HP 5120 EI Switch Series

The HP 5120 EI Switch Series are Gigabit Ethernet switches that support static Layer 3 routing, diversified services, and IPv6 forwarding.

Close News FinderContact us

Click to enlarge or download images

HP 5120 EI Switch Series

Product overview

The HP 5120 EI Switch Series is comprised of Gigabit Ethernet switches that support static Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide up to four 10-Gigabit Ethernet (10 GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers. High scalability provides investment protection with two expansion slots, each of which can support two-port 10 GbE expansion modules. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.

High scalability for investment protection
Support for multiple services
Comprehensive security control policies
Diversified Quality of Service (QoS) policies
Excellent manageability

HP 5120 EI Switch Series

» Quality of Service (QoS)
» Management
» Connectivity
» Performance
» Resiliency and high availability

» Layer 2 switching
» Layer 3 services
» Layer 3 routing
» Security
» Convergence

» Device support
» Additional information
» Warranty and support

Quality of Service (QoS)

Broadcast control — allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Advanced classifier-based QoS — classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch
Powerful QoS feature — supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR
Traffic policing — supports Committed Access Rate (CAR) and line rate

» Back to top

Management

Friendly port names — allow assignment of descriptive names to ports
Remote configuration and management — is available through a secure Web browser or a CLI
Manager and operator privilege levels — enable read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
Command authorization — leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail
Secure Web GUI — provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
Multiple configuration files — can be stored to the flash image
Complete session logging — provides detailed information for problem identification and resolution
SNMPv1, v2c, and v3 — facilitate centralized discovery, monitoring, and secure management of networking devices
Remote monitoring (RMON) — uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group
IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
sFlow (RFC 3176) — provides scalable ASIC-based wire-speed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
Management VLAN — segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and SNMP
Remote Intelligent Mirroring — mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
Device Link Detection Protocol (DLDP) — monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, this prevents network problems such as loops
IPv6 management — provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6
Troubleshooting — ingress and egress port monitoring enable network problem solving; virtual cable tests provide visibility into cable problems

» Back to top

Connectivity

Auto-MDIX — automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Flow control — provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
Jumbo packet support — supports up to 9216-byte frame size to improve the performance of large data transfers
High-density connectivity — provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Layer 3 switch
Optional 10 GbE ports — through the use of optional modules, additional 10 GbE connections are available for uplinks or high-bandwidth server connections; flexibly supports XFP, SFP+, or CX4 local connections
IEEE 802.3at Power over Ethernet (PoE+) support — simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
Ethernet OAM (IEEE 802.3ah) — operations, administration and maintenance (OAM) management capability detects data link layer problems that occurred in the "last mile"; monitors the status of the link between the two devices
High-bandwidth CX4 local stacking — when stacked using CX4 local stacking, achieves 12 Gbps per connection, allowing for up to 96 Gbps total stacking bandwidth (full duplex) in a resilient stacking configuration

» Back to top

Performance

Nonblocking architecture — up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput
Hardware-based wire-speed access control lists (ACLs) — feature-rich ACL implementation (TCAM-based) helps provide high levels of security and ease of administration without impacting network performance

» Back to top

Resiliency and high availability

Separate data and control paths — keeps control separated from services and keeps service processing isolated; increases security and performance
External redundant power supply — provides high reliability
Smart link — allows 50 ms failover between links
Spanning Tree/MSTP, RSTP — provides redundant links while preventing network loops
Rapid Ring Protection Protocol (RRPP) — connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications
Intelligent Resilient Framework (IRF) — creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router; switches do not have to be co-located and can be part of a disaster recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation

» Back to top

Layer 2 switching

16K MAC address table — provides access to many Layer 2 devices
VLAN support and tagging — support IEEE 802.1Q with 4,094 simultaneous VLAN IDs
GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
IEEE 802.1ad QinQ and Selective QinQ — increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network
10GbE port aggregation — allows grouping of ports to increase overall data throughput to a remote device
Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping — effectively control and manage the flooding of multicast packets in a Layer 2 network

