HP 6400 cl Switch Series

Product overview

The HP 6400 cl Series consists of 6-port 10-GbE stackables with optional 10-GbE add-on modules. Loaded with full Layer 3 features, the 6400cl series switches offer low-cost 10-GbE for high-performance aggregation of clusters of Gigabit switches. Ideal for consolidating multiple wiring closets, the HP E6400 cl Series also provides fiber flexibility to connect remote campuses up to 40 km away.
  • Distribution layer
  • Layer 2 to Layer 4 feature set
  • High performance
  • Low-cost 10-GbE connectivity

Quality of Service (QoS)

  • Rate limiting — per-port ingress enforced maximums
  • Layer 4 prioritization — enables prioritization based on TCP/UDP ports
  • Traffic prioritization (IEEE 802.1p) — allows real-time traffic classification into eight priority levels mapped to eight queues
  • Class of Service (CoS) — sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ

Performance

  • 160 Gbps backplane with 119 mpps — unprecedented bandwidth for low-latency throughput
  • Selectable queuing configurations — increase performance by selecting the queuing configuration that best meets the requirements of network applications
  • Jumbo frames — on Gigabit and 10-Gigabit ports, allow high-performance remote backup and disaster-recovery services

Resiliency and high availability

  • Router redundancy (XRRP) — allows groups of two routers to dynamically back each other up to create highly available routed environments
  • IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking — support up to four trunks, each with up to four links (ports) per trunk; trunking across modules is supported
  • IEEE 802.1s Multiple Spanning Tree — provides high link availability in multiple VLAN environments by allowing multiple spanning trees
  • IEEE 802.1w Rapid Convergence Spanning Tree Protocol — increases network uptime through faster recovery from failed links
  • Optional redundant power supply — provides uninterrupted power (provided by HP 600 RPS/EPS)

Manageability

  • sFlow (RFC 3176) — wire-speed traffic accounting and monitoring
  • RMON and XRMON — provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
  • Stacking capability — single IP address management for a virtual stack of up to 16 switches

Layer 2 switching

  • HP's switch meshing — dynamically load balances across multiple active redundant links to increase available aggregate bandwidth
  • VLAN support and tagging — supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
  • GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
  • IEEE 802.1v protocol VLANs — isolate select non-IPv4 protocols automatically into their own VLANs

Layer 3 routing

  • Layer 3 IP routing — provides routing of IP at media speed; supports static routes, RIP, RIPv2, and OSPF

Security

  • Access control lists (ACLs) — provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number
  • Source-port filtering — allows only specified ports to communicate with each other
  • RADIUS/TACACS+ — eases switch management security administration by using a password authentication server
  • Secure Shell — encrypts all transmitted data for secure remote CLI access over IP networks
  • Secure Sockets Layer (SSL) — encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
  • IEEE 802.1X and RADIUS network logins — control port-based access for authentication and accountability
  • Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
  • Web-based authentication — similar to IEEE 802.1X, it provides a browser-based environment to authenticate clients that do not support the IEEE 802.1X supplicant
  • Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
  • Secure access to manage the 6400cl series — all access methods--CLI, GUI, or MIB--are securely encrypted through SSHv2, SSL, and/or SNMPv3

Convergence

  • IP multicast snooping and data-driven IGMP — automatically prevent flooding of IP multicast traffic

Warranty and support

HP 6400-6XG cl Switch (J8433A) HP 6410-6XG cl Switch (J8474A)
Ports
6 CX4 10-GbE ports (IEEE 802.3ak Type 10GBASE-CX4)

