Download high-res images

HP 8200 zl Switch Series

The HP 8200 Switch Series is a high performance, full-featured, highly available modular switch.

Close News FinderContact us

Click to enlarge or download images

HP 8200 zl Switch Series

Product overview

The HP 8200 zl Switch Series offers high performance, scalability, and a wide range of features in a high-availability platform that dramatically reduces complexity and provides reduced cost of ownership. As part of a unified wired and wireless network infrastructure solution, the 8200 zl switch series provides platform technology, system software, system management, application integration, wired and wireless integration, network security, and support that are common across HP modular and fixed-port switches. Together, they deliver an agile, cost-effective, high-availability network solution. With key technologies to provide solution longevity, the 8200 zl switch series is built to deliver long-term investment protection without added complexity for network core, aggregation, and high-availability access layer deployments. It provides these capabilities while bringing to market the industry's first highly available switch with a lifetime warranty.

Core, distribution, mission-critical access layer
Advanced high-availability AllianceONE integrated
Layer 2 to 4 and intelligent edge feature set
Enterprise-class performance and security
Scalable 10/100/1000 and 10 GbE connectivity

Featured Videos

HP 8200 zl Switch Series 7:21 min

Certifications

Download the Tolly Report

Competitive Performance, Power Consumption and TCO Evaluation Versus Cisco Catalyst 3750-X and 4500 Series.

HP 8200 zl Switch Series

Software-defined networking
Quality of Service (QoS)
HP AllianceOne integration
Management
Connectivity

Performance
Resiliency and high availability
Layer 2 switching
Layer 3 services
Layer 3 routing

Security
Convergence
Flexibility
Warranty and support

Software-defined networking

NEW OpenFlow — is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths

Quality of Service (QoS)

Advanced classifier-based QoS — classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis
Layer 4 prioritization — enables prioritization based on TCP/UDP port numbers
Traffic prioritization — allows real-time traffic classification into eight priority levels mapped to eight queues
Bandwidth shaping —
- Port-based rate limiting — provides per-port ingress-/egress-enforced increased bandwidth
- Classifier-based rate limiting — uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port
- Reduced bandwidth — provides per-port, per-queue egress-based reduced bandwidth
Class of Service (CoS) — sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ

HP AllianceOne integration

HP AllianceONE Services zl Module — allows you to embed applications directly into the network, either distributed throughout the network at the network edge or centralized in the core or distribution layer; for more information about the HP AllianceONE solution, visit the HP website

Management

Remote intelligent mirroring — mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch anywhere on the network
RMON, XRMON, and sFlow v5 — provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
Uni-Directional Link Detection (UDLD) — monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops
HP unified core-to-edge device/network management tools — provide HP networking portfolio-common device-level tools (CLI, Web GUI, and Menu) plus seamless integration into HP PCM+/Identity Driven Manager (IDM) network management deployments
Command authorization — leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity
Friendly port names — allow assignment of descriptive names to ports
Dual flash images — provides independent primary and secondary operating system files for backup while upgrading or fine-tuning the switch configuration
Multiple configuration files — can be stored to the flash image
HP unified core-to-edge features — HP ProVision portfolio-common feature implementation allows faster solution deployment
NEW Comware CLI —
- Comware-compatible CLI — bridges the experience of HP Comware CLI users who are using the HP ProVision software CLI
- Display and fundamental Comware CLI commands — are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and fundamental commands provide a Comware-familiar initial switch setup
- Configuration Comware CLI commands — when Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI command

Connectivity

High-density port connectivity — provides 12 interface module slots, up to 288 wire-speed 10/100/1000 PoE-enabled ports, or 96 10-GbE ports per system
IEEE 802.3az Energy Efficient Ethernet — lowers power consumption in periods of low-link usage (supported on v2 zl 10/100/1000 and 10/100 modules)
IEEE 802.3af Power over Ethernet (PoE) — provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
IEEE 802.3at Power Over Ethernet Plus — provides up to 30 W per port to IEEE 802.3 for PoE-/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
Jumbo frames — on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services
HP unified core-to-edge hardware — HP ProVision family-common interface and service modules, Gigabit optics/10 GbE transceivers, and power supplies enable sparing simplicity
Prestandard PoE support — detects and provides power to prestandard PoE devices; see the list of supported devices in the product FAQs at www.hp.com/networking
Auto-MDIX — automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
IPv6 —
- IPv6 host — enables switches to be managed in an IPv6 network
- Dual stack (IPv4 and IPv6) — transitions from IPv4 to IPv6, supporting connectivity for both protocols
- MLD snooping — forwards IPv6 multicast traffic to the appropriate interface
- IPv6 ACL/QoS — supports ACL and QoS for IPv6 network traffic
- IPv6 routing — supports static and OSPFv3 routing protocols
- 6in4 tunneling — supports encapsulation of IPv6 traffic in IPv4 packets

Performance

High-speed, high-capacity architecture — 1.12 Tbps crossbar switching fabric provides intra-module and inter-module switching with 739.2 million pps throughput on the purpose-built HP ProVision ASICs
Selectable queue configurations — allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
Scalable system design — chassis architecture/backplane provides built-in performance capacity/headroom to support next-generation high-density/high-speed connectivity

Resiliency and high availability

Nonstop switching — improves network availability to better support critical applications such as unified communication and mobility; interface and fabric modules continue switching traffic during failover from active to standby management module
Nonstop routing — enhances Layer 3 high availability; OSPFv2/v3 and VRRP will continue to operate and route network traffic during failover from an active to a standby management module
Redundant management, fabric, and power — provide enhanced system availability and continuity of operations
Distributed trunking — enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect to two switches using one logical trunk for redundancy and load sharing
IEEE 802.1s Multiple Spanning Tree Protocol — provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking — support up to 144 trunks, each with up to eight links (ports) per trunk
Proven ASIC and system architecture — the HP ProVision ASIC and platform architecture, leveraged from HP's successful 5400 zl, 3500, 6600, and 6200 yl switch series, reduces technology risk and provides reliable support and flexibility
HP zl family components — employ market-proven intelligent edge switch interface modules, optics, and power supplies to reduce technology risk and enhance system reliability
Hot-swappable modules — interface, management, and fabric modules as well as mini-GBIC optics and power supplies can be removed, swapped, or added to the system without interrupting ongoing switch operations
Redundant, hot-swappable cooling — redundant fan design and hot-swappable fan tray provide continuity of operation in case of a single fan failure
Passive system design — passive chassis backplane (no traffic-forwarding active componentry) provides system reliability and reduces the impact of a component failure
Virtual Route Redundancy Protocol — allows groups of two routers to dynamically back each other up to create highly available routed environments

Layer 2 switching

VLAN support and tagging — supports the IEEE 802.1Q standard and 2,048 VLANs simultaneously
IEEE 802.1v protocol VLANs — isolate select non-IPv4 protocols automatically into their own VLANs
GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
IEEE 802.1ad Q-in-Q — increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed campus or metro network
MAC-based VLAN — provides granular control and security; uses RADIUS to map a MAC address/user to specific VLANs (requires v2 modules)
Rapid Per-VLAN Spanning Tree (RPVST+) — allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
HP switch meshing — dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows concurrent Layer 3 routing with v2 modules

Layer 3 services

User Datagram Protocol (UDP) helper function — allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
Loopback interface address — defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
Route maps — provide more control during route redistribution; allow filtering and altering of route metrics

Layer 3 routing

Static IP routing — provides manually configured routing for both IPv4 and IPv6 networks
Routing Information Protocol (RIP) — provides RIPv1 and RIPv2 routing
OSPF — provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing
Policy-based routing — uses a classifier to select traffic that can be forwarded based on policy set by the network administrator (requires v2 modules)
Border Gateway Protocol (BGP) — provides IPv4 Border Gateway Protocol routing, which is scalable, robust, and flexible

Security

Access control lists (ACLs) — provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on a per-VLAN or per-port basis
Multiple user authentication methods —
- IEEE 802.1X users per port — provides authentication of multiple IEEE 802.1X users per port
- Web-based authentication — authenticates from a Web browser for clients that do not support IEEE 802.1X supplicant
- MAC-based authentication — authenticates client with the RADIUS server based on a client's MAC address
- Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port — accepts up to 32 sessions of IEEE 802.1X, Web, and MAC authentications
Virus throttling — detects traffic patterns typical of worm-type viruses and either throttles or entirely prevents the virus from spreading across the routed VLANs or bridged interfaces without requiring external appliances
DHCP protection — blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Secure management access — securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
Management Interface Wizard — helps secure management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB at the desired level
Switch CPU protection — provides automatic protection against malicious network traffic trying to shut down the switch
ICMP throttling — defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic
Identity-driven ACL — enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each authenticated network user
STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
Dynamic IP lockdown — works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing
Dynamic ARP protection — blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
Detection of malicious attacks — monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks is detected
Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout — prevents particular configured MAC addresses from connecting to the network
Source-port filtering — allows only specified ports to communicate with each other
RADIUS/TACACS+ — eases switch management security administration by using a password authentication server
Secure shell — encrypts all transmitted data for secure remote CLI access over IP networks
Secure Sockets Layer (SSL) — encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
Switch management logon security — helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
Security banner — displays a customized security policy when users log in to the switch
USB Secure Autorun (requires HP PCM+) — deploys, diagnoses, and updates a switch using a USB flash drive; works with a secure credential to prevent tampering
STP Root Guard — protects the root bridge from malicious attacks or configuration mistakes
Integrated Threat Management applications — includes advanced, scalable, switch-integrated security tools such as stateful firewall, intrusion detection/prevention system (IDS/IPS), and VPN concentrator via the HP Threat Management Services zl Module

