HP 6600 Switch Series

Product overview

The HP 6600 Switch Series consists of advanced data center server edge switches. The 6600 Switch Series includes 10/100/1000BASE-T and 10GbE SFP+ 1U rackmount switches enhanced for server edge connectivity with front-to-back (reversible) airflow, redundant hot-swappable power, and redundant hot-swappable fans. The foundation for the switch series is a purpose-built, programmable ProVision ASIC that allows the most demanding networking features, such as quality of service (QoS) and security, to be implemented in a scalable yet granular fashion. With a variety of connectivity interfaces and expanded buffering, the HP 6600 Switch Series offers excellent investment protection, flexibility, and scalability, as well as ease of deployment and reduced operational expense.
  • Enhanced for data center server access layer
  • Front-to-back, reversible airflow
  • Redundant, hot-swappable power supplies and fans
  • 64K MAC address scalability
  • Consistent ProVision ASIC-based switch fabric

Software-defined networking

  • NEW OpenFlow — supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths

Quality of Service (QoS)

  • Layer 4 prioritization — enables prioritization based on TCP/UDP port numbers
  • Class of Service (CoS) — sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
  • Bandwidth shaping
    • Port-based rate limiting — provides per-port ingress-/egress-enforced increased bandwidth
    • Classifier-based rate limiting — uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port
    • Reduced bandwidth — provides per-port, per-queue egress-based reduced bandwidth
  • Advanced classifier-based QoS — classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis
  • Traffic prioritization — allows real-time traffic classification into eight priority levels mapped to eight queues

Data center optimized

  • Front-to-back airflow — designed to be collocated at the top of a server rack, the 6600 Switch Series supports front-to-back airflow (mechanically reversible) to support hot aisle/cold aisle configurations; the N+N fan tray is also hot-swappable, allowing easy replacement in the rack
  • Modular internal power supplies — support redundant, hot-swappable power supply configurations (units ship with one supply); power load is shared across dual supplies
  • Server-to-switch distributed trunking — supports Layer 2 LACP groups from a single server across two different switches for active-active server NIC teaming configurations
  • Power down idle ports — save power by powering down blocks of idle Gigabit and 10GbE ports; idle ports can be reinitialized without rebooting; available on 6600-24XG and 6600-48G-4XG models
  • Out-of-band management — remotely monitors and manages switch via Ethernet out-of-band management port; eliminates the need for terminal server network; available on 6600-24XG and 6600-48G-4XG models
  • Deployment/Serviceability — data connectivity and management ports are all front-side accessible, and power supplies and fan trays are rear-side accessible, allowing for easy maintenance and in-rack serviceability

Management

  • Remote intelligent mirroring — mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch located anywhere on the network
  • RMON, XRMON, and sFlow v5 — provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
  • Uni-Directional Link Detection (UDLD) — monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
  • Management simplicity — provided by common networking features and CLI implementation (common across HP 8200 zl, 6600, 6200 yl, 5400 zl, and 3500 Switches)
  • Command authorization — leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity
  • Friendly port names — allows assignment of descriptive names to ports
  • Multiple configuration files — stores easily to the flash image
  • Dual flash images — provides independent primary and secondary operating system files for backup while upgrading
  • Comware CLI
    • Comware-compatible CLI — bridges the experience of HP Comware CLI users who are using the HP ProVision software CLI
    • Display and fundamental Comware CLI commands — are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and fundamental commands provide a Comware-familiar initial switch setup
    • Configuration Comware CLI commands — when Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI command

Connectivity

  • Auto-MDIX — provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
  • Jumbo frames — on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services
  • IPv6
    • IPv6 host — enables switches to be managed in an IPv6 network
    • Dual stack (IPv4 and IPv6) — transitions from IPv4 to IPv6, supporting connectivity for both protocols
    • MLD snooping — forwards IPv6 multicast traffic to the appropriate interface
    • IPv6 ACL/QoS — supports ACL and QoS for IPv6 network traffic
    • IPv6 routing — supports static and OSPFv3 routing protocols
    • 6in4 tunneling — supports encapsulation of IPv6 traffic in IPv4 packets

Performance

  • High-speed, high-capacity architecture — based on the purpose-built ProVision ASICs to provide superior system performance and scalability
  • Selectable queue configurations — allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications

Resiliency and high availability

  • IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking — support up to 144 trunks, each with up to eight links (ports) per trunk
  • IEEE 802.1s Multiple Spanning Tree — provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
  • NEW Virtual Router Redundancy Protocol (requires Premium License) — allows groups of two routers to dynamically back each other up to create highly available routed environments
  • Spares simplicity — is made possible through the use of common power supplies, fan trays, and transceivers
  • Distributed trunking — enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect to two switches using one logical trunk for redundancy and load sharing
  • Uplink Failure Detection — provides active-standby network path redundancy for servers that are configured for active-standby NIC teaming
  • NEW SmartLink — provides easy-to-configure link redundancy of active and standby links

Layer 2 switching

  • HP switch meshing — dynamically load balances across multiple active redundant links to increase available aggregate bandwidth
  • GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
  • IEEE 802.1ad Q-in-Q (requires Premium License) — increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed campus or metro network
  • IEEE 802.1v protocol VLANs — isolate select non-IPv4 protocols automatically into their own VLANs
  • Rapid Per-VLAN Spanning Tree (RPVST+) — allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+