Duplex: full only

Supports a maximum of 8 10-GbE ports, with optional module

6 open 10-GbE X2 transceiver slots

Supports a maximum of 8 10-GbE ports, with optional module

Cabling
CX4 ports

Maximum distance:
  • 0.5 m to 15 m using CX4 cable
  • Up to 300 m using J8439A media converter using MMF
X2 transceiver slots
HP ProCurve 10-GbE X2-SC LR Optic
Maximum distance:
  • 9/125 µm single-mode cable = 2-10 km
  • 62.5 µm multimode cable @ 160 MHz/km = 2-26 meters
  • 62.5 µm multimode cable @ 200 MHz/km = 2-33 meters
  • 50 µm multimode cable @ 400 MHz/km = 2-66 meters
  • 50 µm multimode cable @ 500 MHz/km = 2-82 meters
  • 50 µm multimode cable @ 2000 MHz/km = 2-300 meters
  • 30 km (40 km using engineered link)
  • 0.5 m to 15 m using CX4 cable
  • Up to 300 m using J8439A media converter using MMF
HP ProCurve 10-GbE X2-SC SR Optic
Maximum distance:
  • 62.5 µm multimode cable @ 160 MHz/km = 2-26 meters
  • 62.5 µm multimode cable @ 200 MHz/km = 2-33 meters
  • 50 µm multimode cable @ 400 MHz/km = 2-66 meters
  • 50 µm multimode cable @ 500 MHz/km = 2-82 meters
  • 50 µm multimode cable @ 2000 MHz/km = 2-300 meters
  • 30 km (40 km using engineered link)
  • 0.5 m to 15 m using CX4 cable
  • Up to 300 m using J8439A media converter using MMF
HP ProCurve 10-GbE X2-SC ER Optic
Maximum distance:
  • 30 km (40 km using engineered link)
  • 0.5 m to 15 m using CX4 cable
  • Up to 300 m using J8439A media converter using MMF
HP ProCurve 10-GbE X2-CX4 Transceiver
Maximum distance:
  • 0.5 m to 15 m using CX4 cable
  • Up to 300 m using J8439A media converter using MMF
Physical characteristics
Dimensions 16.9(d) x 17.4(w) x 1.7(h) in. (42.93 x 44.2 x 4.32 cm) (1U height) 16.9(d) x 17.4(w) x 1.7(h) in. (42.93 x 44.2 x 4.32 cm) (1U height)
Weight 12.35 lb. (5.60 kg) 13.56 lb. (6.15 kg)
Memory and processor
Processor Motorola PowerPC MPC8245 @ 266 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 4 MB Motorola PowerPC MPC8245 @ 266 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 4 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
Latency < 11.7 µs (LIFO 64-byte packets) < 11.7 µs (LIFO 64-byte packets)
Throughput up to 119 million pps (64-byte packets) up to 119 million pps (64-byte packets)
Routing/Switching capacity 160 Gbps 160 Gbps
MAC address table size 16000 entries 16000 entries
Environment
Operating temperature 32°F to 131°F (0°C to 55°C); 104°F (40°C) when used with SR/LR/ER optics 32°F to 131°F (0°C to 55°C); 104°F (40°C) when used with SR/LR/ER optics
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity 15% to 95% @ 149°F (65°C), noncondensing 15% to 95% @ 149°F (65°C), noncondensing
Altitude up to 15,000 ft. (4.6 km) up to 15,000 ft. (4.6 km)
Acoustic Power: 55 dB; DIN 45635T.19 per ISO 7779 @ < 77°F (25°C) Power: 55 dB; DIN 45635T.19 per ISO 7779 @ < 77°F (25°C)
Electrical characteristics
Maximum heat dissipation 383 BTU/hr (404 kJ/hr), including use of optional cl modules with optics 383 BTU/hr (404 kJ/hr), including use of optional cl modules with optics
Voltage 100-127/200-240 VAC 100-127/200-240 VAC
Current 3/1.5 A 3/1.5 A
Maximum power rating 112 W 120 W
Frequency 50/60 Hz 50/60 Hz
Notes Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Safety
CSA 22.2 No. 60950EN 60950/IEC 60950UL 60950 CSA 22.2 No. 60950EN 60950/IEC 60950UL 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN: EN 55024, CISPR 24

ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated: IEC 61000-4-3; 3 V/m

EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge: IEC 61000-4-5; 1 kV/2 kV AC

Conducted: IEC 61000-4-6; 3 V

Power frequency magnetic field: IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions: IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods

Harmonics: EN 61000-3-2, IEC 61000-3-2

Flicker: EN 61000-3-3, IEC 61000-3-3

Management

HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)

