP LC LH Transceiver (J4860C)

HP X121 1G SFP LC LH Transceiver (J4860C)

A small form-factor pluggable (SFP) Gigabit LH (ZX) transceiver that provides a full-duplex Gigabit solution up to 80 km on single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Duplex: full only

Physical characteristics

Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: -40°F to 185°F (-40°C to 85°C)
Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 10-80,000 m (single-mode fiber)

Fiber type: Single Mode

Notes

Power consumption is 0.8 watts typical with 1 watt maximum at 100% utilization.

For distances less than 20 km, a 10 dB attenuator must be used.

For distances between 20 km and 40 km, a 5 dB attenuator must be used.

Attenuators can be purchased from most cable vendors.

Compatible products

HP X122 1G SFP LC BX-D Transceiver (J9142B)

HP X122 1G SFP LC BX-D Transceiver (J9142B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "downstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D)
Duplex: full only

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.

Power consumption is 1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9142B connects to the J9143B "upstream" transceiver, or to any IEEE-standard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D transceiver can only connect to a 1000-BX-U product. You cannot connect two 1000-BX-D transceivers together.)

Compatible products

HP X122 1G SFP LC BX-U Transceiver (J9143B)

HP X122 1G SFP LC BX-U Transceiver (J9143B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "upstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U)
Duplex: full only

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U transceiver can only connect to a 1000-BX-D product. You cannot connect two 1000-BX-U transceivers together.)

Power consumption is 1 watt maximum.

Compatible products

HP X132 10G SFP+ LC SR Transceiver (J9150A)

HP X132 10G SFP+ LC SR Transceiver (J9150A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 m on multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-SR)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.6 W
Power consumption maximum: 0.8 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2-26m with 62.5 µm multimode cable @ 160 MHz*km
  • 2-33m with 62.5 µm multimode cable @ 200 MHz*km
  • 2-66m with 50 µm multimode cable @ 400 MHz*km
  • 2-82m with 50 µm multimode cable @ 500 MHz*km
  • 2-300m with 50 µm multimode cable @ 2000 MHz*km

Cable length: 2-300m
Fiber type: Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC LRM Transceiver (J9152A)

HP X132 10G SFP+ LC LRM Transceiver (J9152A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LRM standard, for 10-Gigabit connectivity up to 220 m on legacy multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.7 W
Power consumption maximum: 1 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations)

Maximum distance:

  • 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
  • 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
  • 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
  • 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
  • 0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km

Cable length: 0.5m to 220m
Fiber type: Multi Mode

Notes

For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the maximum distances listed above.

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC LR Transceiver (J9151A)

HP X132 10G SFP+ LC LR Transceiver (J9151A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on single-mode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.9 W
Power consumption maximum: 1 W

Cabling

Cable type:
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 2m-10km with 9/125 µm single-mode cable

Cable length: 2m to 10km
Fiber type: Single Mode

Notes

Conditioning patch cord cables are not supported.

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC ER Transceiver (J9153A)

HP X132 10G SFP+ LC ER Transceiver (J9153A)

HP X132 10G SFP+ LC ER Transceiver: The SFP+ ER transceiver transmits 10Gbps of data up to a 40km distance over single mode fiber cable.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-ER)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

0.55(w) x 2.22(d) x 0.47(h) in (1.39 x 5.65 x 1.19 cm)
Weight: 0.04 lb (0.02 kg), Fully loaded
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Power consumption typical: 1.3 W
Power consumption maximum: 1.5 W

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 40km

Fiber type: Single Mode

Notes

Check switch release notes for minimum version of software required to support this transceiver.

Some switches have limits as to how many of this particular transceiver can be installed. See the release notes of the switch software/firmware being used for more details.

This transceiver is supported in 2910al switches with software release W.15.07.0002 or later.