Convergence

IP multicast routing — includes PIM Sparse and Dense modes to route IP multicast traffic
IP multicast snooping (data-driven IGMP) — automatically prevents flooding of IP multicast traffic
LLDP-MED (Media Endpoint Discovery) — is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
PoE allocations — support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient energy savings
Auto VLAN configuration for voice —
- RADIUS VLAN — uses a standard RADIUS attribute and LLDP-MED to automatically configure a VLAN for IP phones
- CDPv2 — uses CDPv2 to configure legacy IP phones

Flexibility

Unified wired and wireless deployment and management — employs the MSM765zl mobility controller and offers secure, advanced wireless services with simplified management and unified wired and wireless operation across the network
Complete feature set — provides Gigabit PoE for edge VoIP solutions, scalable 10 GbE for enterprise-class distribution-layer implementations, advanced wireless management for comprehensive mobility solutions, and critical high-availability features for midmarket core network deployments
Programmable ASIC design — allows the seamless addition of new QoS and security features over time without costly hardware upgrades

Warranty and support

Lifetime warranty — for as long as you own the product with advance replacement and next-business-day delivery (available in most countries)†
Electronic and telephone support — limited electronic and telephone support is available from HP; to reach our support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary
Software releases — to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary

HP 8200 zl Switch Series

8206 zl Switch with Premium Software (J9640A)
8212 zl Switch with Premium Software (J9641A)
8206-44G-PoE+-2XG v2 zl Switch with Premium Software (J9638A)
8212-92G-PoE+-2XG v2 zl Switch with Premium Software (J9639A)

Standards and protocols

	HP 8206 zl Switch with Premium Software (J9640A)	HP 8212 zl Switch with Premium Software (J9641A)	HP 8206-44G-PoE+-2XG v2 zl Switch with Premium Software (J9638A)
Included accessories
	1 HP 8200 zl Management Module (J9092A) 2 HP 8200 zl Fabric Module (J9093A) 1 HP 8200 zl System Support Module (J9095A)	1 HP 8200 zl Management Module (J9092A) 2 HP 8200 zl Fabric Module (J9093A) 1 HP 8200 zl System Support Module (J9095A) 1 HP 8200 zl Switch Premium License (J9474A)	1 HP 8200 zl Management Module (J9092A) 2 HP 8200 zl Fabric Module (J9093A) 1 HP 8200 zl System Support Module (J9095A) 1 HP 1500W PoE+ zl Power Supply (J9306A) 1 HP 24-port Gig-T PoE+ v2 zl Module (J9534A) 1 HP 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A) 1 HP 8200 zl Switch Premium License (J9474A)
Ports
	6 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 48 10GbE ports or 144 mini-GBICs, or a combination	12 open module slots Supports a maximum of 288 autosensing 10/100/1000 ports or 96 10GbE ports or 288 mini-GBICs, or a combination	44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ 10GbE ports Duplex: full only 4 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 48 10GbE ports or 144 mini-GBICs, or a combination
Power supplies
	2 power supply slots 1 minimum power supply required (ordered separately)	4 power supply slots 2 minimum power supplies required (ordered separately)	2 power supply slots 1 minimum power supply required includes: 1 x J9306A (HP 1500W PoE+ zl Power Supply)
Physical characteristics
	17.42(w) x 17.49(d) x 10.35(h) in (44.25 x 44.42 x 26.29 cm) (6U height)	17.5(w) x 18.7(d) x 15.6(h) in (44.45 x 47.5 x 39.62 cm) (9U height)	17.42(w) x 17.49(d) x 10.35(h) in (44.25 x 44.42 x 26.29 cm) (6U height)
Weight	48.1 lb (21.82 kg)	50.44 lb (22.88 kg)	61.49 lb (27.89 kg)
Memory and processor
Gigabit module	ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM	ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM	ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
10G module	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Management module	Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM	Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM	Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
Mounting
	Mounts in an EIA-standard 19 in telco rack/equipment cabinet (hardware included); horizontal surface mounting only. An optional 4-post cabinet rail is available (see ordering guide).	Mounts in an EIA-standard 19 in telco rack or equipment cabinet (hardware included); horizontal surface mounting only. An optional 4-post cabinet rail is available (see ordering guide).	Mounts in an EIA-standard 19 in telco rack/equipment cabinet (hardware included); horizontal surface mounting only. An optional 4-post cabinet rail is available (see ordering guide).
Performance
1000 Mb Latency	< 3.7 µs (FIFO 64-byte packets)	< 3.7 µs (FIFO 64-byte packets)	< 3.7 µs (FIFO 64-byte packets)
10 Gbps Latency	< 2.1 µs (FIFO 64-byte packets)	< 2.1 µs (FIFO 64-byte packets)	< 2.1 µs (FIFO 64-byte packets)
Throughput	up to 369.6 million pps	up to 739 million pps	up to 369.6 million pps
Routing/Switching capacity	496.8 Gbps	993.6 Gbps	496.8 Gbps
Switch fabric speed	561.6 Gbps	1.1 Tbps	561.6 Gbps
Routing table size	10000 entries (IPv4)	10000 entries (IPv4)	10000 entries (IPv4)
MAC address table size	64000 entries	64000 entries	64000 entries
Environment
Operating temperature	32°F to 113°F (0°C to 45°C)	32°F to 113°F (0°C to 45°C)	32°F to 113°F (0°C to 45°C)
Operating relative humidity	15% to 95% @ 131°F (55°C), noncondensing	15% to 95% @ 131°F (55°C), noncondensing	15% to 95% @ 131°F (55°C), noncondensing
Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity	15% to 95% @ 149°F (65°C), noncondensing	15% to 95% @ 149°F (65°C), noncondensing	15% to 95% @ 149°F (65°C), noncondensing
Altitude	up to 10,000 ft (3 km)	up to 10,000 ft (3 km)	up to 10,000 ft (3 km)
Acoustic	Power: 60.0 dB, Pressure: 41.3 dB; ISO 7779, ISO 9296	Power: 63.0 dB, Pressure: 47.8 dB; ISO 7779, ISO 9296	Power: 60.0 dB, Pressure: 41.3 dB; ISO 7779, ISO 9296
Electrical characteristics
Frequency	50/60 Hz	50/60 Hz	50/60 Hz
	Achieved Miercom Certified Green Award	Achieved Miercom Certified Green Award	Achieved Miercom Certified Green Award
Description	Chassis ships without power supplies. Two power supply slots are available; three different power supplies are available. See power supply products for additional specifications.	Chassis ships without power supplies. Four power supply slots are available; three different power supplies are available. See power supply products for additional specifications.	Chassis ships without power supplies. Two power supply slots are available; three different power supplies are available. See power supply products for additional specifications.
Maximum heat dissipation	2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. PoE)	4900 BTU/hr (5170 kJ/hr), (max. non-PoE); 7400 BTU/hr (7807 kJ/hr) (max. PoE)	2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. PoE)
Voltage	100-127/200-240 VAC	100-127/200-240 VAC	100-127/200-240 VAC
Notes	Power supplies must be ordered separately. A minimum of one J8712A, J8713A, or J9306A supply is required to power the system.	Power supplies must be ordered separately. A minimum of two J8712A, J8713A, or J9306A supplies are required to power the system.	Power supplies must be ordered separately. A minimum of one J8712A, J8713A, or J9306A supply is required to power the system.
Safety
	CSA 22.2 No. 60950UL 60950IEC 60950EN 60950IEC 60825	CSA 22.2 No. 60950UL 60950IEC 60950EN 60950IEC 60825	CSA 22.2 No. 60950UL 60950IEC 60950EN 60950IEC 60825
Notes
	Interface/Service modules, power supplies, and redundant management module must be ordered separately. RS-232C console port via an RJ-45 connector. Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).	Interface/Service modules, power supplies, and redundant management module must be ordered separately. RS-232C console port via an RJ-45 connector. Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).	Interface/Service modules, power supplies, and redundant management module must be ordered separately. RS-232C console port via an RJ-45 connector. Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