Standards and protocols

Device management
  • HTML and telnet management
General protocols
  • IEEE 802.1D MAC Bridges
  • IEEE 802.1p Priority
  • IEEE 802.1Q VLANs
  • IEEE 802.1s Multiple Spanning Trees
  • IEEE 802.1v VLAN classification by Protocol and Port
  • IEEE 802.1w Rapid Reconfiguration of Spanning Tree
  • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • IEEE 802.3ae 10-Gigabit Ethernet
  • IEEE 802.3ak 10GBASE-CX4
  • IEEE 802.3x Flow Control
  • RFC 768 UDP
  • RFC 783 TFTP Protocol (revision 2)
  • RFC 792 ICMP
  • RFC 793 TCP
  • RFC 826 ARP
  • RFC 854 TELNET
  • RFC 951 BOOTP
  • RFC 1058 RIPv1
  • RFC 1542 BOOTP Extensions
  • RFC 2030 Simple Network Time Protocol (SNTP) v4
  • RFC 2131 DHCP
  • RFC 2453 RIPv2
  • RFC 3046 DHCP Relay Agent Information Option
IP multicast
  • RFC 3376 IGMPv3
MIBs
  • RFC 1213 MIB II
  • RFC 1493 Bridge MIB
  • RFC 1724 RIPv2 MIB
  • RFC 1850 OSPFv2 MIB
  • RFC 2096 IP Forwarding Table MIB
  • RFC 2618 RADIUS Client MIB
  • RFC 2620 RADIUS Accounting MIB
  • RFC 2665 Ethernet-Like-MIB
  • RFC 2668 802.3 MAU MIB
  • RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
  • RFC 2863 The Interfaces Group MIB
Network management
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  • RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
  • RFC 3164 BSD syslog Protocol
  • RFC 3176 sFlow
  • SNMPv1/v2c/v3
  • XRMON
OSPF
  • RFC 2328 OSPFv2
QoS/CoS
  • RFC 2474 DiffServ Precedence, including 8 queues/port
  • RFC 2597 DiffServ Assured Forwarding (AF)
  • RFC 2598 DiffServ Expedited Forwarding (EF)
Security
  • IEEE 802.1X Port Based Network Access Control
  • RFC 1492 TACACS+
  • RFC 2138 RADIUS Authentication
  • RFC 2866 RADIUS Accounting
  • Secure Sockets Layer (SSL)
  • SSHv1/SSHv2 Secure Shell

HP 10GbE Media Flex cl Module (J8435A)

10-Gigabit module with 2 X2 transceiver slots

Ports

2 open 10-GbE X2 transceiver slots

Physical characteristics

Dimensions: 6.81(d) x 4.5(w) x 1.6(h) in. (17.3 x 11.43 x 4.06 cm)
Weight: 0.64 lb. (0.29 kg)

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C); 104°F (40°C) when used with SR/LR/ER optics
Operating relative humidity: 15% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing

Notes

Duplex: full

Operating temperature is 32°F to 104°F (0°C to 40°C) if any X2 10-GbE optic or transceiver is inserted in any X2 slot.

Compatible products

HP 10GbE CX4 Copper cl Module (J8434A)

HP 10GbE CX4 Copper cl Module (J8434A)

2-port 10-Gigabit module with fixed CX4 connectors and 0.5 m cable

Ports

2 10-GbE ports (IEEE 802.3ak Type 10GBASE-CX4)
Duplex: full only

Physical characteristics

Dimensions: 6.81(d) x 4.5(w) x 1.5(h) in. (17.3 x 11.43 x 3.81 cm)
Weight: 0.67 lb. (0.3 kg)

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C)
Operating relative humidity: 15% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing

Cabling

Maximum distance:
  • 15 m using CX4 cable
  • 300 m using optical media converters and multimode fiber cable

Notes

Use CX4 10-GbE cable (0.5-15 m) or ProCurve 10-GbE CX4 Media Converter (J8439A).

Includes a single 0.5 m cable.

Compatible products

HP X131 10G X2 SC ER Transceiver (J8438A)

HP X131 10G X2 SC ER Transceiver (J8438A)

An X2 form-factor transceiver that supports the 10-Gigabit ER standard, providing 10-Gigabit connectivity up to 30 km on single-mode fiber (40 km on engineered links).