Layer 3 services

  • Loopback interface address — defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
  • User Datagram Protocol (UDP) helper function — allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
  • Route maps — provide more control during route redistribution; allow filtering and altering of route metrics

Layer 3 routing

  • Static IP routing — provides manually configured routing for both IPv4 and IPv6 networks
  • Routing Information Protocol (RIP) — provides RIPv1 and RIPv2 routing
  • OSPF (requires Premium License) — provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing
  • BGP (requires Premium License) — provides IPv4 Border Gateway Protocol routing that is scalable, robust, and flexible

Security

  • Source-port filtering — allows only specified ports to communicate with each other
  • RADIUS/TACACS+ — eases switch management security administration by using a password authentication server
  • Secure shell — encrypts all transmitted data for secure remote CLI access over IP networks
  • Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
  • MAC address lockout — prevents particular configured MAC addresses from connecting to the network
  • Detection of malicious attacks — monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks is detected
  • Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
  • Switch management logon security — helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
  • Secure management access — delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
  • ICMP throttling — defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic
  • Virus throttling — detects traffic patterns typical of worm-type viruses and either throttles or entirely prevents the virus from spreading across the routed VLANs or bridged interfaces without requiring external appliances
  • STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
  • Dynamic IP lockdown — works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing
  • DHCP protection — blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
  • Dynamic ARP protection — blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
  • USB Secure Autorun (requires HP PCM+) — deploys, diagnoses, and updates a switch using a USB flash drive; works with a secure credential to prevent tampering
  • STP root guard — protects the root bridge from malicious attacks or configuration mistakes
  • Management Interface Wizard — helps secure management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB at the desired level
  • Access control lists (ACLs) — provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on a per-VLAN or per-port basis
  • Multiple user authentication methods
    • Multiple IEEE 802.1X users per port — authenticates multiple IEEE 802.1X users per port
    • Web-based authentication — authenticates from Web browser for clients that do not support IEEE 802.1X supplicant
    • MAC-based authentication — client is authenticated with the RADIUS server based on client's MAC address
    • Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port — switch port accepts up to 32 sessions of IEEE 802.1X, Web, and MAC authentications
  • Switch CPU protection — provides automatic protection against malicious network traffic trying to shut down the switch
  • Identity-driven ACL — enables implementation of a highly granular and flexible access security policy specific to each authenticated network user
  • Secure Sockets Layer (SSL) — encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
  • Security banner — displays a customized security policy when users log in to the switch

Multicast support

  • IP multicast routing (requires Premium License) — includes PIM Sparse and Dense modes to route IP multicast traffic
  • IP multicast snooping (data-driven IGMP) — automatically prevents flooding of IP multicast traffic

Convergence

  • Auto VLAN configuration for voice
    • RADIUS VLAN — uses a standard RADIUS attribute and LLDP-MED to automatically configure a VLAN for IP phones
    • CDPv2 — uses CDPv2 to configure legacy IP phones
  • NEW Local MAC Authentication — assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes

Warranty and support

  • Lifetime warranty — advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†
  • Electronic and telephone support — limited electronic and business-hours telephone support is available from HP for the entire warranty period; to reach our support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary
  • Software releases — to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary
HP 6600-24G-4XG Switch (J9264A) HP 6600-24XG Switch (J9265A) HP 6600-48G-4XG Switch (J9452A)
I/O ports and slots
20 autosensing 10/100/1000 ports

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

4 dual-personality ports

each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10BASE-T; IEEE 802.3u Type 100BASE-TX; IEEE 802.3ab 1000BASE-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers)

4 SFP+ 10GbE ports

1 RS-232C DB-9 console port

24 SFP+ 10GbE ports

Duplex: full only

1 RJ-45 serial console port

1 RJ-45 out-of-band management port

48 RJ-45 autosensing 10/100/1000 ports

Media Type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

4 SFP+ 10GbE ports

Duplex: full only

1 RJ-45 serial console port

1 RJ-45 out-of-band management port

Power supplies
2 power supply slots

includes: 1 x J9269A (HP 6600 Switch Power Supply)

2 power supply slots

includes: 1 x J9269A (HP 6600 Switch Power Supply)

2 power supply slots

includes: 1 x J9269A (HP 6600 Switch Power Supply)