	HP 8212-92G-PoE+-2XG v2 zl Switch with Premium Software (J9639A)
Included accessories
	1 HP 8200 zl Management Module (J9092A) 2 HP 8200 zl Fabric Module (J9093A) 1 HP 8200 zl System Support Module (J9095A) 1 HP 8200 zl Switch Premium License (J9474A) 2 HP 1500W PoE+ zl Power Supply (J9306A) 3 HP 24-port Gig-T PoE+ v2 zl Module (J9534A) 1 HP 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A)
Ports
	92 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ 10GbE ports Duplex: full only 8 open module slots Supports a maximum of 288 autosensing 10/100/1000 ports or 96 10GbE ports or 288 mini-GBICs, or a combination
Power supplies
	4 power supply slots 2 minimum power supplies required includes: 2 x J9306A (HP 1500W PoE+ zl Power Supply)
Physical characteristics
	17.5(w) x 18.7(d) x 15.6(h) in (44.45 x 47.5 x 39.62 cm) (9U height)
Weight	102.76 lb (46.61 kg)
Memory and processor
Gigabit module	ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
10G module	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Management module	Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
Mounting
	Mounts in an EIA-standard 19 in telco rack or equipment cabinet (hardware included); horizontal surface mounting only. An optional 4-post cabinet rail is available (see ordering guide).
Performance
1000 Mb Latency	< 3.7 µs (FIFO 64-byte packets)
10 Gbps Latency	< 2.1 µs (FIFO 64-byte packets)
Throughput	up to 739 million pps
Routing/Switching capacity	993.6 Gbps
Switch fabric speed	1.1 Tbps
Routing table size	10000 entries (IPv4)
MAC address table size	64000 entries
Environment
Operating temperature	32°F to 113°F (0°C to 45°C)
Operating relative humidity	15% to 95% @ 131°F (55°C), noncondensing
Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity	15% to 95% @ 149°F (65°C), noncondensing
Altitude	up to 10,000 ft (3 km)
Acoustic	Power: 63.0 dB, Pressure: 47.8 dB; ISO 7779, ISO 9296
Electrical characteristics
Frequency	50/60 Hz
	Achieved Miercom Certified Green Award
Description	Chassis ships without power supplies. Four power supply slots are available; three different power supplies are available. See power supply products for additional specifications.
Maximum heat dissipation	4900 BTU/hr (5170 kJ/hr), (max. non-PoE); 7400 BTU/hr (7807 kJ/hr) (max. PoE)
Voltage	100-127/200-240 VAC
Notes	Power supplies must be ordered separately. A minimum of two J8712A, J8713A, or J9306A supplies are required to power the system.
Safety
	CSA 22.2 No. 60950UL 60950IEC 60950EN 60950IEC 60825
Notes
	Interface/Service modules, power supplies, and redundant management module must be ordered separately. RS-232C console port via an RJ-45 connector. Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

Emissions

FCC Class A; FCC part 15 Class A; ICE-003, Canadian Radio Interface Regulation; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN: EN 55024, CISPR 24

ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated: IEC 61000-4-3; 3 V/m

EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge: IEC 61000-4-5; 1 kV/2 kV AC

Conducted: IEC 61000-4-6; 3 V

Power frequency magnetic field: IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions: IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods

Harmonics: EN 61000-3-2, IEC 61000-3-2

Flicker: EN 61000-3-3, IEC 61000-3-3

Management

HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)

Standards and protocols

BGP

RFC 1997 BGP Communities Attribute
RFC 2918 Route Refresh Capability
RFC 4271 A Border Gateway Protocol 4 (BGP-4)
RFC 4456 BGP Route Reflection: An Alternative to Full Mesh Internal BGP (IBGP)
RFC 4724 Graceful Restart Mechanism for BGP
RFC 5492 Capabilities Advertisement with BGP-4

Denial of service protection

CPU DoS Protection

Device management

RFC 1591 DNS (client)
HTML and telnet management

General protocols

IEEE 802.1ad Q-in-Q
IEEE 802.1AX-2008 Link Aggregation
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and Port
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 2030 Simple Network Time Protocol (SNTP) v4
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 2548 (MS-RAS-Vendor only)
RFC 3046 DHCP Relay Agent Information Option
RFC 3576 Ext to RADIUS (CoA only)
RFC 3768 VRRP
RFC 4675 RADIUS VLAN & Priority
UDLD (Uni-directional Link Detection)

IP multicast

RFC 3376 IGMPv3 (host joins only)
RFC 3973 PIM Dense Mode
RFC 4601 PIM Sparse Mode

IPv6

RFC 1981 IPv6 Path MTU Discovery
RFC 2375 IPv6 Multicast Address Assignments
RFC 2460 IPv6 Specification
RFC 2464 Transmission of IPv6 over Ethernet Networks
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations (Ping only)
RFC 3019 MLDv1 MIB
RFC 3315 DHCPv6 (client and relay)
RFC 3484 Default Address Selection for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 3596 DNS Extension for IPv6
RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6
RFC 4022 MIB for TCP

RFC 4087 IP Tunnel MIB
RFC 4113 MIB for UDP
RFC 4213 Basic Transition Mechanisms for IPv6 Hosts and Routers
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4291 IP Version 6 Addressing Architecture
RFC 4293 MIB for IP
RFC 4294 IPv6 Node Requirements
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration
RFC 5095 Deprecation of Type 0 Routing Headers in IPv6
RFC 5340 OSPFv3 for IPv6
RFC 5453 Reserved IPv6 Interface Identifiers
RFC 5519 Multicast Group Membership Discovery MIB (MLDv2 only)
RFC 5722 Handling of Overlapping IPv6 Fragments

MIBs

IEEE 802.1ap (MSTP and STP MIB's only)
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 1850 OSPFv2 MIB
RFC 2021 RMONv2 MIB
RFC 2096 IP Forwarding Table MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2787 VRRP MIB
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 2933 IGMP MIB

Network management

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
SNMPv1/v2c/v3
XRMON

OSPF

RFC 2328 OSPFv2
RFC 3101 OSPF NSSA
RFC 3623 Graceful OSPF Restart (Unplanned Outages only)
RFC 5340 OSPFv3 for IPv6

QoS/CoS

RFC 2474 DiffServ Precedence, including 8 queues/port
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)

Security

IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
RFC 3579 RADIUS Support For Extensible Authentication Protocol (EAP)
Secure Sockets Layer (SSL)
SSHv2 Secure Shell

HP 8-port 10GBASE-T v2 zl Module (J9546A)

HP 8-port 10GBase-T v2 zl Module is for medum distance (upto 100m) 10G connectivity without the need for transceivers, using existing cabling infrastructure.

Ports

8 RJ-45 10-GbE ports
Duplex: full only

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.1 lb. (0.95 kg)
Full configuration weight: 2.1 lb. (0.95 kg)

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C)
Operating relative humidity: 15% to 95% @ 131°F (55°C), noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 158°F (70°C), noncondensing

Notes

Max Distance upto 100m with qualified 10Gbase-T Cat7(Shielded), Cat6a (Shielded/Unshielded) and Cat6 (Shielded, tested to 350Mhz TIA/EIA TSB-155A) cables. Max Distance upto 55m with Cat6 (unshielded, tested to 350Mhz TIA/EIA TSB-155A)

Compatible products

HP 8-port 10GbE SFP+ v2 zl Module (J9538A)

HP 8-port 10-GbE SFP+ v2 zl Module for HP E5400/E8200 series zl switches

Ports

8 open 10-GbE SFP+ transceiver slots

Physical characteristics

10.3(w) x 8.13(d) x 1.75(h) in (26.16 x 20.65 x 4.45 cm)
Weight: 2.09 lb (0.95 kg)

Environment

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When mini-GBICs are inserted in any mini-GBIC slot of a J9538A, this limits the operating temperature range of the chassis to 32F to 104F (0C to 40C).

Compatible products

HP 4-port 10GbE CX4 zl Module (J8708A)

4-port 10-GbE CX4 module for HP E series zl switches

Ports

4 CX4 10-GbE ports (IEEE 802.3ak Type 10GBASE-CX4)
Duplex: full only

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 1.74 lb. (0.79 kg)

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C)

Cabling

Maximum distance:

15 m using CX4 cable
300 m using optical media converters and multimode fiber cable

Notes

Use CX4 10-GbE cable (0.5 m-15 m) or HP ProCurve 10-GbE CX4 Media Converter (J8439A).

No CX4 cables are included with this module.

Compatible products

HP 4-port 10GbE X2 zl Module (J8707A)

4-port 10-GbE X2 module for E5400/E8200 Series zl Switches

Ports

4 open 10-GbE X2 transceiver slots

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 1.74 lb. (0.79 kg)

Environment

Operating temperature: 32°F to 104°F (0°C to 40°C)

Notes

When installed in a zl chassis, the J8707A module limits the operating temperature range of the chassis to 32°F to 104°F (0°C to 40°C).

Compatible products

HP 4-port 10GbE SFP+ zl Module (J9309A)

4-port 10-GbE SFP+ module for E5400/E8200 Series zl switches

Ports

4 open 10-GbE SFP+ transceiver slots

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 1.64 lb. (0.74 kg)

Environment

Operating temperature: 32°F to 113°F (0°C to 45°C)
Operating relative humidity: 15% to 95% @ 113°F (45°C), noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 158°F (70°C), noncondensing

Notes

When installed in a zl chassis, the J9309A module limits the operating temperature range of the chassis to 32F to 113F (0C to 45C).

Compatible products

HP 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A)

20-port 10/100/1000 PoE+ and 4-port mini-GBIC(SFP) module for HP E5400/E8200 series zl switches

Ports

2 open 10-GbE SFP+ transceiver slots
20 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
Media Type: Auto-MDIX
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.1 lb. (0.95 kg)

Environment

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When mini-GBICs are inserted in any mini-GBIC slot of a J9308A, this limits the operating temperature range of the chassis to 32F to 104F (0C to 40C).

