HP 5500 EI Switch Series

Product overview

These Gigabit Ethernet switches deliver outstanding security, reliability, and multiservice support capabilities for robust switching at the edge or aggregation layer of large enterprise and campus networks, or in the core layer of SMB networks. The HP 5500 EI Switch Series is comprised of Layer 2/3 Gigabit Ethernet switches that can accommodate the most demanding applications and provide resilient and secure connectivity as well as the latest traffic prioritization technologies to enhance applications on convergent networks. With complete IPv4/IPv6 dual-stack support, the series provides a migration path from IPv4 to IPv6 and has hardware support for IPv6. Designed for increased flexibility, these switches are available with 24 or 48 Gigabit Ethernet ports. Power over Ethernet (PoE) and non-PoE models are available with optional GbE and 10GbE expansion capability. The all-fiber model with dual power supplies is ideal for applications that require the highest availability.
  • High expandability for investment protection
  • Premium security and integrated management
  • Multilayer reliability
  • Convergence-ready support
  • Outstanding Quality of Service (QoS)

Software-defined networking

  • OpenFlow — supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths

Quality of Service (QoS)

  • Storm restraint — allows limitation of broadcast, multicast, and unknown unicast traffic rate to cut down on unwanted broadcast traffic on the network
  • Advanced classifier-based QoS — classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies, such as setting priority level and rate limit, to bi-directional selected traffic on a per-port, per-VLAN, or whole switch basis
  • Powerful QoS feature — creates traffic classes based on ACLs, IEEE 802.1p precedence, IP, DSCP, or ToS precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority queuing (SP), weighted round robin (WRR), SP+WRR, weighted fair queuing (WFQ), and weighted random early discard (WRED)
  • Traffic policing — supports Committed Access Rate (CAR) and line rate

Management

  • Friendly port names — allows assignment of descriptive names to ports
  • Remote configuration and management — enables configuration and management through a secure Web browser or a CLI located on a remote device
  • Manager and operator privilege levels — provides read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
  • Command authorization — leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail
  • Secure Web GUI — provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
  • Dual flash images — provides independent primary and secondary operating system files for backup while upgrading
  • Multiple configuration files — stores easily to the flash image
  • Complete session logging — provides detailed information for problem identification and resolution
  • SNMPv1, v2c, and v3 — facilitate centralized discovery, monitoring, and secure management of networking devices
  • Remote monitoring (RMON) — uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
  • sFlow (RFC 3176) — provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
  • Management VLAN — segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and SNMP
  • Remote Intelligent Mirroring — mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
  • Device Link Detection Protocol (DLDP) — monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, preventing network problems such as loops
  • IPv6 management — provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6
  • Troubleshooting — ingress and egress port monitoring enables network problem-solving; virtual cable tests provide visibility into cable problems
  • In-Service Software Upgrade (ISSU) — enables operators to perform upgrades in the shortest possible amount of time with minimal risk to network operations or traffic disruptions

Connectivity

  • Auto-MDIX — automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
  • Flow control — provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
  • Jumbo packet support — supports up to 9216-byte frame size to improve the performance of large data transfers
  • High-density port connectivity — provides up to 48 fixed 10/100/1000BASE-T or 24 SFP 100/1000BASE-X ports in a Layer 2/Layer 3 stackable switch supporting unique IRF stacking
  • IEEE 802.3at Power over Ethernet (PoE+) support — simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
  • Ethernet operations, administration and maintenance (OAM) — detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the link between two devices
  • High-bandwidth CX4 and SFP+ local stacking — provide 10 Gb/s SPF+ or 12 Gb/s CX4 local stacking cables; achieve a resilient stacking configuration
  • Optional 10GbE ports — deliver, through the use of optional modules, additional 10GbE connections, which are available for uplinks or high-bandwidth server connections; flexibly support copper, XFP, SFP+, or CX4 local connections

Performance

  • Nonblocking architecture — up to 192 Gb/s nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput
  • Hardware-based wirespeed access control lists (ACLs) — help provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation

Resiliency and high availability

  • Separate data and control paths — separates control from services and keeps service processing isolated; increases security and performance
  • External redundant power supply — provides high reliability
  • Smart link — allows 50 ms failover between links
  • Spanning Tree/MSTP, RSTP — provides redundant links while preventing network loops
  • Rapid Ring Protection Protocol (RRPP) — connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications
  • Virtual Router Redundancy Protocol (VRRP) — allows a group of routers to dynamically back each other up to create highly available routed environments
  • Intelligent Resilient Framework (IRF) — creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router; switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation
  • IP Fast Reroute (FRR) — forms backup paths and allows 50 ms switchover in case of a main path fault
  • IRF capability — provides single IP address management for a resilient virtual switching fabric of up to nine switches

Layer 2 switching

  • 32K MAC addresses — provide access to many Layer 2 devices
  • IEEE 802.1ad QinQ and selective QinQ — increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network
  • GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
  • IEEE 802.1ad QinQ — increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed campus or metro network
  • 10GbE port aggregation — allows grouping of ports to increase overall data throughput to a remote device
  • Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping — controls and manages the flooding of multicast packets in a Layer 2 network