» Back to top

Layer 3 services

Address Resolution Protocol (ARP) — determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Dynamic Host Configuration Protocol (DHCP) — simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP operation across subnets
Loopback interface address — defines an address that can always be reachable, improving diagnostic capability
User Datagram Protocol (UDP) helper function — allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
Route maps — provide more control during route redistribution; allow filtering and altering of route metrics

» Back to top

Layer 3 routing

Static IP routing — provides manually configured routing for both IPv4 and IPv6 networks

» Back to top

Security

Access control lists (ACLs) — provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL
IEEE 802.1X — industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
MAC-based authentication — client is authenticated with the RADIUS server based on the client's MAC address
Identity-driven security and access control —
- Per-user ACLs — permits or denies user access to specific network resources based on user identity and time of day, allowing multiple types of users on the same network to access specific network services without risking network security or providing unauthorized access to sensitive data
- Automatic VLAN assignment — automatically assigns users to the appropriate VLAN based on their identities
Secure management access — securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
Guest VLAN — similar to IEEE 802.1X, it provides a browser-based environment to authenticated clients
Endpoint Admission Defense (EAD) — provides security policies to users accessing a network
Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
Port isolation — secures and adds privacy, and prevents malicious attackers from obtaining user information
STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
STP Root Guard — protects the root bridge from malicious attacks or configuration mistakes
DHCP protection — blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
IP Source Guard — helps prevent IP spoofing attacks
Dynamic ARP protection — blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
RADIUS/HWTACACS — eases switch management security administration by using a password authentication server

» Back to top

Convergence

IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — is an automated device discovery protocol that provides easy mapping of network management applications
LLDP-MED — is a standard extension that automatically configures network devices, including LLDP-capable IP phones
LLDP-CDP compatibility — receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
IEEE 802.3af Power over Ethernet — provides up to 15.4 W per port to PoE-powered devices such as IP phones, wireless access points, and video cameras
PoE allocations — support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient energy savings
Voice VLAN — automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
IP multicast snooping (data-driven IGMP) — automatically prevents flooding of IP multicast traffic

» Back to top

Device support

Cisco prestandard PoE support — detects and provides power to Cisco's prestandard PoE devices such as wireless LAN access points and IP phones

» Back to top

Additional information

Green IT and power — use the latest advances in silicon development, shut off unused ports, and use variable-speed fans to improve energy efficiency
Green initiative support — provides support for RoHS and WEEE regulations

» Back to top

Warranty and support

Lifetime warranty — for as long as you own the product with advance replacement and next-business-day delivery (available in most countries)†
Electronic and telephone support — limited electronic and telephone support is available from HP; to reach our support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary
Software releases — to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary

» Back to top

HP 5120 EI Switch Series

»5120-48G EI Switch with 2 Interface Slots (JE069A)
»5120-48G EI Switch (JE067A)
»5120-24G EI Switch with 2 Interface Slots (JE068A)
»5120-24G EI Switch (JE066A)

»5120-48G-PoE+ EI Switch with 2 Interface Slots (JG237A)
»5120-24G-PoE+ EI Switch with 2 Interface Slots (JG236A)