Compatible products

HP 20-port Gig-T / 2-port 10GbE SFP+ v2 zl Module (J9548A)

HP 20-port Gig-T / 2-port 10-GbE SFP+ v2 zl Module for HP E5400/E8200 series zl switches

Ports

2 open 10-GbE SFP+ transceiver slots
20 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Media Type: Auto-MDIX
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.1 lb. (0.95 kg)

Environment

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When mini-GBICs are inserted in any mini-GBIC slot of a J9308A, this limits the operating temperature range of the chassis to 32F to 104F (0C to 40C).

Compatible products

HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module (J9535A)

20-port 10/100/1000 PoE+ and 4-port mini-GBIC(SFP) module for HP E5400/E8200 series zl switches

Ports

4 open mini-GBIC (SFP) slots
20 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
Media Type: Auto-MDIX
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.1 lb. (0.95 kg)

Environment

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When mini-GBICs are inserted in any mini-GBIC slot of a J9308A, this limits the operating temperature range of the chassis to 32F to 104F (0C to 40C).

Compatible products

HP 20-port Gig-T / 4-port SFP v2 zl Module (J9549A)

HP 20-port Gig-T / 4-port SFP v2 zl Module for HP E5400/E8200 series zl switches

Ports

4 open mini-GBIC (SFP) slots
20 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Media Type: Auto-MDIX
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.1 lb. (0.95 kg)

Environment

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When mini-GBICs are inserted in any mini-GBIC slot of a J9549A, this limits the operating temperature range of the chassis to 32F to 104F (0C to 40C).

Compatible products

HP 24-port SFP v2 zl Module (J9537A)

HP 24-port SFP v2 zl Module for HP E5400/E8200 series zl switches

Ports

24 open mini-GBIC (SFP) slots

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.01 lb. (0.91 kg)

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When installed in a zl chassis, the J8706A module limits the operating temperature range of the chassis to 32°F to 104°F (0°C to 40°C).

Compatible products

HP 12-port Gig-T PoE+ / 12-port SFP v2 zl Module (J9637A)

HP 12-port Gig-T PoE+ / 12-port SFP v2 zl Module for HP E5400/E8200 series zl switches

Ports

12 open mini-GBIC (SFP) slots
12 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
Media Type: Auto-MDIX
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.1 lb. (0.95 kg)

Environment

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When mini-GBICs are inserted in any mini-GBIC slot of a J9308A, this limits the operating temperature range of the chassis to 32F to 104F (0C to 40C).

Compatible products

HP 24-port Gig-T PoE+ v2 zl Module (J9534A)

24-port 10/100/1000 PoE+ module for E5400/E8200 series zl switches

Ports

24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
Media Type: Auto-MDIX
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.0 lb. (0.98 kg)

Environment

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Compatible products

HP 24-port Gig-T v2 zl Module (J9550A)

HP 24-port Gig-T v2 zl Module for E5400/E8200 series zl switches

Ports

24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Media Type: Auto-MDIX
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.0 lb. (0.98 kg)

Environment

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Compatible products

HP 24-port 10/100/1000 PoE zl Module (J8702A)

24-port 10/100/1000 PoE module for zl series switches

Ports

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.16 lb. (0.98 kg)

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Compatible products

HP 20-port Gig-T / 4-port Mini-GBIC zl Module (J8705A)

20-port 10/100/1000 PoE + 4-port mini-GBIC module for E8200/E5400 series zl switches.

Ports

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.2 lb. (1 kg)

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When mini-GBICs are inserted in any mini-GBIC slot of a J8705A, this limits the operating temperature range of the chassis to 32F to 104F (0C to 40C).

Compatible products

HP 24-port Mini-GBIC zl Module (J8706A)

24-port mini-GBIC module for HP E5400/E8200 series zl switches

Ports

24 open mini-GBIC (SFP) slots

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.01 lb. (0.91 kg)

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When installed in a zl chassis, the J8706A module limits the operating temperature range of the chassis to 32°F to 104°F (0°C to 40°C).

Compatible products

HP 24-port 10/100 PoE+ v2 zl Module (J9547A)

HP 24-port 10/100 PoE+ v2 zl Module for E5400/E8200 series zl switches.

Ports

24 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+)
Media Type: Auto-MDIX
Duplex: half or full

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.0 lb. (0.98 kg)

Environment

Cabling

Cable type:

100BASE-TX: Category 5 (or better), 100 Ω differential unshielded twisted pair (UTP) or shielded twisted pair (STP), complying with IEEE 802.3u 100BASE-TX

Compatible products

HP 24-port 10/100 PoE+ zl Module (J9478A)

24-port 10/100 PoE+ module for E5400/E8200 series zl switches.

Ports

24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX)
Media Type: Auto-MDIX
Duplex: half or full

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.0 lb. (0.98 kg)

Environment

Cabling

Cable type:

100BASE-TX: Category 5 (or better), 100 Ω differential unshielded twisted pair (UTP) or shielded twisted pair (STP), complying with IEEE 802.3u 100BASE-TX

Compatible products

HP 24-port 10/100/1000 PoE+ zl Module (J9307A)

24-port 10/100/1000 PoE+ module for E5400/E8200 series zl switches

Ports

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.0 lb. (0.98 kg)

Environment

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Compatible products

HP 20-port 10/100/1000 PoE+ / 4-port Mini-GBIC zl Module (J9308A)

20-port 10/100/1000 PoE+ and 4-port mini-GBIC(SFP) module for HP E5400/E8200 series zl switches

Ports

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 2.1 lb. (0.95 kg)

Environment

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Notes

When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

When mini-GBICs are inserted in any mini-GBIC slot of a J9308A, this limits the operating temperature range of the chassis to 32F to 104F (0C to 40C).

Compatible products

HP 8200 zl System Support Module (J9095A)

HP E8200 Series System Support Module. Ordered by customers for onsite sparing only (The base system comes with required module).

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.4(h) in. (26.16 x 20.65 x 3.55 cm)
Weight: 1.00 lb. (0.45 kg)

Environment

Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95%, noncondensing

Compatible products

»HP 8200 zl Switch Series

HP 8200 zl Management Module (J9092A)

Module for use with E8200 Series chassis. With RJ-45 serial console port for out-of-band management access. Order module to provide for a dual, redundant mgmt module deployment (base system comes with a single module) or for onsite sparing

Ports

1 RJ-45 serial console port

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.4(h) in. (26.16 x 20.65 x 3.55 cm)
Weight: 1.20 lb. (0.54 kg)

Environment

Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95%, noncondensing

Compatible products

»HP 8200 zl Switch Series

HP 8200 zl Fabric Module (J9093A)

HP E8200 Switch series Fabric Module. Ordered by customers for onsite sparing only (base configuration includes required fabric modules).

Physical characteristics

Dimensions: 10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm)
Weight: 1.65 lb. (0.75 kg)

Environment

Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95%, noncondensing

Compatible products

»HP 8200 zl Switch Series

HP Survivable Branch Communication zl Module powered by MicrosoftÂ® Lync (J9485A)

HP Survivable Branch Communication zl Module (SBM) powered by Microsoft Lync provides survivable branch services such as external phone call capability while sustaining internal peer-to-peer communications when the data center cannot be reached.

Ports

1 USB 2.0

Physical characteristics

Dimensions: 9.75(d) x 8.13(w) x 3.5(h) in. (24.77 x 20.65 x 8.89 cm)
Weight: 4.5 lb. (2.04 kg)

Environment

Operating temperature: 32°F to 122°F (0°C to 50°C); Important: See note for 50°C temperature spec rules
Operating relative humidity: 15% to 90% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature: 14°F to 149°F (-10°C to 65°C)
Nonoperating/Storage relative humidity: 15% to 90% @ 149°F (65°C), noncondensing
Altitude: up to 10,000 ft. (3 km)

Notes

HP 5400 zl chassis operating temperature specifications when the services module is installed: 45°C when any services module is installed in the right side of the chassis, 50°C when all services modules are installed in the left side of the chassis.

Up to four services modules can be installed in an HP 5412 zl/8212 zl Switch chassis simultaneously. Up to two services modules can be installed in an HP 5406 zl/8206 zl Switch chassis simultaneously.

When the services module is installed, the maximum relative humidity for the switch drops from 95% to 90%.

Compatible products

HP Services zl Module for Avaya Aura Session Border Controller powered by Acme Packet (J9486A)

The HP AllianceONE Services zl Module for Avaya Aura™ Session Border Controller (SBC) allows businesses to secure the enterprise perimeter for real-time interactive communications and provides clear demarcation point to ensure maximum service reach.

Physical characteristics

Dimensions: 9.75(d) x 8.13(w) x 3.5(h) in. (24.77 x 20.65 x 8.89 cm)
Weight: 4.5 lb. (2.04 kg)

Environment

Notes

When the services module is installed, the maximum relative humidity for the switch drops from 95% to 90%.

The SBC software and licenses are procured from Avaya or Avaya authorized resellers.

This product does not support Avaya Aura SBC HA functionality.