Layer 3 services

  • Address Resolution Protocol (ARP) — determines the MAC address of another IP host in the same subnet
  • Dynamic Host Configuration Protocol (DHCP) — simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets
  • Loopback interface address — defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
  • User Datagram Protocol (UDP) helper function — allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
  • Route maps — provide more control during route redistribution; allow filtering and altering of route metrics

Layer 3 routing

  • IPv4 routing protocols — support static routes, RIP, OSPF, ISIS, and BGP
  • IPv6 routing protocols — provide routing of IPv6 at wire speed; support static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+ for IPv6
  • Equal-Cost Multipath (ECMP) — enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
  • Policy-based routing — makes routing decisions based on policies set by the network administrator
  • IGMPv1, v2, and v3 — allow individual hosts to be registered on a particular VLAN
  • PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6) — support IP Multicast address management and inhibition of DoS attacks
  • IPv6 tunneling — allows a smooth transition from IPv4 to IPv6 by encapsulating IPv6 traffic over an existing IPv4 infrastructure
  • Unicast Reverse Path Forwarding (uRPF) — limits erroneous or malicious traffic in accordance with RFC 3074
  • Bidirectional Forwarding Detection (BFD) — enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, and IRF

Security

  • Access control lists (ACLs) — provide IP Layer 2 to Layer 4 traffic filtering; support global ACL, VLAN ACL, port ACL, and IPv6 ACL. Up to 3072 ingress ACLs and 448 egress ACLs are supported
  • IEEE 802.1X — is an industry-standard method of user authentication that uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
  • MAC-based authentication — authenticates the client with the RADIUS server based on the client's MAC address
  • Identity-driven security and access control
    • Per-user ACLs — permit or deny user access to specific network resources based on user identity and time of day, allowing multiple types of users on the same network to access specific network services without risking network security or providing unauthorized access to sensitive data
    • Automatic VLAN assignment — automatically assigns users to the appropriate VLAN based on their identities
  • Secure management access — delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
  • Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
  • Guest VLAN — provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
  • Endpoint Admission Defense (EAD) — provides security policies to users accessing a network
  • Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
  • Port isolation — secures and adds privacy, and prevents malicious attackers from obtaining user information
  • STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
  • STP root guard — protects the root bridge from malicious attacks or configuration mistakes
  • DHCP protection — blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
  • Dynamic ARP protection — blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
  • IP source guard — helps prevent IP spoofing attacks
  • RADIUS/HWTACACS — eases switch management security administration by using a password authentication server
  • Multiple Customer Edge (MCE) — facilitates MPLS VPN network integration with up to 64 VPNs support
  • Unicast Reverse Path Forwarding (URPF) — allows normal packets to be forwarded correctly, whereas the attaching packet will be discarded due to lack of reverse path route or incorrect inbound interface; prevents source spoofing and distributed attacks; supports distributed URPF

Convergence

  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — facilitates easy mapping using network management applications with LLDP automated device discovery protocol
  • LLDP-MED — is a standard extension that automatically configures network devices, including LLDP-capable IP phones
  • LLDP-CDP compatibility — receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
  • IEEE 802.3af Power over Ethernet — provides up to 15.4 W per port to PoE-powered devices such as IP phones, wireless access points, and video cameras
  • PoE allocations — supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more efficient energy savings
  • Voice VLAN — automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
  • IP multicast snooping (data-driven IGMP) — prevents flooding of IP multicast traffic
  • Internet Group Management Protocol (IGMP) — utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks; supports IGMPv1, v2, and v3
  • Protocol Independent Multicast (PIM) — defines modes of Internet multicasting to allow one-to-many and many-to-many transmission of information; supports PIM Dense Mode (DM), Sparse Mode (SM), and Source-Specific Mode (SSM)
  • Multicast Source Discovery Protocol (MSDP) — allows multiple PIM-SM domains to interoperate; is used for inter-domain multicast applications
  • Multicast Border Gateway Protocol (MBGP) — allows multicast traffic to be forwarded across BGP networks and kept separate from unicast traffic
  • Multicast VLAN — allows multiple VLANs to receive the same IPv4 or IPv6 multicast traffic, lessening network bandwidth demand by reducing or eliminating multiple streams to each VLAN

Device support

  • Cisco prestandard PoE support — detects and provides power to Cisco's prestandard PoE devices such as wireless LAN access points and IP phones

Additional information

  • Green IT and power — improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs
  • Green initiative support — provides support for RoHS and WEEE regulations

Warranty and support

  • Lifetime Warranty 2.0 — advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†
  • Electronic and telephone support (for Lifetime Warranty 2.0) — limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone support is available from HP for the entire warranty period; to reach our support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary
  • Software releases — to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary
HP 5500-24G EI Switch with 2 Interface Slots (JD377A) HP 5500-48G EI Switch with 2 Interface Slots (JD375A) HP 5500-24G-SFP EI Switch with 2 Interface Slots (JD374A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