Fan tray
includes: 1 x J9271A includes: 1 x J9271A includes: 1 x J9271A
Physical characteristics
17.42(w) x 21.5(d) x 1.7(h) in (44.25 x 54.61 x 4.32 cm) (1U height) 17.42(w) x 25.25(d) x 1.7(h) in (44.25 x 64.14 x 4.32 cm) (1U height) 17.42(w) x 25.25(d) x 1.7(h) in (44.25 x 64.14 x 4.32 cm) (1U height)
Weight 17.2 lb (7.8 kg) 19.7 lb (8.94 kg) 23.5 lb (10.66 kg)
Memory and processor
Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 256 MB compact flash, 256 MB DDR SDRAM; packet buffer size: 36 MB QDR SDRAM total (18 MB for 1 GbE/10 GbE ports) Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 1 GB compact flash, 256 MB DDR SDRAM; packet buffer size: 108 MB QDR SDRAM total (for all 10 GbE ports) Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 1 GB compact flash, 256 MB DDR SDRAM; packet buffer size: 72 MB QDR SDRAM total (36 MB for 1 GbE/10 GbE ports)
Mounting and enclosure
Includes hardware for 2-post telco rack or equipment cabinet; horizontal surface mounting only. The 6600 Series Rack Kit (J9469A) is required for mounting in 4-post server/networking rack. Includes hardware for 2-post telco rack or equipment cabinet; horizontal surface mounting only. The 6600 Series Rack Kit (J9469A) is required for mounting in 4-post server/networking rack. Includes hardware for 2-post telco rack or equipment cabinet; horizontal surface mounting only. The 6600 Series Rack Kit (J9469A) is required for mounting in 4-post server/networking rack.
Performance
1000 Mb Latency < 3.4 µs (FIFO 64-byte packets) < 3.4 µs (FIFO 64-byte packets)
10 Gb/s Latency < 2.4 µs (FIFO 64-byte packets) < 2.4 µs (FIFO 64-byte packets) < 2.4 µs (FIFO 64-byte packets)
Throughput up to 75.7 million pps (64-byte packets) up to 240.2 million pps (64-byte packets) up to 130.9 million pps (64-byte packets)
Routing/Switching capacity 101.8 Gb/s 322.8 Gb/s 176 Gb/s
Switch fabric speed 105.6 Gb/s 345.6 Gb/s 176 Gb/s
Routing table size 10000 entries (IPv4) 10000 entries (IPv4) 10000 entries (IPv4)
MAC address table size 64000 entries 64000 entries 64000 entries
Environment
Operating temperature 41°F to 104°F (5°C to 40°C) 32°F to 104°F (0°C to 40°C) 41°F to 104°F (5°C to 40°C)
Operating relative humidity 15% to 80% @ 104°F (40°C), noncondensing 15% to 80% @ 104°F (40°C), noncondensing 15% to 80% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity 15% to 90% @ 149°F (65°C), noncondensing 15% to 90% @ 149°F (65°C), noncondensing 15% to 90% @ 158°F (70°C), noncondensing
Altitude up to 10,000 ft (3 km) up to 10,000 ft (3 km) up to 10,000 ft (3 km)
Acoustic Power: 68 dB, Pressure: 59.5 dB ISO 7779, ISO 9296 Power: 72 dB, Pressure: 61.8 dB ISO 7779, ISO 9296 Power: 71.8 dB, Pressure: 63.4 dB ISO 7779, ISO 9296
Electrical characteristics
Frequency 50/60 Hz 50/60 Hz 50/60 Hz
Achieved Miercom Certified Green Award Achieved Miercom Certified Green Award
Description The switch automatically adjusts to any voltage between 100-120 and 200-240 V with either 50 or 60 Hz. The switch automatically adjusts to any voltage between 100-120 and 200-240 V with either 50 or 60 Hz. The switch automatically adjusts to any voltage between 100-120 and 200-240 V with either 50 or 60 Hz.
Maximum heat dissipation 697 BTU/hr (735.33 kJ/hr) 1382 BTU/hr (1458.01 kJ/hr) 890 BTU/hr (938.95 kJ/hr)
AC voltage 100 - 120 / 200 - 240 VAC 100 - 120 / 200 - 240 VAC 100 - 120 / 200 - 240 VAC
Maximum power rating 204.3 W 405.4 W 261 W
Idle power 167.6 W 344.6 W 226 W
Safety
CSA 22.2 No. 60950EN 60950/IEC 60950UL 60950 CSA 22.2 No. 60950EN 60950/IEC 60950UL 60950 CSA 22.2 No. 60950EN 60950/IEC 60950UL 60950
Notes
Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later, for example, J9142B, J8177C).