Ports

1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-ER)
Duplex: full only

Connectivity

Connector type: SC
Wavelength: 1550 nm

Physical characteristics

Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm)
Weight: 0.35 lb. (0.16 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32°F to 104°F (0°C to 40°C)
Operating relative humidity: 15% to 95%, noncondensing

Electrical characteristics

Power consumption typical: 3 W
Power consumption maximum: 4.5 W

Cabling

Cable type:
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1


Cable length: 2m to 30km (max 40km on engineered links)
Fiber type: Single Mode

Notes

Conditioning patch cord cables are not supported

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X130 CX4 Optical Media Converter (J8439A)

An optical media converter that connects to CX4 ports, providing 10-Gigabit connectivity up to 300 m on multimode fiber.

Physical characteristics

Dimensions: 2.83(d) x 0.98(w) x 0.59(h) in. (7.19 x 2.49 x 1.5 cm)
Weight: .06 lb. (0.03 kg)

Cabling

Maximum distance:
  • 62.5 µm multimode cable @ 150 MHz*km = 1-50 m
  • 50 µm multimode cable @ 500 MHz*km = 1-100 m
  • 50 µm multimode cable @ 2000 MHz*km = 1-300 m

Notes

Duplex: full

The CX4 Media Converter connects directly to the CX4 port, and a 12-strand multimode ribbon cable is used between CX4 Media Converters.

The 12-strand multimode ribbon cable can have either 62.5 or 50 micron core diameters, terminated by standard Multiple Terminations Push-pull Latch (MTP) connectors in a crossover configuration. The ribbon cables are known as Multi-fiber Push (MPO).

Users should specify a "crossover" (often called "key up/key up") configuration for the ribbon cable. Also, specify female-female cables to connect to ProCurve 10-GbE CX4 Media Converters.

For a suggested vendor of MPO ribbon cables, please see the "Cabling" answers on the "ProCurve 10-GbE Transceivers" FAQs Web page.

Compatible products

HP X131 10G X2 SC SR Transceiver (J8436A)

HP X131 10G X2 SC SR Transceiver (J8436A)

An X2 form-factor transceiver that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 meters on multimode fiber.

Ports

1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-SR)
Duplex: full only

Connectivity

Connector type: SC
Wavelength: 850 nm

Physical characteristics

Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm)
Weight: 0.35 lb. (0.16 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 1.7 W
Power consumption maximum: 2.4 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2-26m with 62.5 µm multimode cable @ 160 MHz*km
  • 2-33m with 62.5 µm multimode cable @ 200 MHz*km
  • 2-66m with 50 µm multimode cable @ 400 MHz*km
  • 2-82m with 50 µm multimode cable @ 500 MHz*km
  • 2-300m with 50 µm multimode cable @ 2000 MHz*km

Cable length: 2-300m
Fiber type: Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X131 10G X2 CX4 Transceiver (J8440C)

HP X131 10G X2 CX4 Transceiver (J8440C)

An X2 form-factor transceiver with a CX4 connector that provides 10-Gigabit connectivity up to 15 m over CX4 (copper) cable.

Ports

1 CX4 10-GbE port (IEEE 802.3ak Type 10GBASE-CX4)
Duplex: full only

Connectivity

Connector type: CX4

Physical characteristics

Dimensions: 3.54(d) x 1.42(w) x 0.53(h) in. (8.99 x 3.61 x 1.35 cm)
Weight: 0.18 lb. (0.08 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C)
Operating relative humidity: 15% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 1.0 W
Power consumption maximum: 3.3 W

Cabling

Maximum distance:
  • 15m with CX4 cables
  • 300m with optical media converter and multimode fiber cable

Notes

Connector: CX4; Duplex: full

Use CX4 10-GbE cable (0.5-15 m) or ProCurve 10-GbE CX4 Media Converter (J8439A).

For suggested vendors of CX4 cables, please see the "Cabling" answers on the "ProCurve 10-GbE Transceivers" FAQs Web page.

Optical Media Converter (OMC) J8439A is not supported on the C version as the power supply for the OMC was removed in this design.

Compatible products

HP X131 10G X2 SC LR Transceiver (J8437A)

HP X131 10G X2 SC LR Transceiver (J8437A)

An X2 form-factor transceiver that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on single-mode fiber.