4 dual-personality ports

autosensing 10/100/1000BASE-T or SFP

1 RJ-45 serial console port

2 port expansion module slots

Supports a maximum of 24 autosensing 10/100/1000 ports

48 RJ-45 autosensing 10/100/1000 ports

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

4 dual-personality ports

autosensing 10/100/1000BASE-T or SFP

1 RJ-45 serial console port

2 port expansion module slots

Supports a maximum of 48 autosensing 10/100/1000 ports

24 fixed Gigabit Ethernet SFP ports

8 dual-personality ports

autosensing 10/100/1000BASE-T or SFP

1 RJ-45 serial console port

2 port expansion module slots

Physical characteristics
Dimensions 17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height) 17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height) 17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)
Weight 8.82 lb (4 kg) 9.92 lb (4.5 kg) 13.89 lb (6.3 kg)
Memory and processor
256 MB SDRAM, 32 MB flash; packet buffer size: 2 MB 256 MB SDRAM, 32 MB flash; packet buffer size: 4 MB 256 MB SDRAM, 32 MB flash; packet buffer size: 2 MB
Mounting and enclosure
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included) Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included) Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency < 3.2 µs < 3.2 µs < 3.2 µs
10 Gb/s Latency < 2.6 µs < 2.6 µs < 2.6 µs
Throughput 107.2 million pps 142.9 million pps 107.2 million pps
Routing/Switching capacity 144 Gb/s 192 Gb/s 144 Gb/s
Routing table size 12000 entries (IPv4) 12000 entries (IPv4) 12000 entries (IPv4)
Environment
Operating temperature 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C)
Operating relative humidity 10% to 90%, noncondensing 10% to 90%, noncondensing 10% to 90%, noncondensing
Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity 5% to 95%, noncondensing 5% to 95%, noncondensing 5% to 95%, noncondensing
Acoustic ISO 7779 ISO 7779 ISO 7779
Electrical characteristics
Frequency 50/60 Hz 50/60 Hz 50/60 Hz
Maximum heat dissipation 375 BTU/hr (395.63 kJ/hr) 392 BTU/hr (413.56 kJ/hr) 392 BTU/hr (413.56 kJ/hr)
AC voltage 100 - 240 VAC 100 - 240 VAC 100 - 240 VAC
Maximum power rating 110 W 115 W 115 W
Safety
UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1EN 60950-1/A11FDA 21 CFR Subchapter JROHS Compliance UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1EN 60950-1/A11FDA 21 CFR Subchapter JROHS Compliance UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1EN 60950-1/A11FDA 21 CFR Subchapter JROHS Compliance
Notes
1 power supply included
HP 5500-48G-PoE+ EI Switch with 2 Interface Slots (JG240A) HP 5500-24G-PoE+ EI Switch with 2 Interface Slots (JG241A)
I/O ports and slots
48 RJ-45 autosensing 10/100/1000 PoE+ ports

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)

4 dual-personality ports

autosensing 10/100/1000BASE-T or SFP

1 RJ-45 serial console port

2 port expansion module slots

Supports a maximum of 48 autosensing 10/100/1000 ports

24 RJ-45 autosensing 10/100/1000 PoE+ ports

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)

4 dual-personality ports

autosensing 10/100/1000BASE-T or SFP

1 RJ-45 serial console port

2 port expansion module slots

Supports a maximum of 24 autosensing 10/100/1000 ports

Physical characteristics
Dimensions 17.32(w) x 16.54(d) x 1.72(h) in (43.99 x 42.01 x 4.37 cm) (1U height) 17.32(w) x 16.54(d) x 1.69(h) in (43.99 x 42.01 x 4.29 cm) (1U height)
Weight 14.33 lb (6.5 kg) 13.23 lb (6 kg)
Memory and processor
256 MB SDRAM, 32 MB flash; packet buffer size: 4 MB 256 MB SDRAM, 32 MB flash; packet buffer size: 2 MB
Mounting and enclosure
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included) Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency < 3.2 µs < 3.2 µs
10 Gb/s Latency < 2.6 µs < 2.6 µs
Throughput 142.9 million pps 107.2 million pps
Routing/Switching capacity 192 Gb/s 144 Gb/s
Routing table size 12000 entries (IPv4) 12000 entries (IPv4)
Environment
Operating temperature 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C)
Operating relative humidity 10% to 90%, noncondensing 10% to 90%, noncondensing
Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity 5% to 95%, noncondensing 5% to 95%, noncondensing
Acoustic ISO 7779 ISO 7779
Electrical characteristics
Frequency 50/60 Hz 50/60 Hz
Maximum heat dissipation 921 BTU/hr (971.66 kJ/hr) 700 BTU/hr (738.5 kJ/hr)
AC voltage 100 - 240 VAC 100 - 240 VAC
Maximum power rating 910 W 575 W
PoE power 740 W 370 W
Safety
UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1EN 60950-1/A11FDA 21 CFR Subchapter JROHS Compliance UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1EN 60950-1/A11FDA 21 CFR Subchapter JROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB

Standards and protocols

BGP
  • RFC 1657 Definitions of Managed Objects for BGPv4
  • RFC 1771 BGPv4
  • RFC 2858 BGP-4 Multi-Protocol Extensions
Device management
  • RFC 1157 SNMPv1/v2c
  • RFC 1305 NTPv3
  • RFC 1901 (Community based SNMPv2)
  • RFC 2452 MIB for TCP6
  • RFC 2454 MIB for UDP6
  • RFC 2573 (SNMPv3 Applications)
  • RFC 2576 (Coexistence between SNMP V1, V2, V3)
  • RFC 2819 RMON
  • RFC 3410 (Management Framework)
  • RFC 3416 (SNMP Protocol Operations v2)
  • RFC 3417 (SNMP Transport Mappings)
  • HTML and telnet management
  • Multiple Configuration Files
  • SNMP v3 and RMON RFC support
  • SSHv1/SSHv2 Secure Shell
General protocols
  • IEEE 802.1ad Q-in-Q
  • IEEE 802.1ak Multiple Registration Protocol (MRP) and Multiple VLAN Registration Protocol (MVRP)
  • IEEE 802.1D MAC Bridges
  • IEEE 802.1p Priority
  • IEEE 802.1Q (GVRP)
  • IEEE 802.1v VLAN classification by Protocol and Port
  • IEEE 802.1w Rapid Reconfiguration of Spanning Tree
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3ac (VLAN Tagging Extension)
  • IEEE 802.3ad Link Aggregation (LAG)
  • IEEE 802.3ae 10-Gigabit Ethernet
  • IEEE 802.3af Power over Ethernet
  • IEEE 802.3at PoE+
  • IEEE 802.3i 10BASE-T
  • IEEE 802.3u 100BASE-X
  • IEEE 802.3x Flow Control
  • IEEE 802.3z 1000BASE-X
  • RFC 768 UDP
  • RFC 791 IP
  • RFC 792 ICMP
  • RFC 793 TCP
  • RFC 854 TELNET
  • RFC 925 Multi-LAN Address Resolution
  • RFC 950 Internet Standard Subnetting Procedure
  • RFC 951 BOOTP
  • RFC 1027 Proxy ARP
  • RFC 1058 RIPv1
  • RFC 1122 Host Requirements
  • RFC 1141 Incremental updating of the Internet checksum
  • RFC 1213 Management Information Base for Network Management of TCP/IP-based internets
  • RFC 1256 ICMP Router Discovery Protocol (IRDP)
  • RFC 1305 NTPv3
  • RFC 1350 TFTP Protocol (revision 2)
  • RFC 1519 CIDR
  • RFC 1542 BOOTP Extensions
  • RFC 1723 RIP v2
  • RFC 1812 IPv4 Routing
  • RFC 1887 An Architecture for IPv6 Unicast Address Allocation
  • RFC 2131 DHCP
  • RFC 2236 IGMP Snooping
  • RFC 2338 VRRP
  • RFC 2375 IPv6 Multicast Address Assignments
  • RFC 2616 HTTP Compatibility v1.1
  • RFC 2644 Directed Broadcast Control
  • RFC 2711 IPv6 Router Alert Option
  • RFC 2865 Remote Authentication Dial In User Service (RADIUS)
  • RFC 2866 RADIUS Accounting
  • RFC 3246 Expedited Forwarding PHB
  • RFC 3410 Applicability Statements for SNMP
  • RFC 3414 User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)
  • RFC 3415 View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)
  • RFC 3417 Transport Mappings for the Simple Network Management Protocol (SNMP)
  • RFC 3484 Default Address Selection for Internet Protocol version 6 (IPv6)
  • RFC 3493 Basic Socket Interface Extensions for IPv6
  • RFC 3542 Advanced Sockets Application Program Interface (API) for IPv6
  • RFC 3587 IPv6 Global Unicast Address Format
  • RFC 3596 DNS Extensions to Support IP Version 6
  • RFC 3623 Graceful OSPF Restart
  • RFC 3704 Unicast Reverse Path Forwarding (URPF)
  • RFC 3768 VRRP
  • RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6
  • RFC 4113 Management Information Base for the User Datagram Protocol (UDP)
  • RFC 4213 Basic IPv6 Transition Mechanisms
  • RFC 4443 Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification
  • RFC 4594 Configuration Guidelines for DiffServ Service Classes
  • 802.1r - GARP Proprietary Attribute Registration Protocol (GPRP)
IP multicast
  • RFC 2236 IGMPv2
  • RFC 2710 Multicast Listener Discovery (MLD) for IPv6
  • RFC 2858 Multiprotocol Extensions for BGP-4
  • RFC 3376 IGMPv3
  • RFC 3569 An Overview of Source-Specific Multicast (SSM)
  • RFC 3618 Multicast Source Discovery Protocol (MSDP)
  • RFC 3973 PIM Dense Mode
  • RFC 4601 PIM Sparse Mode
IPv6
  • RFC 1881 IPv6 Address Allocation Management
  • RFC 1887 IPv6 Unicast Address Allocation Architecture
  • RFC 1981 IPv6 Path MTU Discovery
  • RFC 2080 RIPng for IPv6
  • RFC 2373 IPv6 Addressing Architecture
  • RFC 2375 IPv6 Multicast Address Assignments