	HP 5120-48G EI Switch with 2 Interface Slots (JE069A)	HP 5120-48G EI Switch (JE067A)	HP 5120-24G EI Switch with 2 Interface Slots (JE068A)
Ports
	48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 dual-personality ports autosensing 10/100/1000BASE-T or SFP 2 port expansion module slots 1 RJ-45 serial console port Supports a maximum of 48 autosensing 10/100/1000 ports	48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 dual-personality ports autosensing 10/100/1000BASE-T or SFP 1 RJ-45 serial console port Supports a maximum of 48 autosensing 10/100/1000 ports	24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 dual-personality ports autosensing 10/100/1000BASE-T or SFP 2 port expansion module slots 1 RJ-45 serial console port
Physical characteristics
	17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height)	17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.37 cm) (1U height)	17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.37 cm) (1U height)
Weight	11.02 lb (5 kg)	11.02 lb (5 kg)	9.92 lb (4.5 kg)
Memory and processor
	128 MB SDRAM, 16 MB flash; packet buffer size: 4 MB	128 MB SRAM, 16 MB flash; packet buffer size: 4 MB	128 MB SDRAM, 16 MB flash; packet buffer size: 2 MB
Mounting
	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency	< 3.2 µs	< 3.2 µs	< 3.2 µs
10 Gbps Latency	< 2.6 µs		< 2.6 µs
Throughput	142.9 million pps	71.4 million pps	107.2 million pps
Routing/Switching capacity	192 Gbps	96 Gbps	144 Gbps
Routing table size	32 entries	32 entries	32 entries
Environment
Operating temperature	32°F to 113°F (0°C to 45°C)	32°F to 113°F (0°C to 45°C)	32°F to 113°F (0°C to 45°C)
Operating relative humidity	10% to 90%, noncondensing	10% to 90%, noncondensing	10% to 90%, noncondensing
Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity	5% to 95%, noncondensing	5% to 95%, noncondensing	5% to 95%, noncondensing
Electrical characteristics
Maximum heat dissipation	495 BTU/hr (522.23 kJ/hr)	375 BTU/hr (395.63 kJ/hr)	362 BTU/hr (381.91 kJ/hr)
Voltage	100-240 VAC	100-240 VAC	100-240 VAC
Idle power	55 W	54 W	36 W
Maximum power rating	145 W	110 W	106 W
Frequency	50/60 Hz	50/60 Hz	50/60 Hz
Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Safety
	UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1AnatelULARGOSTEN 60950-1/A11FDA 21 CFR Subchapter JNOMROHS Compliance	UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1AnatelULARGOSTEN 60950-1/A11FDA 21 CFR Subchapter JNOMROHS Compliance	UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1AnatelULARGOSTEN 60950-1/A11FDA 21 CFR Subchapter JNOMROHS Compliance

» Back to top

	HP 5120-24G EI Switch (JE066A)	HP 5120-48G-PoE+ EI Switch with 2 Interface Slots (JG237A)	HP 5120-24G-PoE+ EI Switch with 2 Interface Slots (JG236A)
Ports
	24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 dual-personality ports autosensing 10/100/1000BASE-T or SFP 1 RJ-45 serial console port	48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 dual-personality ports PoE autosensing 10/100/1000BASE-T or SFP 2 port expansion module slots 1 RJ-45 serial console port Supports a maximum of 48 autosensing 10/100/1000 ports	24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+) Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 dual-personality ports PoE autosensing 10/100/1000BASE-T or SPF 2 port expansion module slots 1 RJ-45 serial console port
Physical characteristics
	17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height)	17.32(w) x 16.54(d) x 1.72(h) in (43.99 x 42.01 x 4.37 cm) (1U height)	17.32(w) x 16.54(d) x 1.72(h) in (43.99 x 42.01 x 4.37 cm) (1U height)
Weight	9.92 lb (4.5 kg)	16.53 lb (7.5 kg)	15.43 lb (7 kg)
Memory and processor
	128 MB SDRAM, 16 MB flash; packet buffer size: 2 MB	128 MB SDRAM, 16 MB flash; packet buffer size: 4 MB	128 MB SDRAM, 16 MB flash; packet buffer size: 2 MB
Mounting
	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency	< 3.2 µs	< 3.2 µs	< 3.2 µs
10 Gbps Latency		< 2.6 µs	< 2.6 µs
Throughput	35.7 million pps	142.9 million pps	107.2 million pps
Routing/Switching capacity	48 Gbps	192 Gbps	144 Gbps
Routing table size	32 entries	32 entries	32 entries
Environment
Operating temperature	32°F to 113°F (0°C to 45°C)	32°F to 113°F (0°C to 45°C)	32°F to 113°F (0°C to 45°C)
Operating relative humidity	10% to 90%, noncondensing	10% to 90%, noncondensing	10% to 90%, noncondensing
Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity	5% to 95%, noncondensing	10% to 90%, noncondensing	5% to 95%, noncondensing
Electrical characteristics
Maximum heat dissipation	212 BTU/hr (223.66 kJ/hr)	614 BTU/hr (647.77 kJ/hr)	425 BTU/hr (448.38 kJ/hr)
Voltage	100-240 VAC	100-240 VAC	100-240 VAC
DC voltage		-52 to -55 VDC	-52 to -55 VDC
Idle power	35 W	78 W	55 W
Maximum power rating	62 W	920 W	495 W
PoE power		740 W	370 W
Frequency	50/60 Hz	50/60 Hz	50/60 Hz
Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS). With AC input, the maximum power consumption is 550 W; PoE is 370 W.	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).
Safety
	UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1AnatelULARGOSTEN 60950-1/A11FDA 21 CFR Subchapter JNOMROHS Compliance	UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1AnatelULARGOSTEN 60950-1/A11FDA 21 CFR Subchapter JNOMROHS Compliance	UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1AnatelULARGOSTEN 60950-1/A11FDA 21 CFR Subchapter JNOMROHS Compliance