Ports

1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR)
Duplex: full only

Connectivity

Connector type: SC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm)
Weight: 0.35 lb. (0.16 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32°F to 104°F (0°C to 40°C)
Operating relative humidity: 15% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 2 W
Power consumption maximum: 3 W

Cabling

Cable type:
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 10 km

Cable length: 2m to 10km with 9/125 µm single-mode cable
Fiber type: Single Mode

Notes

Conditioning patch cord cables are not supported

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber and designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable (BK837A)

HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable (BK837A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH) thermoplastic.
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also has a longitudal white stripe that runs the entire length of the cable.
  • Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46

Compatible products

HP 1 m PremierFlex OM3+ LC/LC Optical Cable (BK838A)

HP 1 m PremierFlex OM3+ LC/LC Optical Cable (BK838A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 2 m PremierFlex OM3+ LC/LC Optical Cable (BK839A)

HP 2 m PremierFlex OM3+ LC/LC Optical Cable (BK839A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 5 m PremierFlex OM3+ LC/LC Optical Cable (BK840A)

HP 5 m PremierFlex OM3+ LC/LC Optical Cable (BK840A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 15 m PremierFlex OM3+ LC/LC Optical Cable (BK841A)

HP 15 m PremierFlex OM3+ LC/LC Optical Cable (BK841A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 30 m PremierFlex OM3+ LC/LC Optical Cable (BK842A)

HP 30 m PremierFlex OM3+ LC/LC Optical Cable (BK842A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 50 m PremierFlex OM3+ LC/LC Optical Cable (BK843A)

HP 50 m PremierFlex OM3+ LC/LC Optical Cable (BK843A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
  • Bandwidth: 3000 MHz-km @ 850nm (Laser)
  • Jacket Color: Blue
  • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
  • Boot Color: White
  • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
  • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
  • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP E600 Redundant and External Power Supply (J8168A)

HP E600 Redundant and External Power Supply (J8168A)

The E600 Redundant and External Power Supply (RPS/EPS) has 6 RPS ports and 2 EPS ports and supplies backup and Power over Ethernet power.

Ports

6 redundant power supply ports
Restrictions: Each port can provide redundant +12 V power to a connected switch; only one port can provide power at a given time
2 external power supply ports
Restrictions: Provides 50 VDC external PoE to up to two ProCurve switch devices; provides max. of 408 W full power to one device, and half power (204 W each) if connected to two devices

Physical characteristics

Dimensions: 12.83(d) x 17.44(w) x 1.73(h) in. (32.59 x 44.3 x 4.39 cm) (1U height)
Weight: 11.78 lb. (5.34 kg), Fully loaded

Mounting

1U rack-mountable and wall-mountable enclosure using standard mounting hardware

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C)
Operating relative humidity: 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing
Altitude: up to 15,000 ft. (4.6 km)
Acoustic: Noise emission LwA=59.2 dB at virtual workspace, according to DIN 45635 T.19

Electrical characteristics

Description: The unit automatically adjusts to any voltage between 100-240 V and either 50 or 60 Hz
Voltage: 100-240 VAC
Current: 9/5 A
Maximum power rating: 800 W
RPS power: 180 W
PoE power: 408 W
Frequency: 50/60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

CSA 22.2 No. 60950
EN 60950/IEC 60950
UL 60950

Emissions

FCC Class A
VCCI Class A
EN 55022/CISPR 22 Class A

Immunity

EN: EN 55024, CISPR 24
ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated: IEC 61000-4-3; 3 V/m
EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.05 kV (signal line)
Surge: IEC 61000-4-5; 1 kV/2 kV AC
Conducted: IEC 61000-4-6; 3 V
Power frequency magnetic field: IEC 61000-4-8; 1 A/m, 50 or 60 Hz
Voltage dips and interruptions: IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
Harmonics: EN 61000-3-2, IEC 61000-3-2
Flicker: EN 61000-3-3, IEC 61000-3-3

Management

Provides information via port interfaces of attached devices

Notes

Supported devices
  • HP ProCurve Switch 2600-PWR Series, ProCurve Switch 2610 Series, ProCurve Switch 2610-PWR Series, ProCurve Switch 2800 Series, ProCurve Switch 2810 Series, ProCurve Switch 5300xl Series, ProCurve Switch 3400cl Series, ProCurve Switch 6400cl Series, and ProCurve Secure Router 7000dl Series

HP BladeSystem c-Class .5m 10-GbE CX4 Cable Option (444477-B21)

The CX4 cable connects 10GBase-CX4 connections on various platforms (servers, switches, storage, etc.) CX4 connections have the benefit of low power, low cost, and low latency versus other 10G connections.