Compatible products

HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable (J9281B)

HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable (J9281B)

A low-price 10-Gigabit connectivity option consisting of a 1 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 3.28 ft. (1 m)

Physical characteristics

Weight: .24 lb. (0.11 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (J9283B)

HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (J9283B)

A low-price 10-Gigabit connectivity option consisting of a 3 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 10 ft. (3 m)

Physical characteristics

Weight: .49 lb. (0.22 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable (J9285B)

HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable (J9285B)

A low-price 10-Gigabit connectivity option consisting of a 7 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 22.97 ft. (7 m)

Physical characteristics

Weight: 1.02 lb., Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable (J9286B)

HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable (J9286B)

A low-price 10-Gigabit connectivity option consisting of a 10m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 32.82 ft. (10 m)

Physical characteristics

15(w) x 12(d) x 3(h) in (38.1 x 30.48 x 7.62 cm)
Weight: 0.99 lb (0.45 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 23°F to 185°F (-5°C to 85°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Maximum power rating: 1.2 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
0.6 watts maximum per transceiver end

Notes

Electrical Properties:
  • Cable Characteristic Impedance: 100 ohms
Physical Properties:
  • Cable Diameter: 0.185"
  • Minimum Cable Bend Radius: .555"
This cables is supported on 2910al switches with W.15.07.0002 or later software.

Compatible products

HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable (J9287B)

HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable (J9287B)

A low-price 10-Gigabit connectivity option consisting of a 15m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 49.20 ft. (15 m)

Physical characteristics

15(w) x 12(d) x 3(h) in (38.1 x 30.48 x 7.62 cm)
Weight: 1.74 lb (0.79 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 23°F to 185°F (-5°C to 85°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Maximum power rating: 1.2 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
0.6 watts maximum per transceiver end

Notes

Electrical Properties:
  • Cable Characteristic Impedance: 100 ohms
Physical Properties:
  • Cable Diameter: 0.255"
  • Minimum Cable Bend Radius: 0.765"
This cable is supported on 2910al switches with W.15.07.002 or later software.

Compatible products

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber and designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable (BK837A)

HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable (BK837A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH) thermoplastic.
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also has a longitudal white stripe that runs the entire length of the cable.
  • Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46

Compatible products

HP 1 m PremierFlex OM3+ LC/LC Optical Cable (BK838A)

HP 1 m PremierFlex OM3+ LC/LC Optical Cable (BK838A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 2 m PremierFlex OM3+ LC/LC Optical Cable (BK839A)

HP 2 m PremierFlex OM3+ LC/LC Optical Cable (BK839A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 5 m PremierFlex OM3+ LC/LC Optical Cable (BK840A)

HP 5 m PremierFlex OM3+ LC/LC Optical Cable (BK840A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 15 m PremierFlex OM3+ LC/LC Optical Cable (BK841A)

HP 15 m PremierFlex OM3+ LC/LC Optical Cable (BK841A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 30 m PremierFlex OM3+ LC/LC Optical Cable (BK842A)

HP 30 m PremierFlex OM3+ LC/LC Optical Cable (BK842A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 50 m PremierFlex OM3+ LC/LC Optical Cable (BK843A)

HP 50 m PremierFlex OM3+ LC/LC Optical Cable (BK843A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP BLc SFP+ 0.5m 10GbE Copper Cable (487649-B21)

HP BLc SFP+ 0.5m 10GbE Copper Cable (487649-B21)

A low-price 10-Gigabit connectivity option consisting of a 0.5m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 1.64 ft. (0.5 m)

Physical characteristics

Weight: .18 lb. (0.08 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP BLc SFP+ 1m 10GbE Copper Cable (487652-B21)

HP BLc SFP+ 1m 10GbE Copper Cable (487652-B21)

A low-price 10-Gigabit connectivity option consisting of a 1m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 3.28 ft. (1 m)

Physical characteristics

Weight: .24 lb. (0.11 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP BLc SFP+ 3m 10GbE Copper Cable (487655-B21)

HP BLc SFP+ 3m 10GbE Copper Cable (487655-B21)

A low-price 10-Gigabit connectivity option consisting of a 3m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 9.84 ft. (3 m)

Physical characteristics

Weight: 0.49 lb. (0.22 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP BLc SFP+ 5m 10GbE Copper Cable (537963-B21)

HP BLc SFP+ 5m 10GbE Copper Cable (537963-B21)

A low-price 10-Gigabit connectivity option consisting of a 5m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 16.40 ft. (5 m)

Physical characteristics

Weight: 0.75 lb. (0.34 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP BLc SFP+ 7m 10GbE Copper Cable (487658-B21)

HP BLc SFP+ 7m 10GbE Copper Cable (487658-B21)

A low-price 10-Gigabit connectivity option consisting of a 7m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 22.96 ft. (7 m)

Physical characteristics

Weight: 1.01 lb. (0.46 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP 620 Redundant/External Power Supply (J8696A)

HP 620 Redundant/External Power Supply (J8696A)