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN: EN 55024, CISPR 24

ESD: IEC 61000-4-2

Radiated: IEC 61000-4-3

EFT/Burst: IEC 61000-4-4

Surge: IEC 61000-4-5

Conducted: IEC 61000-4-6

Power frequency magnetic field: IEC 61000-4-8

Voltage dips and interruptions: IEC 61000-4-11

Harmonics: EN 61000-3-2, IEC 61000-3-2

Flicker: EN 61000-3-3, IEC 61000-3-3

Management

HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu

Standards and protocols

BGP
  • RFC 1997 BGP Communities Attribute
  • RFC 2918 Route Refresh Capability
  • RFC 4271 A Border Gateway Protocol 4 (BGP-4)
  • RFC 4456 BGP Route Reflection: An Alternative to Full Mesh Internal BGP (IBGP)
  • RFC 5492 Capabilities Advertisement with BGP-4
Device management
  • RFC 1591 DNS (client)
  • HTML and telnet management
General protocols
  • IEEE 802.1ad Q-in-Q
  • IEEE 802.1AX-2008 Link Aggregation
  • IEEE 802.1D MAC Bridges
  • IEEE 802.1p Priority
  • IEEE 802.1Q VLANs
  • IEEE 802.1s Multiple Spanning Trees
  • IEEE 802.1v VLAN classification by Protocol and Port
  • IEEE 802.1w Rapid Reconfiguration of Spanning Tree
  • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • IEEE 802.3x Flow Control
  • RFC 768 UDP
  • RFC 783 TFTP Protocol (revision 2)
  • RFC 792 ICMP
  • RFC 793 TCP
  • RFC 826 ARP
  • RFC 854 TELNET
  • RFC 868 Time Protocol
  • RFC 951 BOOTP
  • RFC 1058 RIPv1
  • RFC 1350 TFTP Protocol (revision 2)
  • RFC 1519 CIDR
  • RFC 1542 BOOTP Extensions
  • RFC 2030 Simple Network Time Protocol (SNTP) v4
  • RFC 2131 DHCP
  • RFC 2453 RIPv2
  • RFC 2548 (MS-RAS-Vendor only)
  • RFC 3046 DHCP Relay Agent Information Option
  • RFC 3576 Ext to RADIUS (CoA only)
  • RFC 3768 VRRP
  • RFC 4675 RADIUS VLAN & Priority
  • RFC 5798 VRRP (exclude Accept Mode and sub-sec timer)
  • UDLD (Uni-directional Link Detection)
IP multicast
  • RFC 3376 IGMPv3 (host joins only)
  • RFC 3973 PIM Dense Mode
  • RFC 4601 PIM Sparse Mode
IPv6
  • RFC 1981 IPv6 Path MTU Discovery
  • RFC 2375 IPv6 Multicast Address Assignments
  • RFC 2460 IPv6 Specification
  • RFC 2464 Transmission of IPv6 over Ethernet Networks
  • RFC 2710 Multicast Listener Discovery (MLD) for IPv6
  • RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations (Ping only)
  • RFC 3019 MLDv1 MIB
  • RFC 3315 DHCPv6 (client and relay)
  • RFC 3484 Default Address Selection for IPv6
  • RFC 3587 IPv6 Global Unicast Address Format
  • RFC 3596 DNS Extension for IPv6
  • RFC 3810 MLDv2 for IPv6
  • RFC 4022 MIB for TCP
  • RFC 4087 IP Tunnel MIB
  • RFC 4113 MIB for UDP
  • RFC 4213 Basic Transition Mechanisms for IPv6 Hosts and Routers
  • RFC 4251 SSHv6 Architecture
  • RFC 4252 SSHv6 Authentication
  • RFC 4253 SSHv6 Transport Layer
  • RFC 4254 SSHv6 Connection
  • RFC 4291 IP Version 6 Addressing Architecture
  • RFC 4293 MIB for IP
  • RFC 4294 IPv6 Node Requirements
  • RFC 4419 Key Exchange for SSH
  • RFC 4443 ICMPv6
  • RFC 4541 IGMP & MLD Snooping Switch
  • RFC 4861 IPv6 Neighbor Discovery
  • RFC 4862 IPv6 Stateless Address Auto-configuration
  • RFC 5095 Deprecation of Type 0 Routing Headers in IPv6
  • RFC 5340 OSPFv3 for IPv6
  • RFC 5453 Reserved IPv6 Interface Identifiers
  • RFC 5519 Multicast Group Membership Discovery MIB (MLDv2 only)
  • RFC 5722 Handling of Overlapping IPv6 Fragments
MIBs
  • IEEE 802.1ap (MSTP and STP MIB's only)
  • RFC 1213 MIB II
  • RFC 1493 Bridge MIB
  • RFC 1724 RIPv2 MIB
  • RFC 1850 OSPFv2 MIB
  • RFC 2021 RMONv2 MIB
  • RFC 2096 IP Forwarding Table MIB
  • RFC 2613 SMON MIB
  • RFC 2618 RADIUS Client MIB
  • RFC 2620 RADIUS Accounting MIB
  • RFC 2665 Ethernet-Like-MIB
  • RFC 2668 802.3 MAU MIB
  • RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
  • RFC 2737 Entity MIB (Version 2)
  • RFC 2787 VRRP MIB
  • RFC 2863 The Interfaces Group MIB
  • RFC 2925 Ping MIB
  • RFC 2933 IGMP MIB
Network management
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  • RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
  • RFC 3176 sFlow
  • ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
  • SNMPv1/v2c/v3
  • XRMON
OSPF
  • RFC 2328 OSPFv2
  • RFC 3101 OSPF NSSA
  • RFC 5340 OSPFv3 for IPv6
QoS/CoS
  • RFC 2474 DiffServ Precedence, including 8 queues/port
  • RFC 2597 DiffServ Assured Forwarding (AF)
  • RFC 2598 DiffServ Expedited Forwarding (EF)
Security
  • IEEE 802.1X Port Based Network Access Control
  • RFC 1492 TACACS+
  • RFC 2865 RADIUS (client only)
  • RFC 2866 RADIUS Accounting
  • RFC 3579 RADIUS Support For Extensible Authentication Protocol (EAP)
  • Secure Sockets Layer (SSL)
  • SSHv2 Secure Shell

HP 6600 Switch Fan Tray (J9271A)

HP 6600 Switch Fan Tray (J9271A)

HP E6600 Switch Fan Tray. Ordered by customers for onsite sparing only (base systems J9263A, J9266A, J9264A, J9267A, J9265A comes with required fan tray).