  • RFC 2460 IPv6 Specification
  • RFC 2461 IPv6 Neighbor Discovery
  • RFC 2462 IPv6 Stateless Address Auto-configuration
  • RFC 2463 ICMPv6
  • RFC 2464 Transmission of IPv6 over Ethernet Networks
  • RFC 2475 IPv6 DiffServ Architecture
  • RFC 2710 Multicast Listener Discovery (MLD) for IPv6
  • RFC 2711 IPv6 Router Alert Option
  • RFC 2740 OSPFv3 for IPv6
  • RFC 2893 Transition Mechanisms for IPv6 Hosts and Routers
  • RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations (Ping only)
  • RFC 2925 Remote Operations MIB (Ping only)
  • RFC 3056 Connection of IPv6 Domains via IPv4 Clouds
  • RFC 3162 RADIUS and IPv6
  • RFC 3306 Unicast-Prefix-based IPv6 Multicast Addresses
  • RFC 3307 IPv6 Multicast Address Allocation
  • RFC 3315 DHCPv6 (client and relay)
  • RFC 3484 Default Address Selection for IPv6
  • RFC 3493 Basic Socket Interface Extensions for IPv6
  • RFC 3513 IPv6 Addressing Architecture
  • RFC 3542 Advanced Sockets API for IPv6
  • RFC 3587 IPv6 Global Unicast Address Format
  • RFC 3596 DNS Extension for IPv6
  • RFC 3810 MLDv2 for IPv6
  • RFC 4113 MIB for UDP
  • RFC 4443 ICMPv6
  • RFC 5340 OSPFv3 for IPv6
MIBs
  • RFC 1212 Concise MIB Definitions
  • RFC 1213 MIB II
  • RFC 1493 Bridge MIB
  • RFC 1657 BGP-4 MIB
  • RFC 1724 RIPv2 MIB
  • RFC 1757 Remote Network Monitoring MIB
  • RFC 1850 OSPFv2 MIB
  • RFC 2012 SNMPv2 MIB for TCP
  • RFC 2013 SNMPv2 MIB for UDP
  • RFC 2233 Interface MIB
  • RFC 2452 IPV6-TCP-MIB
  • RFC 2454 IPV6-UDP-MIB
  • RFC 2465 IPv6 MIB
  • RFC 2466 ICMPv6 MIB
  • RFC 2571 SNMP Framework MIB
  • RFC 2572 SNMP-MPD MIB
  • RFC 2573 SNMP-Target MIB
  • RFC 2574 SNMP USM MIB
  • RFC 2618 RADIUS Authentication Client MIB
  • RFC 2620 RADIUS Accounting Client MIB
  • RFC 2665 Ethernet-Like-MIB
  • RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and Virtual Extensions
  • RFC 2737 Entity MIB (Version 2)
  • RFC 2787 VRRP MIB
  • RFC 2819 RMON MIB
  • RFC 2925 Ping MIB
  • RFC 3414 SNMP-User based-SM MIB
  • RFC 3415 SNMP-View based-ACM MIB
  • RFC 4113 UDP MIB
Network management
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  • IEEE 802.1D (STP)
  • RFC 1157 SNMPv1
  • RFC 1212 Concise MIB definitions
  • RFC 1215 SNMP Generic traps
  • RFC 1757 RMON 4 groups: Stats, History, Alarms and Events
  • RFC 1901 SNMPv2 Introduction
  • RFC 1918 Private Internet Address Allocation
  • RFC 2373 Remote Network Monitoring Management Information Base for High Capacity Networks
  • RFC 2571 An Architecture for Describing SNMP Management Frameworks
  • RFC 2572 Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)
  • RFC 2573 SNMP Applications
  • RFC 2574 SNMPv3 User-based Security Model (USM)
  • RFC 2575 SNMPv3 View-based Access Control Model (VACM)
  • RFC 2576 Coexistence between SNMP versions
  • RFC 2578 SMIv2
  • RFC 2581 TCP6
  • RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
  • RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations
  • RFC 3176 sFlow
  • RFC 3410 Introduction to Version 3 of the Internet-standard Network Management Framework
  • RFC 3414 SNMPv3 User-based Security Model (USM)
  • RFC 3415 SNMPv3 View-based Access Control Model VACM)
  • ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
  • SNMPv1/v2c/v3
OSPF
  • RFC 1587 OSPF NSSA
  • RFC 1850 OSPFv2 Management Information Base (MIB), traps
  • RFC 2328 OSPFv2
  • RFC 2370 OSPF Opaque LSA Option
  • RFC 3623 Graceful OSPF Restart
QoS/CoS
  • IEEE 802.1P (CoS)
  • RFC 2474 DSCP DiffServ
  • RFC 2475 DiffServ Architecture
  • RFC 2597 DiffServ Assured Forwarding (AF)
  • RFC 2598 DiffServ Expedited Forwarding (EF)
  • RFC 4594 Configuration Guidelines for DiffServ Service Classes
Security
  • IEEE 802.1X Port Based Network Access Control
  • RFC 1492 TACACS+
  • RFC 1918 Address Allocation for Private Internets
  • RFC 2865 RADIUS Authentication
  • RFC 2866 RADIUS Accounting
  • Access Control Lists (ACLs)
  • MAC Authentication
  • Port Security
  • SSHv2 Secure Shell