Compatible products

HP Threat Management Services zl Module with 1-year IPS Subscription Service (J9156A)

The Threat Management Service (TMS) zl Module is a multi-function security system for the Switch 5400zl Series and Switch 8200zl Series. Included is a 1-year IDS/IPS signature subscription.

Physical characteristics

Dimensions: 9.75(d) x 8.13(w) x 1.75(h) in. (24.77 x 20.65 x 4.45 cm)
Weight: 3.25 lb. (1.47 kg)

Environment

Operating temperature: 32°F to 50°F (0°C to 10°C)
Operating relative humidity: 15% to 90% @ 122°F (50°C), noncondensing
Nonoperating/Storage temperature: 14°F to 149°F (-10°C to 65°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Maximum heat dissipation: 272 BTU/hr (286.96 kJ/hr)
Maximum power rating: 80 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Notes

Chassis operating temperature specifications of the E5400 zl/E8212 zl switch when services module is installed:

40°C when any services module is installed in the right side of the chassis
50°C when all services modules are installed in the left side of the chassis

Up to 4 services modules can be installed in an E5400 zl/E8212 zl chassis simultaneously. Up to 3 services modules are supported (all installed in the left half of the chassis) in the E5406 zl chassis if a 50°C temperature specification is desired.

When the services module is installed, the maximum relative humidity for the switch drops from 95% to 90%.

Compatible products

HP Threat Management Services zl Module (J9155A)

The HP Threat Management Services (TMS) zl Module is a multi-function security system for the Switch E5400 zl Series and E8200 zl Series. It is comprised of a stateful firewall, intrusion detection/prevention system (IDS/IPS), and VPN concentrator.

Physical characteristics

Dimensions: 9.75(d) x 8.13(w) x 1.75(h) in. (24.77 x 20.65 x 4.45 cm)
Weight: 3.25 lb. (1.47 kg)

Environment

Operating temperature: 32°F to 122°F (0°C to 50°C); important: see note for 50°C temperature specification rules
Operating relative humidity: 15% to 90% @ 122°F (50°C), noncondensing
Nonoperating/Storage temperature: 14°F to 149°F (-10°C to 65°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Maximum heat dissipation: 272 BTU/hr (287 kJ/hr)
Maximum power rating: 80 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Notes

Following are chassis operating temperature specifications of the 5400zl/8212zl switch when services modules are installed:

40°C when any services module is installed in the right side of the chassis
50°C when all services modules are installed in the left side of the chassis

Up to four services modules can be installed in a 5400zl/8212zl chassis simultaneously. Up to three services modules are supported (all installed in the left half of the chassis) in the 5406zl chassis if a 50°C temperature specification is desired.

When the services module is installed, the maximum relative humidity for the switch drops from 95% to 90%.

Compatible products

HP Services zl Module (J9289A)

The HP AllianceONE Services zl Module provides the server and storage resources to run HP AllianceONE certified applications and services within a zl switch slot.

Physical characteristics

Dimensions: 9.75(d) x 8.13(w) x 1.75(h) in. (24.77 x 20.65 x 4.45 cm) (1U height)
Weight: 3.25 lb. (1.47 kg)

Environment

Operating temperature: 32°F to 122°F (0°C to 50°C); Important: See note for 50°C temperature spec rules
Operating relative humidity: 15% to 90% @ 122°F (50°C), noncondensing
Nonoperating/Storage temperature: 14°F to 149°F (-10°C to 65°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing
Altitude: up to 10,000 ft. (3 km)

Notes

The services module can only be used with certified AllianceONE services applications. It does not support a general application environment.

Chassis operating temperature specifications for the 5400zl chassis when the services module is installed:

40°C when any services module is installed in the right side of the chassis
50°C when all services modules are installed in the left side of the chassis

Up to four services modules can be installed in a 5400zl/8200zl chassis simultaneously. Up to three services modules are supported (all installed in the left side of the chassis) in the 5406zl chassis if a 50°C temperature specification is desired.

When the services module is installed, the maximum relative humidity for the switch drops from 95% to 90%.

Compatible products

HP Advanced Services zl Module (J9483A)

The HP AllianceONE Advanced Services zl Module is a performance optimized platform that brings best value for integration of network applications inside the 5400zl and 8200zl switch family that supports both Linux and Windows environments.

Physical characteristics

Dimensions: 9.75(d) x 8.13(w) x 1.75(h) in. (24.77 x 20.65 x 4.45 cm) (1U height)
Weight: 3.3 lb. (1.5 kg)

Environment

Notes

The services module can only be used with certified AllianceONE services applications. It does not support a general application environment.

Chassis operating temperature specifications when the services module is installed:
For the 5400zl chassis, if all modules are installed in the left side of the chassis, the temperature specification is set to 50°C for the chassis.
If any modules are installed on the right side of the chassis, then the temperature specification for the chassis is 45°C.
For the 8200zl chassis, the temperature specification is set to 45°C.
A maximum of 4 of these modules may be installed in any zl switch (except the 8206zl chassis, which supports a maximum of 2 of these modules).
If a module is installed in excess of these quantities, the module will not boot.
If you are running a 5406zl and want the 50°C temperature specification, then only three modules are supported in the chassis as that is all the slots there are on the left side.
When the services module is installed, the maximum relative humidity for the switch drops from 95% to 90%.

Compatible products

HP Advanced Services zl Module with MicrosoftÂ® WindowsÂ® Server 2008 R2 Standard (J9666A)

The HP Advanced Services zl Module with Microsoft® Windows® Server 2008 R2 Standard Edition is a zl module for the HP 5400 zl and HP 8200 zl switch series that provides Microsoft network services in the branch.

Physical characteristics

Dimensions: 9.75(d) x 8.13(w) x 1.75(h) in. (24.77 x 20.65 x 4.45 cm)
Weight: 3.3 lb. (1.5 kg)

Environment

Operating temperature: 32°F to 122°F (0°C to 50°C); important: see note for 50°C temperature specification
Operating relative humidity: 15% to 90% @ 122°F (50°C), noncondensing
Nonoperating/Storage temperature: 14°F to 149°F (-10°C to 65°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 149°F (65°C), noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Maximum heat dissipation: 140/266 BTU/hr (147.7/280.63 kJ/hr), connected
Idle power: 41 W
Maximum power rating: 78 W
Notes: Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Management

command-line interface

Notes

Chassis module support and operating temperature specifications:

The 5400 zl and 8200 zl switch series can support up to four Advanced Services zl Modules, except for the 8206 zl switch, which can support up to two services modules.
Switch operating temperature specifications of the 5400 zl switch series when the Advanced Services zl Module is installed: 45°C when any services module is installed in the right side of the switch; 50°C when all services modules are installed in the left side of the switch. Up to three services modules are supported (all installed in the left side of the switch) in the 5406 zl switch if a 50°C temperature specification is chosen.
The 45°C limit always applies to the 8200 zl series switches no matter where the Advanced Services zl Modules are installed.

Compatible products

HP Advanced Services zl Module with Citrix XenServer platform (J9747A)

The HP Advanced Services zl Module with Citrix XenServer is a converged networking, computing, and virtualization solutions inside the 5400zl and 8200zl switch family that hosts one or multiple networking or business application inside the switch.

Physical characteristics

Dimensions: 9.75(d) x 8.13(w) x 1.75(h) in. (24.77 x 20.65 x 4.45 cm) (1U height)
Weight: 3.3 lb. (1.5 kg)

Environment

Electrical characteristics

Maximum heat dissipation: 140/266 BTU/hr (147.7/280.63 kJ/hr)
Idle power: 41 W
Maximum power rating: 78 W
Notes: Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Management

command-line interface

Notes

The services module can only be used with certified AllianceONE services applications. It does not support a general application environment.

Chassis operating temperature specifications when the services module is installed:
For the 5400zl chassis, if all modules are installed in the left side of the chassis, the temperature specification is set to 50°C for the chassis.
If any modules are installed on the right side of the chassis, then the temperature specification for the chassis is 45°C.
For the 8200zl chassis, the temperature specification is set to 45°C.
A maximum of 4 of these modules may be installed in any zl switch (except the 8206zl chassis, which supports a maximum of 2 of these modules).
If a module is installed in excess of these quantities, the module will not boot.
If you are running a 5406zl and want the 50°C temperature specification, then only three modules are supported in the chassis as that is all the slots there are on the left side.
When the services module is installed, the maximum relative humidity for the switch drops from 95% to 90%.

Compatible products

HP Advanced Services zl Module with VMware vSphere Platform (J9748A)

The HP Advanced Services zl Module with VMware vSphere is a converged networking, computing, and virtualization solutions inside the 5400zl and 8200zl switch family that hosts one or multiple networking or business application inside the switch

Physical characteristics

Dimensions: 9.75(d) x 8.13(w) x 1.75(h) in. (24.77 x 20.65 x 4.45 cm) (1U height)
Weight: 3.3 lb. (1.5 kg)

Environment

Electrical characteristics

Management

command-line interface

Notes

The services module can only be used with certified AllianceONE services applications. It does not support a general application environment.