Physical characteristics

5(w) x 5(d) x 5(h) in (12.7 x 12.7 x 12.7 cm)

Compatible products

HP X111 100M SFP LC FX Transceiver (J9054C)

HP X111 100M SFP LC FX Transceiver (J9054C)

A small form-factor pluggable (SFP) 100Base-FX transceiver that provides 100 Mbps full-duplex connectivity up to 2 km on multimode fiber.

Ports

1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX)
Duplex: half or full

Physical characteristics

Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2 km (full duplex) or 412 m (half duplex)

Notes

Transmitter wavelength: 1310nm

Power consumption is 1.1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J9054B 100-FX SFP-LC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

Compatible products

HP X112 100M SFP LC BX-D Transceiver (J9099B)

HP X112 100M SFP LC BX-D Transceiver (J9099B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "downstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D)
Duplex: full only

Physical characteristics

Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)
Weight: 0.04 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.

Power consumption is 1.1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver can only connect to a 100-BX-U product. You cannot connect two 100-BX-D transceivers together.)

Compatible products

HP X112 100M SFP LC BX-U Transceiver (J9100B)

HP X112 100M SFP LC BX-U Transceiver (J9100B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "upstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U)
Duplex: full only

Physical characteristics

Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)
Weight: 0.07 lb. (.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U transceiver can only connect to a 100-BX-D product. You cannot connect two 100-BX-U transceivers together.)

Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.

Power consumption is 1.1 watts maximum.

Compatible products

HP X132 10G SFP+ LC SR Transceiver (J9150A)

HP X132 10G SFP+ LC SR Transceiver (J9150A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 m on multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-SR)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.6 W
Power consumption maximum: 0.8 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2-26m with 62.5 µm multimode cable @ 160 MHz*km
  • 2-33m with 62.5 µm multimode cable @ 200 MHz*km
  • 2-66m with 50 µm multimode cable @ 400 MHz*km
  • 2-82m with 50 µm multimode cable @ 500 MHz*km
  • 2-300m with 50 µm multimode cable @ 2000 MHz*km

Cable length: 2-300m
Fiber type: Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC LR Transceiver (J9151A)

HP X132 10G SFP+ LC LR Transceiver (J9151A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on single-mode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.9 W
Power consumption maximum: 1 W

Cabling

Cable type:
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 2m-10km with 9/125 µm single-mode cable

Cable length: 2m to 10km
Fiber type: Single Mode

Notes

Conditioning patch cord cables are not supported.

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC LRM Transceiver (J9152A)

HP X132 10G SFP+ LC LRM Transceiver (J9152A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LRM standard, for 10-Gigabit connectivity up to 220 m on legacy multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.7 W
Power consumption maximum: 1 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations)

Maximum distance:

  • 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
  • 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
  • 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
  • 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
  • 0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km

Cable length: 0.5m to 220m
Fiber type: Multi Mode

Notes

For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the maximum distances listed above.

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X121 1G SFP LC LH Transceiver (J4860C)

HP X121 1G SFP LC LH Transceiver (J4860C)

A small form-factor pluggable (SFP) Gigabit LH (ZX) transceiver that provides a full-duplex Gigabit solution up to 80 km on single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Duplex: full only

Physical characteristics

Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: -40°F to 185°F (-40°C to 85°C)
Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 10-80,000 m (single-mode fiber)

Fiber type: Single Mode

Notes

Power consumption is 0.8 watts typical with 1 watt maximum at 100% utilization.

For distances less than 20 km, a 10 dB attenuator must be used.

For distances between 20 km and 40 km, a 5 dB attenuator must be used.

Attenuators can be purchased from most cable vendors.

Compatible products

HP X121 1G SFP LC SX Transceiver (J4858C)

HP X121 1G SFP LC SX Transceiver (J4858C)

A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.

Ports

1 LC 1000BASE-SX port
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W

Cabling

Cable type:
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

  • 2-220m with 62.5 µm core diameter, 160 MHz*km bandwidth
  • 2-275m with 62.5 µm core diameter, 200 MHz*km bandwidth
  • 2-500m with 50 µm core diameter, 400 MHz*km bandwidth
  • 2-550m with 50 µm core diameter, 500 MHz*km bandwidth

Cable length: 2-550m
Fiber type: Multi Mode

Compatible products

HP X121 1G SFP LC LX Transceiver (J4859C)

HP X121 1G SFP LC LX Transceiver (J4859C)

A small form-factor pluggable (SFP) Gigabit LX transceiver that provides a full-duplex Gigabit solution up to 10 km (single-mode) or 550 m (multimode).

Ports

1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:
  • Either single mode or multimode
  • 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively
  • Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

  • 2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth)
  • 2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth)
  • 2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth)
  • 2-10,000 m (single-mode fiber)

Notes

A mode conditioning patch cord may be needed in some multimode fiber installations.

Wavelength: 1310nm

Power Consumption: < 500mW Typical

Compatible products

HP X122 1G SFP LC BX-D Transceiver (J9142B)

HP X122 1G SFP LC BX-D Transceiver (J9142B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "downstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D)
Duplex: full only

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.

Power consumption is 1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9142B connects to the J9143B "upstream" transceiver, or to any IEEE-standard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D transceiver can only connect to a 1000-BX-U product. You cannot connect two 1000-BX-D transceivers together.)