HP 5500 2-port 10GbE XFP Module (JD359B)

HP 2-port XFP A5500 Module

Ports

2 XFP 10-GbE ports
Duplex: full only

Compatible products

HP 5500 2-port 10GbE Local Connect Module (JD360B)

HP 2-port 10-GbE A5500 Local Connection Module


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 5500 1-port 10GbE XFP Module (JD361B)

HP 1-port XFP A5500 Module

Ports

1 XFP 10-GbE port
Duplex: full only

Compatible products

HP 5500/4800 2-port GbE SFP Module (JD367A)

HP 2-Port SFP A5500/E4800 Module

Ports

2 SFP 1000 Mbps ports

Compatible products

HP 5500/5120 2-port 10GbE SFP+ Module (JD368B)

HP 5500/A5120 2-port 10GbE SFP+ Module: 2-port SFP+ module for HP 5500 HI, 5500 EI, 5500 SI, 5120 EI, and 5120 HI switches.

Ports

2 SFP+ 10-GbE ports

Compatible products

HP 5500/5120 2-port 10GBASE-T Module (JG535A)

HP 5500/5120 2-port 10GBASE-T Module: 2-port 10GBASE-T module for HP 5120 EI, 5500SI/EI/HI switches. Provides 2 Dual Speed 1000BASE-T or 10GBASE-T Copper RJ-45 Ports. Supports EEE 802.3az. Can be used for low cost stacking.

Ports

2 RJ-45 1/10GbE ports

Compatible products

HP X125 1G SFP LC LH40 1310nm Transceiver (JD061A)

A small form-factor pluggable SFP Gigabit LH40 transceiver that provides a full duplex Gigabit solution up to 40km on a single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • Up to 40km

Fiber type: Single Mode

Compatible products

HP X120 1G SFP LC LH40 1550nm Transceiver (JD062A)

A small form-factor pluggable (SFP) Gigabit LH40 transceiver that provides a full-duplex Gigabit solution up to 40 km on a single mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 85%
Altitude: up to 10,000 ft.

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • Up to 40km

Fiber type: Single Mode

Compatible products

HP X125 1G SFP LC LH70 Transceiver (JD063B)

A small form-factor pluggable (SFP) Gigabit LH70 transceiver that provides a full-duplex Gigabit solution up to 70km on a single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 85%
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 70km

Fiber type: Single Mode

Compatible products

HP X130 10G SFP+ LC SR Transceiver (JD092B)

10GbE SFP+ Transceiver, LC connector, SR fiber. For use in selected HP products.

I/O ports and slots

1 SFP+ 10GbE port (IEEE 802.3ae Type 10GBASE-SR)

Connectivity

Connector type: LC
Wavelength: 850 nm

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 300m (OM3)
  • 82m (OM2)
  • 33m (OM1)
  • 26m (FDDI Grade)

Fiber type: Multi Mode

Compatible products

HP X120 1G SFP LC BX 10-U Transceiver (JD098B)

A small form-factor pluggable (SFP) Gigabit LX-BX10-U transceiver that provides a full duplex Gigabit solution up to 10km on a single mode cable.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U)
Duplex: full only

Connectivity

Connector type: LC

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Maximum distance:
  • 10km

Fiber type: Single Mode

Notes

TX 1310nm RX 1490nm

Compatible products

HP X120 1G SFP LC BX 10-D Transceiver (JD099B)

A small form-factor pluggable (SFP) Gigabit LX-BX10-D transceiver that provides a full duplex Gigabit solution up to 10km on a single mode cable.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D)
Duplex: full only

Connectivity

Connector type: LC

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Maximum distance:
  • Up to 10km

Fiber type: Single Mode

Notes

TX 1490nm RX 1310nm

Compatible products

HP X120 1G SFP LC SX Transceiver (JD118B)

A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m on a Multimode fiber.

Ports

1 LC 1000BASE-SX port

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Maximum distance:
  • FDDI Grade distance = 220m
  • OM1 = 275m
  • OM2 = 500m
  • OM3 = Not Specified by standard

Cable length: up to 550m
Fiber type: Multi Mode

Compatible products

HP X120 1G SFP LC LX Transceiver (JD119B)

A small form-factor pluggable (SFP) Gigabig LX transceiver that provides a full duplex Gigabit solution up to 550m on MMF or 10Km on SMF

Ports

1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)

Connectivity

Connector type: LC
Wavelength: 1300 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • Either single mode or multimode

Maximum distance:

  • 550m for Multimode
  • 10km for Singlemode

Fiber type: Both

Compatible products

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable (JD095C)

HP X240 SFP+ SFP+ 0.65 m Direct Attach Cable


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable (JD096C)

HP X240 SFP+ SFP+ 1.2 m Direct Attach Cable


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable (JG081C)

HP X240 SFP+ SFP+ 5 m Direct Attach Copper Cable


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable (JC784C)

10G SFP+ SFP+ 7m Direct Attach Copper Cable


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X120 1G SFP RJ45 T Transceiver (JD089B)

A small form factor pluggable (SFP) Gigabit 1000Base-T transceiver that provides a full duplex Gigabit solution up to 100m on a Cat-5+ cable.

I/O ports and slots

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)

Connectivity

Connector type: RJ-45

Physical characteristics

Dimensions: 0.54(w) x 2.71(d) x 0.55(h) in (1.37 x 6.88 x 1.4 cm)
Full configuration weight: 0.07 lb (0.03 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • 1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Maximum distance:

  • 100m

Compatible products

HP X130 10G SFP+ LC ER 40km Transceiver (JG234A)

HP X130 10G SFP+ LC ER 40km Transceiver


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X230 Local Connect 100cm CX4 Cable (JD364B)

HP X230 Local Connect 100 cm CX4 Cable

Connectivity

Length: 3.3 ft. (1.0 m)

Compatible products

HP X230 CX4 to CX4 3m Cable (JD365A)

HP X230 Local Connect CX4 300 cm Cable


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber and designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A)