Chassis operating temperature specifications when the services module is installed:
For the 5400zl chassis, if all modules are installed in the left side of the chassis, the temperature specification is set to 50°C for the chassis.
If any modules are installed on the right side of the chassis, then the temperature specification for the chassis is 45°C.
For the 8200zl chassis, the temperature specification is set to 45°C.
A maximum of 4 of these modules may be installed in any zl switch (except the 8206zl chassis, which supports a maximum of 2 of these modules).
If a module is installed in excess of these quantities, the module will not boot.
If you are running a 5406zl and want the 50°C temperature specification, then only three modules are supported in the chassis as that is all the slots there are on the left side.
When the services module is installed, the maximum relative humidity for the switch drops from 95% to 90%.

Compatible products

HP X131 10G X2 SC ER Transceiver (J8438A)

An X2 form-factor transceiver that supports the 10-Gigabit ER standard, providing 10-Gigabit connectivity up to 30 km on single-mode fiber (40 km on engineered links).

Ports

1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-ER)
Duplex: full only

Connectivity

Connector type: SC
Wavelength: 1550 nm

Physical characteristics

Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm)
Weight: 0.35 lb. (0.16 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32°F to 104°F (0°C to 40°C)
Operating relative humidity: 15% to 95%, noncondensing

Electrical characteristics

Power consumption typical: 3 W
Power consumption maximum: 4.5 W

Cabling

Cable type:

Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Cable length: 2m to 30km (max 40km on engineered links)
Fiber type: Single Mode

Notes

Conditioning patch cord cables are not supported

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X131 10G X2 SC SR Transceiver (J8436A)

An X2 form-factor transceiver that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 meters on multimode fiber.

Ports

1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-SR)
Duplex: full only

Connectivity

Connector type: SC
Wavelength: 850 nm

Physical characteristics

Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm)
Weight: 0.35 lb. (0.16 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 1.7 W
Power consumption maximum: 2.4 W

Cabling

Cable type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km

Cable length: 2-300m
Fiber type: Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X131 10G X2 CX4 Transceiver (J8440C)

An X2 form-factor transceiver with a CX4 connector that provides 10-Gigabit connectivity up to 15 m over CX4 (copper) cable.

Ports

1 CX4 10-GbE port (IEEE 802.3ak Type 10GBASE-CX4)
Duplex: full only

Connectivity

Connector type: CX4

Physical characteristics

Dimensions: 3.54(d) x 1.42(w) x 0.53(h) in. (8.99 x 3.61 x 1.35 cm)
Weight: 0.18 lb. (0.08 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C)
Operating relative humidity: 15% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 1.0 W
Power consumption maximum: 3.3 W

Cabling

Maximum distance:

15m with CX4 cables
300m with optical media converter and multimode fiber cable

Notes

Connector: CX4; Duplex: full

Use CX4 10-GbE cable (0.5-15 m) or ProCurve 10-GbE CX4 Media Converter (J8439A).

For suggested vendors of CX4 cables, please see the "Cabling" answers on the "ProCurve 10-GbE Transceivers" FAQs Web page.

Optical Media Converter (OMC) J8439A is not supported on the C version as the power supply for the OMC was removed in this design.

Compatible products

HP X111 100M SFP LC FX Transceiver (J9054C)

A small form-factor pluggable (SFP) 100Base-FX transceiver that provides 100 Mbps full-duplex connectivity up to 2 km on multimode fiber.

Ports

1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX)
Duplex: half or full

Physical characteristics

Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

2 km (full duplex) or 412 m (half duplex)

Notes

Transmitter wavelength: 1310nm

Power consumption is 1.1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J9054B 100-FX SFP-LC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

Compatible products

HP X131 10G X2 SC LR Transceiver (J8437A)

An X2 form-factor transceiver that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on single-mode fiber.

Ports

1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR)
Duplex: full only

Connectivity

Connector type: SC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm)
Weight: 0.35 lb. (0.16 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32°F to 104°F (0°C to 40°C)
Operating relative humidity: 15% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 2 W
Power consumption maximum: 3 W

Cabling

Cable type:

Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

10 km

Cable length: 2m to 10km with 9/125 µm single-mode cable
Fiber type: Single Mode

Notes

Conditioning patch cord cables are not supported

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X131 10G X2 SC LRM Transceiver (J9144A)

An X2 form-factor transceiver that supports the 10-Gigabit LRM standard, providing 10-Gigabit connectivity up to 220 m on legacy multimode fiber.

Ports

1 SC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM)
Duplex: full only

Physical characteristics

Dimensions: 3.54(d) x 1.59(w) x 0.7(h) in. (9.0 x 4.05 x 1.78 cm)
Weight: 0.35 lb. (0.16 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 3.2 W
Power consumption maximum: 4.2 W

Cabling

Cable type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations)

Maximum distance:

0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km

Cable length: .5m to 220m
Fiber type: Multi Mode

Notes

Wavelength: 1310nm

For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the maximum distances listed above.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J9144A 10-GbE X2-SC LRM Optic" on the "ProCurve 10-GbE Transceivers" Manuals Web page.

Power Consumption: 4W Max

Compatible products

HP X112 100M SFP LC BX-D Transceiver (J9099B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "downstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D)
Duplex: full only

Physical characteristics

Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)
Weight: 0.04 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:

Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.

Power consumption is 1.1 watt maximum.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP ProCurve BX Transceivers" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver can only connect to a 100-BX-U product. You cannot connect two 100-BX-D transceivers together.)

Compatible products

HP X112 100M SFP LC BX-U Transceiver (J9100B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "upstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U)
Duplex: full only

Physical characteristics

Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)
Weight: 0.07 lb. (.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:

Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

0.5-10,000 m (single-mode fiber)

Notes

The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U transceiver can only connect to a 100-BX-D product. You cannot connect two 100-BX-U transceivers together.)

Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.

Power consumption is 1.1 watts maximum.

Compatible products

HP X132 10G SFP+ LC SR Transceiver (J9150A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 m on multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-SR)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.6 W
Power consumption maximum: 0.8 W

Cabling

Cable type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km

Cable length: 2-300m
Fiber type: Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC LR Transceiver (J9151A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on single-mode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (.02 kg)
Transceiver form factor: SFP+

Environment

Electrical characteristics

Power consumption typical: 0.9 W
Power consumption maximum: 1 W

Cabling

Cable type:

Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

2m-10km with 9/125 µm single-mode cable

Cable length: 2m to 10km
Fiber type: Single Mode

Notes

Conditioning patch cord cables are not supported.

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X132 10G SFP+ LC LRM Transceiver (J9152A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LRM standard, for 10-Gigabit connectivity up to 220 m on legacy multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (.02 kg)
Transceiver form factor: SFP+

Environment

Electrical characteristics

Power consumption typical: 0.7 W
Power consumption maximum: 1 W

Cabling

Cable type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations)

Maximum distance:

0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km

Cable length: 0.5m to 220m
Fiber type: Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

Compatible products

HP X121 1G SFP LC LH Transceiver (J4860C)

A small form-factor pluggable (SFP) Gigabit LH (ZX) transceiver that provides a full-duplex Gigabit solution up to 80 km on single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Duplex: full only

Physical characteristics

Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: -40°F to 185°F (-40°C to 85°C)
Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:

Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

10-80,000 m (single-mode fiber)

Fiber type: Single Mode

Notes

Power consumption is 0.8 watts typical with 1 watt maximum at 100% utilization.

For distances less than 20 km, a 10 dB attenuator must be used.

For distances between 20 km and 40 km, a 5 dB attenuator must be used.

Attenuators can be purchased from most cable vendors.

Compatible products

HP X121 1G SFP LC SX Transceiver (J4858C)

A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.

Ports

1 LC 1000BASE-SX port
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W

Cabling

Cable type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

2-220m with 62.5 µm core diameter, 160 MHz*km bandwidth
2-275m with 62.5 µm core diameter, 200 MHz*km bandwidth
2-500m with 50 µm core diameter, 400 MHz*km bandwidth
2-550m with 50 µm core diameter, 500 MHz*km bandwidth

Cable length: 2-550m
Fiber type: Multi Mode

Compatible products

HP X121 1G SFP LC LX Transceiver (J4859C)

A small form-factor pluggable (SFP) Gigabit LX transceiver that provides a full-duplex Gigabit solution up to 10 km (single-mode) or 550 m (multimode).

Ports

1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:

Either single mode or multimode
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively
Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth)
2-10,000 m (single-mode fiber)

Notes

A mode conditioning patch cord may be needed in some multimode fiber installations.

Wavelength: 1310nm

Power Consumption: < 500mW Typical

Compatible products

HP X121 1G SFP RJ45 T Transceiver (J8177C)

A small form-factor pluggable (SFP) Gigabit copper transceiver that provides a full-duplex Gigabit solution up to 100 m on Category 5 or better cable.

Ports

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Duplex: full only

Physical characteristics

Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow over the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Altitude: up to 10,000 ft. (3000 km)

Cabling

Cable type:

1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Maximum distance:

100 m

Notes

Power consumption is nominally 1 watt.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J8177C 1000Base-T Mini-GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J8177C Gigabit copper mini-GBIC is not supported on dual-personality ports.

The J8177C is capable of 100 Mb operation. This is supported on only the HP ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software version K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb operation.

Important: The earlier J8177B does not support 100 Mb operation.

When used in the ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A), the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC port, but will block access to the other port.