Compatible products

HP X122 1G SFP LC BX-U Transceiver (J9143B)

HP X122 1G SFP LC BX-U Transceiver (J9143B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "upstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U)
Duplex: full only

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U transceiver can only connect to a 1000-BX-D product. You cannot connect two 1000-BX-U transceivers together.)

Power consumption is 1 watt maximum.

Compatible products

HP X132 10G SFP+ LC ER Transceiver (J9153A)

HP X132 10G SFP+ LC ER Transceiver (J9153A)

HP X132 10G SFP+ LC ER Transceiver: The SFP+ ER transceiver transmits 10Gbps of data up to a 40km distance over single mode fiber cable.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-ER)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

0.55(w) x 2.22(d) x 0.47(h) in (1.39 x 5.65 x 1.19 cm)
Weight: 0.04 lb (0.02 kg), Fully loaded
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Power consumption typical: 1.3 W
Power consumption maximum: 1.5 W

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 40km

Fiber type: Single Mode

Notes

Check switch release notes for minimum version of software required to support this transceiver.

Some switches have limits as to how many of this particular transceiver can be installed. See the release notes of the switch software/firmware being used for more details.

This transceiver is supported in 2910al switches with software release W.15.07.0002 or later.

Compatible products

HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable (J9281B)

HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable (J9281B)

A low-price 10-Gigabit connectivity option consisting of a 1 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 3.28 ft. (1 m)

Physical characteristics

Weight: .24 lb. (0.11 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (J9283B)

HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (J9283B)

A low-price 10-Gigabit connectivity option consisting of a 3 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 10 ft. (3 m)

Physical characteristics

Weight: .49 lb. (0.22 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable (J9285B)

HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable (J9285B)

A low-price 10-Gigabit connectivity option consisting of a 7 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 22.97 ft. (7 m)

Physical characteristics

Weight: 1.02 lb., Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable (J9300A)

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable (J9300A)

A 1m direct attach copper cable with an XFP connector attached on one end and an SFP+ connector attached on the other end. This cable provides a low price connectivity option between switches/servers/storage to interconnect XFP and SFP+ form factors.

Connectivity

Length: 3.28 ft. (1 m)

Physical characteristics

Weight: .27 lb. (0.12 kg), Fully loaded cable with XFP transcevier on one end and SFP+ on the other end

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 32°F to 158°F (0°C to 70°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Notes

XFP end consumes 2 watts SFP+ end consumes 0.036 watts

Compatible products

HP X244 10G XFP to SFP+ 3m Direct Attach Copper Cable (J9301A)

HP X244 10G XFP to SFP+ 3m Direct Attach Copper Cable (J9301A)

A 3m direct attach copper cable with an XFP connector attached on one end and an SFP+ connector attached on the other end. This cable provides a low price connectivity option between switches/servers/storage to interconnect XFP and SFP+ form factors.

Connectivity

Length: 9.84 ft. (3 m)

Physical characteristics

Weight: .51 lb. (0.23 kg), Fully loaded cable with XFP transcevier on one end and SFP+ on the other end

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Cabling

Maximum distance:
  • 3m Direct Attach Cable

Notes

XFP end consumes 2 watts SFP+ end conumes 0.036 watts

Compatible products

HP X244 10G XFP to SFP+ 5m Direct Attach Copper Cable (J9302A)

HP X244 10G XFP to SFP+ 5m Direct Attach Copper Cable (J9302A)

A 5m direct attach copper cable with an XFP connector attached on one end and an SFP+ connector attached on the other end. This cable provides a low price connectivity option between switches/servers/storage to interconnect XFP and SFP+ form factors.

Connectivity

Length: 16.4 ft. (5 m)

Physical characteristics

Weight: .74 lb. (0.34 kg), Fully loaded cable with XFP transcevier on one end and SFP+ on the other end

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Notes

XFP end consumes 2 watts SFP+ end conumes 0.036 watts

Compatible products

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber and designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:
  • 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

  • 10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
  • Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
  • Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
  • Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
  • CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
  • BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
  • Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
  • Jacket Color: Aqua for OM3 multimode per TIA 598
  • Boot Color: White
  • Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
  • Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
  • Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A)

1m (3.3ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.202 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 1m (3.3 ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable (QK733A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable (QK733A)

2m (6.6ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.205 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 2m (6.6 ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A)

5m (16.4ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.212 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 5m (16.4 ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable (QK735A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable (QK735A)

15m (49.2ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.235 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 15m (49.2ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A)

30m (98.4ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.269 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 30m (98.4ft)

Compatible products

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable (QK737A)

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable (QK737A)

50m (164.0ft) OM4 fiber optic cable, bend-insensitive; provides maximum performance across HP's entire Fibre Channel and Ethernet product families