1m (3.3ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.202 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 1m (3.3 ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable (QK733A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable (QK733A)

2m (6.6ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.205 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 2m (6.6 ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A)

5m (16.4ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.212 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 5m (16.4 ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable (QK735A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable (QK735A)

15m (49.2ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.235 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 15m (49.2ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A)

30m (98.4ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.269 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 30m (98.4ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable (QK737A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable (QK737A)

50m (164.0ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.315 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 50m (164.0ft)

Compatible products

HP X230 Local Connect 50cm CX4 Cable (JD363B)

HP X230 Local Connect 100 cm CX4 Cable


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 5800/5500 150W AC Power Supply (JD362A)

HP 5800/5500 150W AC Power Supply


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 5800/5500 150W DC Power Supply (JD366A)

HP 5800/5500 150W DC Power Supply


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP RPS 800 Redundant Power Supply (JD183A)

Redundant power system for selected HP networking devices; provides -54 VDC and/or +12 VDC to one device

Physical characteristics

17.36(w) x 7.17(d) x 1.73(h) in (44.1 x 18.2 x 4.4 cm)
Weight: 8.38 lb (3.8 kg)

Compatible products

HP RPS1600 Redundant Power System (JG136A)

A-RPS1600 is a cost effective power redundancy solution which can support up to 8 active devices and up to 3200W power per system, 1400W power per port to fixed port switches

Ports

8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)

Physical characteristics

Dimensions: 15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42 cm)
Weight: 14.11 lb. (6.4 kg)
Full configuration weight: 16.75 lb. (7.6 kg)

Environment

Operating temperature: 14°F to 122°F (-10°C to 50°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 5% to 95%
Altitude: up to 13,123 ft. (4 km)
Acoustic: Pressure: 53 dB; ISO 7779, ISO 9296

Electrical characteristics

Voltage: 100-120/200-240 VAC
Current: 30/60 A
Idle power: 38 W
Maximum power rating: 3550 W
RPS power: 3200 W
PoE power: 2800 W
RPS: -55 V
PoE: -55 V
Frequency: 50/60 Hz
Notes: Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
With one RPS1600 Power Supply, the PRS1600 Redundant Power System can provide 1600W power output; With two PRS1600 Power Supplies, the output power is 3200W.

Safety

CE Labeled
UL 60950-1
IEC 60950-1
ICES-003
FCC Part 15, Subpart B
EU RoHS Compliant
EN 60950-1/A11
C-Tick
VCCI Class A
ROHS Compliance
EN 300386

Compatible products

HP RPS1600 1600W AC Power Supply (JG137A)

A 1600W-220V / 800W-110V AC Power Supply for the A-RPS1600 Redundant Power System

Physical characteristics

Dimensions: 8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x 4.15 cm)
Weight: 3.02 lb. (1.37 kg)

Environment

Operating temperature: 14°F to 122°F (-10°C to 50°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 5% to 95%

Electrical characteristics

Voltage: 100-120/200-240 VAC
Current: 15/30 A
Maximum power rating: 1600 W
Frequency: 50/60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Compatible products

HP X290 1000 A JD5 2m RPS Cable (JD187A)

JD187A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X290 1000 A JD5 Non-PoE 2m RPS Cable (JD188A)

JD188A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X290 1000 B JD5 2m RPS Cable (JD189A)

JD189A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X290 500/800 1m RPS Cable (JD190A)

JD190A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X290 500 U 1m RPS Cable (JD185A)

JD185A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP Care Packs for HP Networking