Provides redundant system power and/or extra PoE power for up to two switches simultaneously

Ports

2 redundant power supply ports
Restrictions: 195 W available per port
2 external power supply ports
Restrictions: 398 W available per port

Physical characteristics

Dimensions: 15.4(d) x 17.4(w) x 1.73(h) in. (39.12 x 44.2 x 4.39 cm) (1U height)
Weight: 15.2 lb. (6.89 kg)

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C)
Operating relative humidity: 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 90% @ 149°F (65°C), noncondensing
Altitude: up to 10,000 ft. (3 km)
Acoustic: LwA per ISO 7779: 54.2 dB

Electrical characteristics

Maximum heat dissipation: 400 BTU/hr (422 kJ/hr), for the actual 620 itself. PoE-powered device heat dissipation assumed to be outside the 620.
Voltage: 100-127/200-240 VAC
Current: 16/8 A
Maximum power rating: 1440 W
RPS power: 390 W
PoE power: 796 W
RPS: 12 V
PoE: -50 V
Frequency: 50/60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Above figures are for maximum RPS and PoE power being supplied to two switches simultaneously. 200 - 240 V power cords shipped with the 620 have a wall plug rated as close to 13 A as specific country standards allow.

Safety

CSA 22.2 No. 60950
EN 60950/IEC 60950
UL 60950

Emissions

FCC Class A
VCCI Class A
EN 55022/CISPR 22 Class A

Immunity

EN: EN 55024, CISPR 24
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: EN 61000-3-2, IEC 61000-3-2
Flicker: EN 61000-3-3, IEC 61000-3-3

Management

Unmanaged power supply; provides information via LEDs (LEDs repeated on front and back panel) or through port interfaces of attached devices

Notes

The ProCurve 620 supports the HP ProCurve Switch 2900 Series (RPS) and 3500yl Series (RPS/PoE), as well as 6200yl (RPS) switches. The HP ProCurve Switch 5400zl Series is not supported.

The ProCurve 620 includes four 2 m RPS/EPS cables. These cables can be used to carry either RPS or PoE power to the switch being powered.

Compatible products

HP 630 Redundant and/or External Power Supply (J9443A)

HP 630 Redundant and/or External Power Supply (J9443A)

HP 630 Redundant and/or External Power Supply provides redundant system power and / or extra PoE/PoE+ power to attached PoE+ switches

Physical characteristics

Dimensions: 15(d) x 8.5(w) x 1.73(h) in. (38.1 x 21.59 x 4.39 cm) (1U height)
Weight: 7.9 lb. (3.58 kg)

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C)
Operating relative humidity: 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 90% @ 149°F (65°C), noncondensing
Altitude: up to 10,000 ft. (3 km)
Acoustic: Power: 54.2 dB; ISO 7779, ISO 9296

Electrical characteristics

Maximum heat dissipation: 535 BTU/hr (564.42 kJ/hr), for the actual 630 power supply. PoE-powered device heat dissipation assumed to be outside the 630 power supply.
Voltage: 100-127/200-240 VAC
Current: 8/4 A
Maximum power rating: 740 W
PoE power: 398 W
RPS power: 185 W
PoE power: 398 W
Frequency: 50/60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of a External Power Supply (EPS).
200-240 V power cords shipped with the 630 power supply have a wall plug rated as close to 13 A as specific country standards allow.

Notes

The HP ProCurve 630 RPS/EPS supports the HP ProCurve 2910al and 3500yl-PoE+ Switches. The HP ProCurve Switch 5400zl Series is not supported.

The 630 RPS/EPS includes two 2-m RPS/EPS cables, which can bes used to carry either RPS or PoE+ power to the switch.

Minimum software versions required: 2910al PoE+ switches require W.14.35 or later and 3500yl-PoE+ switches require K.14.52 or later

Compatible products

HP X410 1U Universal 4-post Rack Mounting Kit (J9583A)

HP X410 1U Universal 4-post Rack Mounting Kit (J9583A)

This rack mounting kit can be used to install a variety of 1U switches into a variety of 4 post racks. It supports both side to side air flow as well as front to back air flow.

Notes

The rack mounting kit supports the 1U, full width switches in the following switch series and the power supply: V1810 Series, E2510 Series, E2520 Series, E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the E620 Power Supply

This universal rack mounting kit is design to fit the following racks: HP 10K 10642, HP 10K 10842, Panduit CN, Panduit CS, Wrightline Vantage S2, APC Netshelter 600mm, and APC Netshelter 800mm. It may well fit many other brands and models too.