Compatible products

HP X122 1G SFP LC BX-D Transceiver (J9142B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "downstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D)
Duplex: full only

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:

Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.

Power consumption is 1 watt maximum.

The J9142B connects to the J9143B "upstream" transceiver, or to any IEEE-standard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D transceiver can only connect to a 1000-BX-U product. You cannot connect two 1000-BX-D transceivers together.)

Compatible products

HP X122 1G SFP LC BX-U Transceiver (J9143B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "upstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U)
Duplex: full only

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Cabling

Cable type:

Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.

The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U transceiver can only connect to a 1000-BX-D product. You cannot connect two 1000-BX-U transceivers together.)

Power consumption is 1 watt maximum.

Compatible products

HP X132 10G SFP+ LC ER Transceiver (J9153A)

HP X132 10G SFP+ LC ER Transceiver: The SFP+ ER transceiver transmits 10Gbps of data up to a 40km distance over single mode fiber cable.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-ER)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

0.55(w) x 2.22(d) x 0.47(h) in (1.39 x 5.65 x 1.19 cm)
Weight: 0.04 lb (0.02 kg), Fully loaded
Transceiver form factor: SFP+

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Power consumption typical: 1.3 W
Power consumption maximum: 1.5 W

Cabling

Cable type:

Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

40km

Fiber type: Single Mode

Notes

Check switch release notes for minimum version of software required to support this transceiver.

Some switches have limits as to how many of this particular transceiver can be installed. See the release notes of the switch software/firmware being used for more details.

This transceiver is supported in 2910al switches with software release W.15.07.0002 or later.

Compatible products

HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable (J9281B)

A low-price 10-Gigabit connectivity option consisting of a 1 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 3.28 ft. (1 m)

Physical characteristics

Weight: .24 lb. (0.11 kg) the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties

Cable Characteristic Impedance: 100 ohms
Crosstalk between pairs: 2% max
Time delay: 1.31 nsec/ft

Physical Properties

Cable Diameter: 0.180"
Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (J9283B)

A low-price 10-Gigabit connectivity option consisting of a 3 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 10 ft. (3 m)

Physical characteristics

Weight: .49 lb. (0.22 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties

Cable Characteristic Impedance: 100 ohms
Crosstalk between pairs: 2% max
Time delay: 1.31 nsec/ft

Physical Properties

Cable Diameter: 0.180"
Minimum Cable Bend Radius: 1.0"

Compatible products

HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable (J9285B)

A low-price 10-Gigabit connectivity option consisting of a 7 m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 22.97 ft. (7 m)

Physical characteristics

Weight: 1.02 lb., Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Electrical characteristics

Notes: 0.04 watts maximum per transceiver end

Notes

Electrical Properties

Cable Characteristic Impedance: 100 ohms
Crosstalk between pairs: 2% max
Time delay: 1.31 nsec/ft

Physical Properties

Cable Diameter: 0.180"
Minimum Cable Bend Radius: 1.0"

Compatible products

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable (J9300A)

A 1m direct attach copper cable with an XFP connector attached on one end and an SFP+ connector attached on the other end. This cable provides a low price connectivity option between switches/servers/storage to interconnect XFP and SFP+ form factors.

Connectivity

Length: 3.28 ft. (1 m)

Physical characteristics

Weight: .27 lb. (0.12 kg), Fully loaded cable with XFP transcevier on one end and SFP+ on the other end

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 32°F to 158°F (0°C to 70°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Notes

XFP end consumes 2 watts SFP+ end consumes 0.036 watts

Compatible products

HP X244 10G XFP to SFP+ 3m Direct Attach Copper Cable (J9301A)

A 3m direct attach copper cable with an XFP connector attached on one end and an SFP+ connector attached on the other end. This cable provides a low price connectivity option between switches/servers/storage to interconnect XFP and SFP+ form factors.

Connectivity

Length: 9.84 ft. (3 m)

Physical characteristics

Weight: .51 lb. (0.23 kg), Fully loaded cable with XFP transcevier on one end and SFP+ on the other end

Environment

Cabling

Maximum distance:

3m Direct Attach Cable

Notes

XFP end consumes 2 watts SFP+ end conumes 0.036 watts

Compatible products

HP X244 10G XFP to SFP+ 5m Direct Attach Copper Cable (J9302A)

A 5m direct attach copper cable with an XFP connector attached on one end and an SFP+ connector attached on the other end. This cable provides a low price connectivity option between switches/servers/storage to interconnect XFP and SFP+ form factors.

Connectivity

Length: 16.4 ft. (5 m)

Physical characteristics

Weight: .74 lb. (0.34 kg), Fully loaded cable with XFP transcevier on one end and SFP+ on the other end

Environment

Notes

XFP end consumes 2 watts SFP+ end conumes 0.036 watts

Compatible products

HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)

HP's Fibre Channel (FC) and 10GbE cables are tested and qualified to provide maximum performance across HP's entire FC/10GbE switches, directors, routers, blade server switches and SAN product families.

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber and designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)

Cabling

Cable type:

50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m

Maximum distance:

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Compatible products

HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable (BK837A)

HP's PremierFlex bend-insensitive fiber optic cables are tested and qualified to provide maximum performance across HP's entire FC and Ethernet product families. http://h30428.www3.hp.com/?fr_story=12f70d1056643c69d0754fe491bd218c3859a2e0&rf=bm

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH) thermoplastic.
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also has a longitudal white stripe that runs the entire length of the cable.
Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46

Compatible products

HP 1 m PremierFlex OM3+ LC/LC Optical Cable (BK838A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 2 m PremierFlex OM3+ LC/LC Optical Cable (BK839A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 5 m PremierFlex OM3+ LC/LC Optical Cable (BK840A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 15 m PremierFlex OM3+ LC/LC Optical Cable (BK841A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 30 m PremierFlex OM3+ LC/LC Optical Cable (BK842A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP 50 m PremierFlex OM3+ LC/LC Optical Cable (BK843A)

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45

Compatible products

HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable (J9286B)

A low-price 10-Gigabit connectivity option consisting of a 10m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 32.82 ft. (10 m)

Physical characteristics

15(w) x 12(d) x 3(h) in (38.1 x 30.48 x 7.62 cm)
Weight: 0.99 lb (0.45 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Operating temperature: 23°F to 185°F (-5°C to 85°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: 14°F to 185°F (-10°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Altitude: up to 10,000 ft (3 km)

Electrical characteristics

Maximum power rating: 1.2 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
0.6 watts maximum per transceiver end

Notes

Electrical Properties:

Cable Characteristic Impedance: 100 ohms

Physical Properties:

Cable Diameter: 0.185"
Minimum Cable Bend Radius: .555"

This cables is supported on 2910al switches with W.15.07.0002 or later software.

Compatible products

HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable (J9287B)

A low-price 10-Gigabit connectivity option consisting of a 15m cable with SFP+ connectors permanently attached to each end.

Connectivity

Length: 49.20 ft. (15 m)

Physical characteristics

15(w) x 12(d) x 3(h) in (38.1 x 30.48 x 7.62 cm)
Weight: 1.74 lb (0.79 kg), Fully loaded the cable with an SFP+ transceiver at each end of the cable

Environment

Electrical characteristics

Notes

Electrical Properties:

Cable Characteristic Impedance: 100 ohms

Physical Properties:

Cable Diameter: 0.255"
Minimum Cable Bend Radius: 0.765"

This cable is supported on 2910al switches with W.15.07.002 or later software.

Compatible products

HP 1500W PoE+ zl Power Supply (J9306A)

Standard PoE+ power supply for E5400/E8200 series zl switches. Supplies 300W for PoE+ power at 110-127 volts, 900W for PoE+ power at 200-240 volts, and 600 W for switch power.

Physical characteristics

Dimensions: 6.05(d) x 7.45(w) x 5.1(h) in. (15.37 x 18.92 x 12.95 cm)
Weight: 7.5 lb. (3.2 kg)

Environment

Electrical characteristics

Voltage: 110-127/200-240 VAC
Current: 13/10 A
Maximum power rating: 1768 W
Frequency: 50/60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
The Maximum Power Rating at 120 volts is 1114 watts and at 240 volts is 1768 watts.

Notes

Each J9306A supplies 600 W chassis power, 300 W of PoE/PoE+ power at 110-127 volts, and 900 W of PoE/PoE+ power at 200-240 volts.

One J9306A can power the J8697A chassis.

One J9306A can power the J9477A chassis.

Two J9306A supplies are required to power the J8698A chassis.

Two J9306A supplies are required to power the J8715A chassis.

Compatible products

HP 1500W zl Power Supply (J8713A)

High-power 1500 W power supply for E Series zl switches. Supplies 900 W for PoE power plus 600 W for switch power. 200–240 V only.

Physical characteristics

Dimensions: 6.05(d) x 7.45(w) x 5.1(h) in. (15.37 x 18.92 x 12.95 cm)
Weight: 7.5 lb. (3.4 kg)

Environment

Operating temperature: 32°F to 131°F (0°C to 55°C)
Operating relative humidity: 15% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Voltage: 200-240 VAC
Current: 10 A
Maximum power rating: 1800 W
Frequency: 50/60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Notes

200–240 V only. Installation of the J8713A reduces the chassis altitude specification to 10,000 ft. (3677m).