Notes

Graded-index, "bendable" fiber optic multimode OM4 50/125um duplex cable and Ethernet assembly with LC/MPO duplex connectors on each end; RoHS compliant
  • Core diameter: 50um ±3um
  • Cladding diameter: 125um ±2um
  • Bandwidth: 4700 MHz-km @ 850nm (laser)
  • Jacket color: blue
  • Jacket material: OFNR (optical fiber, nonconductive, riser) LSZH (low smoke zero halogen) thermoplastic
  • Optical clarity-attenuation (total loss, including connectors): 0.315 db
  • Minimum recommended bend radius: 2 mm
Approximate loss @ bend radius (850 nm):
  • < 0.05 db @ 35.7 mm (2 turns)
  • < 0.1 db @ 15 mm (2 turns)
  • < 0.2 db @ 7.5 mm (2 turns)
Maximum reach (no bend):
  • 125 m (14.025Gb SW)
  • 380 m (10GbE)
  • 190 m (8.5Gb FC)
  • 400 m (4.25Gb FC)
Cable length: 50m (164.0ft)

Compatible products

HP BLc SFP+ 0.5m 10GbE Copper Cable (487649-B21)

HP BLc SFP+ 0.5m 10GbE Copper Cable (487649-B21)

A low-price 10-Gigabit connectivity option consisting of a 0.5m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 1.64 ft. (0.5 m)

Physical characteristics

Weight: .18 lb. (0.08 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP BLc SFP+ 1m 10GbE Copper Cable (487652-B21)

HP BLc SFP+ 1m 10GbE Copper Cable (487652-B21)

A low-price 10-Gigabit connectivity option consisting of a 1m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 3.28 ft. (1 m)

Physical characteristics

Weight: .24 lb. (0.11 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP BLc SFP+ 3m 10GbE Copper Cable (487655-B21)

HP BLc SFP+ 3m 10GbE Copper Cable (487655-B21)

A low-price 10-Gigabit connectivity option consisting of a 3m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 9.84 ft. (3 m)

Physical characteristics

Weight: 0.49 lb. (0.22 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP BLc SFP+ 5m 10GbE Copper Cable (537963-B21)

HP BLc SFP+ 5m 10GbE Copper Cable (537963-B21)

A low-price 10-Gigabit connectivity option consisting of a 5m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 16.40 ft. (5 m)

Physical characteristics

Weight: 0.75 lb. (0.34 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP BLc SFP+ 7m 10GbE Copper Cable (487658-B21)

HP BLc SFP+ 7m 10GbE Copper Cable (487658-B21)

A low-price 10-Gigabit connectivity option consisting of a 7m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 22.96 ft. (7 m)

Physical characteristics

Weight: 1.01 lb. (0.46 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties
  • Cable Characteristic Impedance: 100 ohms
  • Crosstalk between pairs: 2% max
  • Time delay: 1.31 nsec/ft
Physical Properties
  • Cable Diameter: 0.180"
  • Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable (J9286B)

HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable (J9286B)

A low-price 10-Gigabit connectivity option consisting of a 10m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 32.82 ft. (10 m)

Physical characteristics

15(w) x 12(d) x 3(h) in (38.1 x 30.48 x 7.62 cm)
Weight: 0.99 lb (0.45 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 23°F to 185°F (-5°C to 85°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Maximum power rating: 1.2 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
0.6 watts maximum per transceiver end

Notes

Electrical Properties:
  • Cable Characteristic Impedance: 100 ohms
Physical Properties:
  • Cable Diameter: 0.185"
  • Minimum Cable Bend Radius: .555"
This cables is supported on 2910al switches with W.15.07.0002 or later software.

Compatible products

HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable (J9287B)

HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable (J9287B)

A low-price 10-Gigabit connectivity option consisting of a 15m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 49.20 ft. (15 m)

Physical characteristics

15(w) x 12(d) x 3(h) in (38.1 x 30.48 x 7.62 cm)
Weight: 1.74 lb (0.79 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 23°F to 185°F (-5°C to 85°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Maximum power rating: 1.2 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
0.6 watts maximum per transceiver end

Notes

Electrical Properties:
  • Cable Characteristic Impedance: 100 ohms
Physical Properties:
  • Cable Diameter: 0.255"
  • Minimum Cable Bend Radius: 0.765"
This cable is supported on 2910al switches with W.15.07.002 or later software.

Compatible products

HP 6600 Switch Power Supply (J9269A)

HP 6600 Switch Power Supply (J9269A)

The HP E6600 Switch Power Supply provides a redundant, modular supply to provide hot-swappable AC power. The supplies provide instantaneous failover for Data Center environments where connectivity for server edge uptime is paramount

Physical characteristics

3.39(w) x 9.37(d) x 1.5(h) in (8.6 x 23.8 x 3.8 cm)
Weight: 2.45 lb (1.11 kg)

Environment

Operating temperature: 41°F to 104°F (5°C to 40°C)
Operating relative humidity: 15% to 80% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 90% @ 104°F (40°C), noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Notes: Notes: Power draw and heat dissipation are dependent on the number of power supplies installed.

Compatible products

HP 6600 Series Switch Rack Kit (J9469A)

HP 6600 Series Switch Rack Kit (J9469A)

The HP 6600 Series Switch Rack Kit provide telescoping rails and hardware to mount 6600 series switches in a 4-post, round hole or caged-nut networking or server racks. This mounting kit is designed to fit HP 10K racks as well as many 3rd party rack

Notes

Rack kit can be used to mount any of the E6600 switches (J9263A, J9264A, J9265A, J9451A, and J9452A) in HP 10K or other 3rd party 4-post racks.