HP 5500-24G EI Switch with 2 Interface Slots
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4G07E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4G07E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U4G18E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV876E)
  • Installation with minimum configuration, system-based pricing (UW451E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (U4G13E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (U4G16E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (U4G22E)
  • 4-year, 24x7 SW phone support, software updates (U4G20E)
  • 5-year, 24x7 SW phone support, software updates (U4G21E)
  • 3 Yr 6 hr Call-to-Repair Onsite (U4G08E)
  • 4 Yr 6 hr Call-to-Repair Onsite (U4G17E)
  • 5 Yr 6 hr Call-to-Repair Onsite (U4G11E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G26E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4G29E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G27E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4G30E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G28E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4G31E)
  • 3 Yr NBD Onsite Proactive Care (U4G34E)
  • 5 Yr NBD Onsite Proactive Care (U4G36E)
  • 3 Yr 4hr/24x7 Proactive Care (U4G37E)
  • 5 Yr 4hr/24x7 Proactive Care (U4G39E)
  • 3 Yr 6hr CTR Proactive Care (U4G40E)
  • 5 Yr 6hrCTR Proactive Care (U4G42E)
HP 5500-48G EI Switch with 2 Interface Slots
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4G80E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4G81E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U4G92E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (U4G86E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (U4G88E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (U4H07E)
  • Installation with minimum configuration, system-based pricing (UW451E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (U4G87E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (U4G90E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (U4G96E)
  • 4-year, 24x7 SW phone support, software updates (U4G94E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (U4G84E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (U4G97E)
  • 5-year, 24x7 SW phone support, software updates (U4G95E)
  • 3 Yr 6 hr Call-to-Repair Onsite (U4G82E)
  • 4 Yr 6 hr Call-to-Repair Onsite (U4G91E)
  • 5 Yr 6 hr Call-to-Repair Onsite (U4G85E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (U4G89E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G98E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G99E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4H00E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4H03E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4H04E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4H02E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4H05E)
  • 3 Yr NBD Onsite Proactive Care (U4H08E)
  • 5 Yr NBD Onsite Proactive Care (U4H10E)
  • 3 Yr 4hr/24x7 Proactive Care (U4H11E)
  • 5 Yr 4hr/24x7 Proactive Care (U4H13E)
  • 3 Yr 6hr CTR Proactive Care (U4H14E)
  • 5 Yr 6hrCTR Proactive Care (U4H16E)
HP 5500-24G-SFP EI Switch with 2 Interface Slots
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4G07E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4G07E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U4G18E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV876E)
  • Installation with minimum configuration, system-based pricing (UW451E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (U4G13E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (U4G16E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (U4G22E)
  • 4-year, 24x7 SW phone support, software updates (U4G20E)
  • 5-year, 24x7 SW phone support, software updates (U4G21E)
  • 3 Yr 6 hr Call-to-Repair Onsite (U4G08E)
  • 4 Yr 6 hr Call-to-Repair Onsite (U4G17E)
  • 5 Yr 6 hr Call-to-Repair Onsite (U4G11E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G26E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4G29E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G27E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4G30E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G28E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4G31E)
  • 3 Yr NBD Onsite Proactive Care (U4G34E)
  • 5 Yr NBD Onsite Proactive Care (U4G36E)
  • 3 Yr 4hr/24x7 Proactive Care (U4G37E)
  • 5 Yr 4hr/24x7 Proactive Care (U4G39E)
  • 3 Yr 6hr CTR Proactive Care (U4G40E)
  • 5 Yr 6hrCTR Proactive Care (U4G42E)
HP 5500-48G-PoE+ EI Switch with 2 Interface Slots
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U4G80E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4G81E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U4G92E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (U4G86E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (U4G88E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (U4H07E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (U4G87E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (U4G90E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (U4G96E)
  • 4-year, 24x7 SW phone support, software updates (U4G94E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (U4G84E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (U4G97E)
  • 5-year, 24x7 SW phone support, software updates (U4G95E)
  • 3 Yr 6 hr Call-to-Repair Onsite (U4G82E)
  • 4 Yr 6 hr Call-to-Repair Onsite (U4G91E)
  • 5 Yr 6 hr Call-to-Repair Onsite (U4G85E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (U4G89E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G98E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G99E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4H00E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4H03E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4H04E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4H02E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4H05E)
  • 3 Yr NBD Onsite Proactive Care (U4H08E)
  • 5 Yr NBD Onsite Proactive Care (U4H10E)
  • 3 Yr 4hr/24x7 Proactive Care (U4H11E)
  • 5 Yr 4hr/24x7 Proactive Care (U4H13E)
  • 3 Yr 6hr CTR Proactive Care (U4H14E)
  • 5 Yr 6hrCTR Proactive Care (U4H16E)
HP 5500-24G-PoE+ EI Switch with 2 Interface Slots
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4G07E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U4G07E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV876E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U4G18E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (U4G13E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (U4G16E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (U4G22E)
  • 4-year, 24x7 SW phone support, software updates (U4G20E)
  • 5-year, 24x7 SW phone support, software updates (U4G21E)
  • 3 Yr 6 hr Call-to-Repair Onsite (U4G08E)
  • 4 Yr 6 hr Call-to-Repair Onsite (U4G17E)
  • 5 Yr 6 hr Call-to-Repair Onsite (U4G11E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G26E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4G29E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G27E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4G28E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U4G31E)
  • 3 Yr NBD Onsite Proactive Care (U4G34E)
  • 5 Yr NBD Onsite Proactive Care (U4G36E)
  • 3 Yr 4hr/24x7 Proactive Care (U4G37E)
  • 5 Yr 4hr/24x7 Proactive Care (U4G39E)
  • 3 Yr 6hr CTR Proactive Care (U4G40E)
  • 5 Yr 6hrCTR Proactive Care (U4G42E)

HP Networking Services

Services that add value to your business

The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

Additional Support and Services

To get more details about the HP Services available in your country, please visit Networking Services

Resources

Loading Collateral...

No content available
Brochures  (0) Type Size Date
Case studies  (0) Type Size Date
Datasheets / QuickSpecs  (0) Type Size Date
Fact sheets  (0) Type Size Date
Images  (0) Type Size Date
Newsletters  (0) Type Size Date
Posters  (0) Type Size Date
Reference guides  (0) Type Size Date
Related links  (0) Type Size Date
Reports  (0) Type Size Date
Solution briefs  (0) Type Size Date
TrendWatches  (0) Type Size Date
Videos  (0) Type Size Date
Webinars  (0) Type Size Date
White papers  (0) Type Size Date
Application notes  (0) Type Size Date
Configuration guides  (0) Type Size Date
Demo how to guides  (0) Type Size Date
Design guides  (0) Type Size Date
Feature matrixes  (0) Type Size Date
Installation guides  (0) Type Size Date
Manuals  (0) Type Size Date
PoC test plans  (0) Type Size Date
Reference architectures  (0) Type Size Date
Related links  (0) Type Size Date
Software  (0) Type Size Date
Solution briefs  (0) Type Size Date
Technical guides  (0) Type Size Date
Videos  (0) Type Size Date
White papers  (0) Type Size Date