» Back to top

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

» Back to top

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager

» Back to top

Standards and protocols

Device management

RFC 1157 SNMPv1/v2c
RFC 1305 NTPv3
RFC 2573 (SNMPv3 Applications)
RFC 2819 (RMON groups Alarm, Event, History and Statistics only)
RFC 3416 (SNMP Protocol Operations v2)
HTML and telnet management
Multiple Configuration Files
SNMP v3 and RMON RFC support
SSHv1/SSHv2 Secure Shell
TACACS/TACACS+
Web UI

General protocols

IEEE 802.1ad Q-in-Q
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.1X PAE
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP
RFC 1213 Management Information Base for Network Management of TCP/IP-based internets
RFC 1305 NTPv3
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1812 IPv4 Routing
RFC 1866 Hypertext Markup Language - 2.0
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2616 HTTP Compatibility v1.1
RFC 2665 Definitions of Managed Objects for the Ethernet-like Interface Types
RFC 2668 Definitions of Managed Objects for IEEE 802.3 Medium Attachment Units (MAUs)
RFC 2865 Remote Authentication Dial In User Service (RADIUS)
RFC 2866 RADIUS Accounting

RFC 3414 User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)
RFC 3415 View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)
RFC 3418 Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
RFC 3576 Ext to RADIUS (CoA only)
RFC 4213 Basic IPv6 Transition Mechanisms
802.1r - GARP Proprietary Attribute Registration Protocol (GPRP)

IPv6

RFC 2461 IPv6 Neighbor Discovery
RFC 2463 ICMPv6
RFC 3162 RADIUS and IPv6
RFC 3306 Unicast-Prefix-based IPv6 Multicast Addresses
RFC 3315 DHCPv6 (client and relay)

MIBs

RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1757 Remote Network Monitoring MIB
RFC 2096 IP Forwarding Table MIB
RFC 2233 Interface MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2574 SNMP USM MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3621 Power Ethernet MIB

Network management

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
SNMPv1/v2c/v3

Security

IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv2 Secure Shell

» Back to top

HP 5500 2-port 10GbE XFP Module (JD359B)

HP 2-port XFP A5500 Module

Ports

2 XFP 10-GbE ports
Duplex: full only

Compatible products

HP 5500 2-port 10GbE Local Connect Module (JD360B)

HP 2-port 10-GbE A5500 Local Connection Module

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 5500 1-port 10GbE XFP Module (JD361B)

HP 1-port XFP A5500 Module

Ports

1 XFP 10-GbE port
Duplex: full only

Compatible products

HP 5500/5120 2-port 10GbE SFP+ Module (JD368B)

HP 5500/A5120 2-port 10GbE SFP+ Module: 2-port SFP+ module for HP 5500 HI, 5500 EI, 5500 SI, 5120 EI, and 5120 HI switches.