Physical characteristics

Weight: 0.31 lb. (0.14 kg)

Compatible products

HP BladeSystem c-Class 1m 10-GbE CX4 Cable Option (444477-B22)

The CX4 cable connects 10GBase-CX4 connections on various platforms (servers, switches, storage, etc.) CX4 connections have the benefit of low power, low cost, and low latency versus other 10G connections.

Physical characteristics

Weight: 0.51 lb. (0.23 kg)

Compatible products

HP BladeSystem c-Class 3m 10-GbE CX4 Cable Option (444477-B23)

The CX4 cable connects 10GBase-CX4 connections on various platforms (servers, switches, storage, etc.) CX4 connections have the benefit of low power, low cost, and low latency versus other 10G connections.

Physical characteristics

Weight: 1 lb. (0.45 kg)

Compatible products

HP BladeSystem c-Class 15m 10-GbE CX4 Cable Option (444477-B27)

The CX4 cable connects 10GBase-CX4 connections on various platforms (servers, switches, storage, etc.) CX4 connections have the benefit of low power, low cost, and low latency versus other 10G connections.

Physical characteristics

Weight: 5.2 lb. (2.36 kg)

Compatible products

HP 6400 cl Switch Series

HP Care Packs for HP Networking

HP 6400-6XG cl Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (UA438E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (UA439E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UA440E)
  • 3-year, 24x7 SW phone support, software updates (UF791E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR864E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR865E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR866E)
  • Installation with minimum configuration, system-based pricing (U4826E)
  • Installation with HP-provided configuration, system-based pricing (U4830E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR940E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR941E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR942E)
  • 4-year, 24x7 SW phone support, software updates (UR943E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR944E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR945E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR946E)
  • 5-year, 24x7 SW phone support, software updates (UR947E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW344E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW345E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW346E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR868E)
  • 1-year, 24x7 software phone support, software updates (HR867E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS562E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS563E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS564E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS565E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS566E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS567E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS568E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS569E)
HP 6410-6XG cl Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (UA438E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (UA439E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UA440E)
  • 3-year, 24x7 SW phone support, software updates (UF791E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR864E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR865E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR866E)
  • Installation with minimum configuration, system-based pricing (U4826E)
  • Installation with HP-provided configuration, system-based pricing (U4830E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR940E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR941E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR942E)
  • 4-year, 24x7 SW phone support, software updates (UR943E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR944E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR945E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR946E)
  • 5-year, 24x7 SW phone support, software updates (UR947E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW344E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW345E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW346E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR868E)
  • 1-year, 24x7 software phone support, software updates (HR867E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS562E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS563E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS564E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS565E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS566E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS567E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS568E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS569E)

HP Networking Services

Services that add value to your business

The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

Additional Support and Services

To get more details about the HP Services available in your country, please visit Networking Services

Resources

Loading Collateral...

No content available
Brochures  (0) Type Size Date
Case studies  (0) Type Size Date
Datasheets / QuickSpecs  (0) Type Size Date
Fact sheets  (0) Type Size Date
Images  (0) Type Size Date
Newsletters  (0) Type Size Date
Posters  (0) Type Size Date
Reference guides  (0) Type Size Date
Related links  (0) Type Size Date
Reports  (0) Type Size Date
Solution briefs  (0) Type Size Date
TrendWatches  (0) Type Size Date
Videos  (0) Type Size Date
Webinars  (0) Type Size Date
White papers  (0) Type Size Date
Application notes  (0) Type Size Date
Configuration guides  (0) Type Size Date
Design guides  (0) Type Size Date
Feature matrixes  (0) Type Size Date
Installation guides  (0) Type Size Date
Manuals  (0) Type Size Date
PoC test plans  (0) Type Size Date
Reference architectures  (0) Type Size Date
Related links  (0) Type Size Date
Software  (0) Type Size Date
Solution briefs  (0) Type Size Date
Technical guides  (0) Type Size Date
Videos  (0) Type Size Date
White papers  (0) Type Size Date