Compatible products

HP 2910 al Switch Series

HP Care Packs for HP Networking

HP 2910-24G al Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U2855E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U2856E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6304E)
  • 3-year, 24x7 SW phone support, software updates (UE262E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR889E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR890E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR891E)
  • Installation with minimum configuration, system-based pricing (U4826E)
  • Installation with HP-provided configuration, system-based pricing (U4830E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR868E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR869E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR870E)
  • 4-year, 24x7 SW phone support, software updates (UR871E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR872E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR873E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR874E)
  • 5-year, 24x7 SW phone support, software updates (UR875E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW356E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW357E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW358E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR893E)
  • 1-year, 24x7 software phone support, software updates (HR892E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS610E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS611E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS612E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS613E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS614E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS615E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS616E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS617E)
HP 2910-48G al Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (H4496E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (H2893E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6319E)
  • 3-year, 24x7 SW phone support, software updates (UE264E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR894E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR895E)
  • Installation with minimum configuration, system-based pricing (U4826E)
  • Installation with HP-provided configuration, system-based pricing (U4830E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR884E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR885E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR886E)
  • 4-year, 24x7 SW phone support, software updates (UR887E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR888E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR889E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR890E)
  • 5-year, 24x7 SW phone support, software updates (UR891E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW365E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW366E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW367E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR898E)
  • 1-year, 24x7 software phone support, software updates (HR897E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR896E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS618E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS619E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS620E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS621E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS622E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS623E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS624E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS625E)
HP 2910-24G-PoE+ al Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U2855E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U2856E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6304E)
  • 3-year, 24x7 SW phone support, software updates (UE262E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR889E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR890E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR891E)
  • Installation with minimum configuration, system-based pricing (U4826E)
  • Installation with HP-provided configuration, system-based pricing (U4830E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR868E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR869E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR870E)
  • 4-year, 24x7 SW phone support, software updates (UR871E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR872E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR873E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR874E)
  • 5-year, 24x7 SW phone support, software updates (UR875E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW356E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW357E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW358E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR893E)
  • 1-year, 24x7 software phone support, software updates (HR892E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS610E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS611E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS612E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS613E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS614E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS615E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS616E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS617E)
HP 2910-48G-PoE+ al Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (H4496E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (H2893E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6319E)
  • 3-year, 24x7 SW phone support, software updates (UE264E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR894E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR895E)
  • Installation with minimum configuration, system-based pricing (U4826E)
  • Installation with HP-provided configuration, system-based pricing (U4830E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR884E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR885E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR886E)
  • 4-year, 24x7 SW phone support, software updates (UR887E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR888E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR889E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR890E)
  • 5-year, 24x7 SW phone support, software updates (UR891E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW365E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW366E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW367E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR898E)
  • 1-year, 24x7 software phone support, software updates (HR897E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR896E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS618E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS619E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS620E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS621E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS622E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS623E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS624E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS625E)

HP Networking Services

Services that add value to your business

The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

Additional Support and Services

To get more details about the HP Services available in your country, please visit Networking Services

Resources

Loading Collateral...

No content available
Brochures  (0) Type Size Date
Case studies  (0) Type Size Date
Datasheets / QuickSpecs  (0) Type Size Date
Fact sheets  (0) Type Size Date
Images  (0) Type Size Date
Newsletters  (0) Type Size Date
Posters  (0) Type Size Date
Reference guides  (0) Type Size Date
Related links  (0) Type Size Date
Reports  (0) Type Size Date
Solution briefs  (0) Type Size Date
TrendWatches  (0) Type Size Date
Videos  (0) Type Size Date
Webinars  (0) Type Size Date
White papers  (0) Type Size Date
Application notes  (0) Type Size Date
Configuration guides  (0) Type Size Date
Demo how to guides  (0) Type Size Date
Design guides  (0) Type Size Date
Feature matrixes  (0) Type Size Date
Installation guides  (0) Type Size Date
Manuals  (0) Type Size Date
PoC test plans  (0) Type Size Date
Reference architectures  (0) Type Size Date
Related links  (0) Type Size Date
Software  (0) Type Size Date
Solution briefs  (0) Type Size Date
Technical guides  (0) Type Size Date
Videos  (0) Type Size Date
White papers  (0) Type Size Date