Ports

2 SFP+ 10-GbE ports

Compatible products

HP 5500/4800 2-port GbE SFP Module (JD367A)

HP 2-Port SFP A5500/E4800 Module

Ports

2 SFP 1000 Mbps ports

Compatible products

HP X125 1G SFP LC LH40 1310nm Transceiver (JD061A)

A small form-factor pluggable SFP Gigabit LH40 transceiver that provides a full duplex Gigabit solution up to 40km on a single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:

Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

Up to 40km

Fiber type: Single Mode

Compatible products

HP X120 1G SFP LC LH40 1550nm Transceiver (JD062A)

A small form-factor pluggable (SFP) Gigabit LH40 transceiver that provides a full-duplex Gigabit solution up to 40 km on a single mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 85%
Altitude: up to 10,000 ft.

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:

Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

Up to 40km

Fiber type: Single Mode

Compatible products

HP X125 1G SFP LC LH70 Transceiver (JD063B)

A small form-factor pluggable (SFP) Gigabit LH70 transceiver that provides a full-duplex Gigabit solution up to 70km on a single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:

Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

70km

Fiber type: Single Mode

Compatible products

HP X130 10G SFP+ LC SR Transceiver (JD092B)

HP X130 SFP+ LC SR Transceiver

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X130 10G SFP+ LC LRM Transceiver (JD093B)

HP X130 SFP+ LC LRM Transceiver

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X130 10G SFP+ LC LR Transceiver (JD094B)

HP X130 SFP+ LC LR Transceiver

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable (JD095C)

HP X240 SFP+ SFP+ 0.65 m Direct Attach Cable

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable (JD096C)

HP X240 SFP+ SFP+ 1.2 m Direct Attach Cable

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (JD097C)

HP X240 SFP+ SFP+ 3 m Direct Attach Cable

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X130 10G XFP LC LR Transceiver (JD108B)

HP X130 10G XFP LC LR Transceiver

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X130 10G XFP LC SR Transceiver (JD117B)

HP X130 10G XFP LC SR Transceiver

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X120 1G SFP LC SX Transceiver (JD118B)

A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m on a Multimode fiber.

Ports

1 LC 1000BASE-SX port

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Maximum distance:

FDDI Grade distance = 220m
OM1 = 275m
OM2 = 500m
OM3 = Not Specified by standard

Cable length: up to 550m
Fiber type: Multi Mode

Compatible products

HP X120 1G SFP LC LX Transceiver (JD119B)

A small form-factor pluggable (SFP) Gigabig LX transceiver that provides a full duplex Gigabit solution up to 550m on MMF or 10Km on SMF

Ports

1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)

Connectivity

Connector type: LC
Wavelength: 1300 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:

Either single mode or multimode

Maximum distance:

550m for Multimode
10km for Singlemode

Fiber type: Both

Compatible products

HP X135 10G XFP LC ER Transceiver (JD121A)

HP X135 10G XFP LC ER Transceiver

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X110 100M SFP LC FX Dual Mode Transceiver (JD497A)

JD497A

Ports

1 LC 100 Mbps port

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable length: 2km
Fiber type: Multi Mode

Compatible products

HP X110 100M SFP LC LX10 Transceiver (JD498A)

JD498A

Ports

1 LC 100 Mbps port

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable length: 10km
Fiber type: Single Mode

Compatible products

HP X120 1G SFP LC BX 10-U Transceiver (JD098B)

A small form-factor pluggable (SFP) Gigabit LX-BX10-U transceiver that provides a full duplex Gigabit solution up to 10km on a single mode cable.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U)
Duplex: full only

Connectivity

Connector type: LC

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Maximum distance:

10km

Fiber type: Single Mode

Notes

TX 1310nm RX 1490nm

Compatible products

HP X120 1G SFP LC BX 10-D Transceiver (JD099B)

A small form-factor pluggable (SFP) Gigabit LX-BX10-D transceiver that provides a full duplex Gigabit solution up to 10km on a single mode cable.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D)
Duplex: full only

Connectivity

Connector type: LC

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Maximum distance:

Up to 10km

Fiber type: Single Mode

Notes

TX 1490nm RX 1310nm

Compatible products

HP X120 1G SFP RJ45 T Transceiver (JD089B)

A small form factor pluggable (SFP) Gigabit 1000Base-T transceiver that provides a full duplex Gigabit solution up to 100m on a Cat-5+ cable.