Shipping weight: 5 lbs.

Compatible products

HP 6600-24XG, 48G and 48G-4XG Switch Air Plenum Kit (J9480A)

HP 6600-24XG, 48G and 48G-4XG Switch Air Plenum Kit (J9480A)

The HP E6600-24XG, 48G, 48G-4XG AirPlm Kit provides a 1U air plenum for E6600-24XG/E6600-48G/E6600-48G-4XG switches to optimize front-to-back airflow in a 4-port server or networking rack.


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 6600-24G and 24G-4XG Switch Air Plenum Kit (J9481A)

HP 6600-24G and 24G-4XG Switch Air Plenum Kit (J9481A)

HP E6600-24G and 24G-4XG Air Plenum Kit provides a 1U plenum for use with E6600-24G / E6600-24G-4XG switches to optimize airflow in a 4-port server or networking rack.


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 6600 Switch Premium License (J9305A)

HP 6600 Premium License adds advanced features such as BGP-4, OSFPv2/v3, PIM-DM, PIM-SM, VRRP, and QinQ to the HP 6600 Series Switches


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP Care Packs for HP Networking

HP 6600-24G-4XG Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U2855E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U2856E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6304E)
  • 3-year, 24x7 SW phone support, software updates (UE262E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR889E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR890E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR891E)
  • Installation with minimum configuration, system-based pricing (U4826E)
  • Installation with HP-provided configuration, system-based pricing (U4830E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR868E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR869E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR870E)
  • 4-year, 24x7 SW phone support, software updates (UR871E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR872E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR873E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR874E)
  • 5-year, 24x7 SW phone support, software updates (UR875E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW356E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW357E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW358E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR893E)
  • 1-year, 24x7 software phone support, software updates (HR892E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS610E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS611E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS612E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS613E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS614E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS615E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS616E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS617E)
HP 6600-24XG Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (U2855E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (U2856E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6304E)
  • 3-year, 24x7 SW phone support, software updates (UE262E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR889E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR890E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR891E)
  • Installation with minimum configuration, system-based pricing (U4826E)
  • Installation with HP-provided configuration, system-based pricing (U4830E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR868E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR869E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR870E)
  • 4-year, 24x7 SW phone support, software updates (UR871E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR872E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR873E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR874E)
  • 5-year, 24x7 SW phone support, software updates (UR875E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW356E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW357E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW358E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR893E)
  • 1-year, 24x7 software phone support, software updates (HR892E)
  • 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS610E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS611E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS612E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS613E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS614E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS615E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS616E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS617E)
HP 6600-48G-4XG Switch
  • 3-year, 4-hour onsite, 13x5 coverage for hardware (H4496E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware (H2893E)
  • 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6319E)
  • 3-year, 24x7 SW phone support, software updates (UE264E)
  • 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR894E)
  • 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR895E)
  • Installation with minimum configuration, system-based pricing (U4826E)
  • Installation with HP-provided configuration, system-based pricing (U4830E)
  • 4-year, 4-hour onsite, 13x5 coverage for hardware (UR884E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware (UR885E)
  • 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR886E)
  • 4-year, 24x7 SW phone support, software updates (UR887E)
  • 5-year, 4-hour onsite, 13x5 coverage for hardware (UR888E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware (UR889E)
  • 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR890E)
  • 5-year, 24x7 SW phone support, software updates (UR891E)
  • 3 Yr 6 hr Call-to-Repair Onsite (UW365E)
  • 4 Yr 6 hr Call-to-Repair Onsite (UW366E)
  • 5 Yr 6 hr Call-to-Repair Onsite (UW367E)
  • 1-year, 6 hour Call-To-Repair Onsite for hardware (HR898E)
  • 1-year, 24x7 software phone support, software updates (HR897E)
  • 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR896E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS618E)
  • 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS619E)
  • 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS620E)
  • 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS621E)
  • 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS622E)
  • 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS623E)
  • 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS624E)
  • 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS625E)

HP Networking Services

Services that add value to your business

The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

Additional Support and Services

To get more details about the HP Services available in your country, please visit Networking Services

Resources

Loading Collateral...

No content available
Brochures  (0) Type Size Date
Case studies  (0) Type Size Date
Datasheets / QuickSpecs  (0) Type Size Date
Fact sheets  (0) Type Size Date
Images  (0) Type Size Date
Newsletters  (0) Type Size Date
Posters  (0) Type Size Date
Reference guides  (0) Type Size Date
Related links  (0) Type Size Date
Reports  (0) Type Size Date
Solution briefs  (0) Type Size Date
TrendWatches  (0) Type Size Date
Videos  (0) Type Size Date
Webinars  (0) Type Size Date
White papers  (0) Type Size Date
Application notes  (0) Type Size Date
Configuration guides  (0) Type Size Date
Design guides  (0) Type Size Date
Feature matrixes  (0) Type Size Date
Installation guides  (0) Type Size Date
Manuals  (0) Type Size Date
PoC test plans  (0) Type Size Date
Reference architectures  (0) Type Size Date
Related links  (0) Type Size Date
Software  (0) Type Size Date
Solution briefs  (0) Type Size Date
Technical guides  (0) Type Size Date
Videos  (0) Type Size Date
White papers  (0) Type Size Date