Ports

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)

Connectivity

Connector type: RJ-45

Physical characteristics

Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Full configuration weight: 0.07 lb. (0.03 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Maximum distance:

100m

Compatible products

HP X130 10G SFP+ LC ER 40km Transceiver (JG234A)

HP X130 10G SFP+ LC ER 40km Transceiver

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X230 Local Connect 100cm CX4 Cable (JD364B)

HP X230 Local Connect 100 cm CX4 Cable

Connectivity

Length: 3.3 ft. (1.0 m)

Compatible products

HP X230 CX4 to CX4 3m Cable (JD365A)

HP X230 Local Connect CX4 300 cm Cable

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber and designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable (BK837A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH) thermoplastic.
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also has a longitudal white stripe that runs the entire length of the cable.
Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46

Compatible products

HP 1 m PremierFlex OM3+ LC/LC Optical Cable (BK838A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 2 m PremierFlex OM3+ LC/LC Optical Cable (BK839A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 5 m PremierFlex OM3+ LC/LC Optical Cable (BK840A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 15 m PremierFlex OM3+ LC/LC Optical Cable (BK841A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 30 m PremierFlex OM3+ LC/LC Optical Cable (BK842A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 50 m PremierFlex OM3+ LC/LC Optical Cable (BK843A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP X230 Local Connect 50cm CX4 Cable (JD363B)

HP X230 Local Connect 100 cm CX4 Cable

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP RPS 800 Redundant Power Supply (JD183A)

HP RPS800 Redundant Power System

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP RPS1600 Redundant Power System (JG136A)

A-RPS1600 is a cost effective power redundancy solution which can support up to 8 active devices and up to 3200W power per system, 1400W power per port to fixed port switches

Ports

8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)

Physical characteristics

Dimensions: 15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42 cm)
Weight: 14.11 lb. (6.4 kg)
Full configuration weight: 16.75 lb. (7.6 kg)

Environment

Operating temperature: 14°F to 122°F (-10°C to 50°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 5% to 95%
Altitude: up to 13,123 ft. (4 km)
Acoustic: Pressure: 53 dB; ISO 7779, ISO 9296

Electrical characteristics

Voltage: 100-120/200-240 VAC
Current: 30/60 A
Idle power: 38 W
Maximum power rating: 3550 W
RPS power: 3200 W
PoE power: 2800 W
RPS: -55 V
PoE: -55 V
Frequency: 50/60 Hz
Notes: Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
With one RPS1600 Power Supply, the PRS1600 Redundant Power System can provide 1600W power output; With two PRS1600 Power Supplies, the output power is 3200W.

Safety

CE Labeled
UL 60950-1
IEC 60950-1
ICES-003
FCC Part 15, Subpart B
EU RoHS Compliant
EN 60950-1/A11
C-Tick
VCCI Class A
ROHS Compliance
EN 300386

Compatible products

HP RPS1600 1600W AC Power Supply (JG137A)

A 1600W-220V / 800W-110V AC Power Supply for the A-RPS1600 Redundant Power System

Physical characteristics

Dimensions: 8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x 4.15 cm)
Weight: 3.02 lb. (1.37 kg)

Environment

Electrical characteristics

Voltage: 100-120/200-240 VAC
Current: 15/30 A
Maximum power rating: 1600 W
Frequency: 50/60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Compatible products

HP X290 1000 A JD5 2m RPS Cable (JD187A)

JD187A

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X290 500/800 1m RPS Cable (JD190A)

JD190A

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 5120 EI Switch Series

» Modules
» Transceivers

» Cables
» Power Supply

» Power cords

Modules

»HP 5500 2-port 10GbE XFP Module (JD359B)
»HP 5500 2-port 10GbE Local Connect Module (JD360B)
»HP 5500 1-port 10GbE XFP Module (JD361B)
»HP 5500/5120 2-port 10GbE SFP+ Module (JD368B)
»HP 5500/4800 2-port GbE SFP Module (JD367A)

Transceivers

»HP X125 1G SFP LC LH40 1310nm Transceiver (JD061A)
»HP X120 1G SFP LC LH40 1550nm Transceiver (JD062A)
»HP X125 1G SFP LC LH70 Transceiver (JD063B)
»HP X130 10G SFP+ LC SR Transceiver (JD092B)
»HP X130 10G SFP+ LC LRM Transceiver (JD093B)
»HP X130 10G SFP+ LC LR Transceiver (JD094B)
»HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable (JD095C)
»HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable (JD096C)
»HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (JD097C)
»HP X130 10G XFP LC LR Transceiver (JD108B)
»HP X130 10G XFP LC SR Transceiver (JD117B)
»HP X120 1G SFP LC SX Transceiver (JD118B)
»HP X120 1G SFP LC LX Transceiver (JD119B)
»HP X135 10G XFP LC ER Transceiver (JD121A)
»HP X110 100M SFP LC FX Dual Mode Transceiver (JD497A)
»HP X110 100M SFP LC LX10 Transceiver (JD498A)
»HP X120 1G SFP LC BX 10-U Transceiver (JD098B)
»HP X120 1G SFP LC BX 10-D Transceiver (JD099B)
»HP X120 1G SFP RJ45 T Transceiver (JD089B)
»HP X130 10G SFP+ LC ER 40km Transceiver (JG234A)

Cables

»HP X230 Local Connect 100cm CX4 Cable (JD364B)
»HP X230 CX4 to CX4 3m Cable (JD365A)
»HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)
»HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)
»HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)
»HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)
»HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)
»HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)
»HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)
»HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable (BK837A)
»HP 1 m PremierFlex OM3+ LC/LC Optical Cable (BK838A)
»HP 2 m PremierFlex OM3+ LC/LC Optical Cable (BK839A)
»HP 5 m PremierFlex OM3+ LC/LC Optical Cable (BK840A)
»HP 15 m PremierFlex OM3+ LC/LC Optical Cable (BK841A)
»HP 30 m PremierFlex OM3+ LC/LC Optical Cable (BK842A)
»HP 50 m PremierFlex OM3+ LC/LC Optical Cable (BK843A)
»HP X230 Local Connect 50cm CX4 Cable (JD363B)

Power Supply

»HP RPS 800 Redundant Power Supply (JD183A)
»HP RPS1600 Redundant Power System (JG136A)
»HP RPS1600 1600W AC Power Supply (JG137A)

Power cords

»HP X290 1000 A JD5 2m RPS Cable (JD187A)
»HP X290 500/800 1m RPS Cable (JD190A)

» Back to top

HP 5120 EI Switch Series

»HP Care Packs for HP Networking
»Services
»Additional Support and Services

HP Care Packs for HP Networking

HP 5120-48G EI Switch with 2 Interface Slots

3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR586E)
Installation with minimum configuration, system-based pricing (UX116E)
Installation with HP-provided configuration, system-based pricing (UX117E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS688E)

HP 5120-48G EI Switch

3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR586E)
Installation with minimum configuration, system-based pricing (UX116E)
Installation with HP-provided configuration, system-based pricing (UX117E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS688E)

HP 5120-24G EI Switch with 2 Interface Slots

3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR586E)
Installation with minimum configuration, system-based pricing (UX116E)
Installation with HP-provided configuration, system-based pricing (UX117E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS688E)

HP 5120-24G EI Switch

3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR586E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR670E)
Installation with minimum configuration, system-based pricing (UX116E)
Installation with HP-provided configuration, system-based pricing (UX117E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS688E)

HP 5120-48G-PoE+ EI Switch with 2 Interface Slots

3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
Installation with minimum configuration, system-based pricing (UX116E)
Installation with HP-provided configuration, system-based pricing (UX117E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)

HP 5120-24G-PoE+ EI Switch with 2 Interface Slots

3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
Installation with minimum configuration, system-based pricing (UX116E)
Installation with HP-provided configuration, system-based pricing (UX117E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)

» Back to top

HP Networking Services

Services that add value to your business

The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

» Back to top

Additional Support and Services

To get more details about the HP Services available in your country, please visit Networking Services

Please check the availability of these service in your respective countries.

» Back to top

Resources

Business Documentation
Technical Documentation

[+] Show Selections

Loading Collateral...

Couldn't find what you were looking for?

Send us feedback