J8713A supplies 600 W chassis power and 900 W PoE power.

See the Ordering Guide for more details on power supply selection for PoE power.

Units shipped to North America include a NEMA L6-20P twist lock power cord. Non-locking NEMA 6-20P optionally available - see the Ordering Guide for more details.

When used in the J8714A power shelf, the following specs apply (at full load):

Heat dissipation: 450 BTU/hr (475 kJ/hr) @ 220V
Maximum current: 5.1 A @ 220 V

Compatible products

HP 875W zl Power Supply (J8712A)

Standard 875 W power supply for zl series switches. Supplies 273 W for PoE power and 600 W for switch power.

Physical characteristics

Dimensions: 6.05(d) x 7.45(w) x 5.1(h) in. (15.37 x 18.92 x 12.95 cm)
Weight: 7.05 lb. (3.2 kg)

Environment

Electrical characteristics

Voltage: 100-127/200-240 VAC
Current: 12/5.7 A
Maximum power rating: 1050 W
Frequency: 50/60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Notes

J8712A supplies 600 W chassis power and 273 W PoE power.

One J8712A can power the J8697A chassis.

Two J8712A supplies are required to power the J8698A chassis.

Two J8712A supplies are required to power the J8715A chassis.

See the Ordering Guide for more details on power supply selection for PoE power.

When used in the J8714A power shelf, the following specs apply (at full load):

Heat dissipation: 250 BTU/hr (263 kJ/hr) @ 110 V, 210 BTU/hr (222 kJ/hr) @ 220 V
Maximum current: 3.2 A @ 110 V, 1.7 A @ 220 V

Compatible products

HP 8200 zl Switch Premium License (J9474A)

HP 8200 zl Switch Premium License adds advanced features such as BGP-4, OSFPv2/v3, PIM-DM, PIM-SM, VRRP, and QinQ to the HP 8200 zl Series Switches that do not have integrated license

This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

»HP 8200 zl Switch Series

HP 8206 zl Switch Fan Tray (J9476A)

HP E8206 zl Switch Fan Tray: For onsite sparing only ( Base System comes with one required fan tray).

Physical characteristics

Dimensions: 18.23(d) x 1.96(w) x 10.15(h) in. (46.3 x 4.98 x 25.78 cm) (6U height)
Weight: 3.46 lb. (1.57 kg)

Compatible products

HP 8212 zl Fan Tray (J9094A)

HP E8212 Switch zl Fan Tray. Ordered by customers for onsite sparing only (base system comes with required fan tray).

Physical characteristics

Dimensions: 5(d) x 5(w) x 5(h) in. (12.7 x 12.7 x 12.7 cm)

Compatible products

HP 8200 zl Switch Series

Modules
Transceivers
Cables

Power Supply
License
Additional accessories

Modules

HP 8-port 10GBASE-T v2 zl Module (J9546A)
HP 8-port 10GbE SFP+ v2 zl Module (J9538A)
HP 4-port 10GbE CX4 zl Module (J8708A)
HP 4-port 10GbE X2 zl Module (J8707A)
HP 4-port 10GbE SFP+ zl Module (J9309A)
HP 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A)
HP 20-port Gig-T / 2-port 10GbE SFP+ v2 zl Module (J9548A)
HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module (J9535A)
HP 20-port Gig-T / 4-port SFP v2 zl Module (J9549A)
HP 24-port SFP v2 zl Module (J9537A)
HP 12-port Gig-T PoE+ / 12-port SFP v2 zl Module (J9637A)
HP 24-port Gig-T PoE+ v2 zl Module (J9534A)
HP 24-port Gig-T v2 zl Module (J9550A)
HP 24-port 10/100/1000 PoE zl Module (J8702A)
HP 20-port Gig-T / 4-port Mini-GBIC zl Module (J8705A)
HP 24-port Mini-GBIC zl Module (J8706A)
HP 24-port 10/100 PoE+ v2 zl Module (J9547A)
HP 24-port 10/100 PoE+ zl Module (J9478A)
HP 24-port 10/100/1000 PoE+ zl Module (J9307A)
HP 20-port 10/100/1000 PoE+ / 4-port Mini-GBIC zl Module (J9308A)
HP 8200 zl System Support Module (J9095A)
HP 8200 zl Management Module (J9092A)
HP 8200 zl Fabric Module (J9093A)
HP Survivable Branch Communication zl Module powered by MicrosoftÂ® Lync (J9485A)
HP Services zl Module for Avaya Aura Session Border Controller powered by Acme Packet (J9486A)
HP Threat Management Services zl Module with 1-year IPS Subscription Service (J9156A)
HP Threat Management Services zl Module (J9155A)
HP Services zl Module (J9289A)
HP Advanced Services zl Module (J9483A)
HP Advanced Services zl Module with Microsoft Windows Server 2008 R2 Standard (J9666A)
HP Advanced Services zl Module with Citrix XenServer platform (J9747A)
HP Advanced Services zl Module with VMware vSphere Platform (J9748A)

Transceivers

HP X131 10G X2 SC ER Transceiver (J8438A)
HP X131 10G X2 SC SR Transceiver (J8436A)
HP X131 10G X2 CX4 Transceiver (J8440C)
HP X111 100M SFP LC FX Transceiver (J9054C)
HP X131 10G X2 SC LR Transceiver (J8437A)
HP X131 10G X2 SC LRM Transceiver (J9144A)
HP X112 100M SFP LC BX-D Transceiver (J9099B)
HP X112 100M SFP LC BX-U Transceiver (J9100B)
HP X132 10G SFP+ LC SR Transceiver (J9150A)
HP X132 10G SFP+ LC LR Transceiver (J9151A)
HP X132 10G SFP+ LC LRM Transceiver (J9152A)
HP X121 1G SFP LC LH Transceiver (J4860C)

HP X121 1G SFP LC SX Transceiver (J4858C)
HP X121 1G SFP LC LX Transceiver (J4859C)
HP X121 1G SFP RJ45 T Transceiver (J8177C)
HP X122 1G SFP LC BX-D Transceiver (J9142B)
HP X122 1G SFP LC BX-U Transceiver (J9143B)
HP X132 10G SFP+ LC ER Transceiver (J9153A)

Cables

HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable (J9281B)
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (J9283B)
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable (J9285B)
HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable (J9300A)
HP X244 10G XFP to SFP+ 3m Direct Attach Copper Cable (J9301A)
HP X244 10G XFP to SFP+ 5m Direct Attach Copper Cable (J9302A)
HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)
HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)
HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)
HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)
HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)
HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)
HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)
HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable (BK837A)
HP 1 m PremierFlex OM3+ LC/LC Optical Cable (BK838A)
HP 2 m PremierFlex OM3+ LC/LC Optical Cable (BK839A)
HP 5 m PremierFlex OM3+ LC/LC Optical Cable (BK840A)
HP 15 m PremierFlex OM3+ LC/LC Optical Cable (BK841A)
HP 30 m PremierFlex OM3+ LC/LC Optical Cable (BK842A)
HP 50 m PremierFlex OM3+ LC/LC Optical Cable (BK843A)
HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable (J9286B)
HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable (J9287B)

Power Supply

HP 1500W PoE+ zl Power Supply (J9306A)
HP 1500W zl Power Supply (J8713A)
HP 875W zl Power Supply (J8712A)

License

HP 8200 zl Switch Premium License (J9474A)

Additional accessories

HP 8206 zl Switch with Premium Software (J9640A) accessories

HP 20-port Gig-T / 4-port SFP v2 zl Module (J9549A)
HP 8206 zl Switch Fan Tray (J9476A)

HP 8212 zl Switch with Premium Software (J9641A) accessories

HP 8212 zl Fan Tray (J9094A)

HP 8206-44G-PoE+-2XG v2 zl Switch with Premium Software (J9638A) accessories

HP 20-port Gig-T / 4-port SFP v2 zl Module (J9549A)
HP 8206 zl Switch Fan Tray (J9476A)

HP 8212-92G-PoE+-2XG v2 zl Switch with Premium Software (J9639A) accessories

HP 8212 zl Fan Tray (J9094A)

HP 8200 zl Switch Series

HP Care Packs for HP Networking
Services
Additional Support and Services

HP Care Packs for HP Networking

HP 8206 zl Switch with Premium Software

3-year, 4-hour onsite, 13x5 coverage for hardware (UW442E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW443E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW444E)
3-year, 24x7 SW phone support, software updates (UW445E)
Installation with minimum configuration, system-based pricing (U4828E)
Installation with HP-provided configuration, system-based pricing (U4832E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UW462E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW463E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW464E)
4-year, 24x7 SW phone support, software updates (UW465E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UY921E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UY922E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UY923E)
5-year, 24x7 SW phone support, software updates (UY924E)
3 Yr 6 hr Call-to-Repair Onsite (UW446E)
4 Yr 6 hr Call-to-Repair Onsite (UW466E)
5 Yr 6 hr Call-to-Repair Onsite (UY925E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR609E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR610E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR613E)
1-year, 24x7 software phone support, software updates (HR612E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR611E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS762E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS763E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS764E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS765E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS766E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS767E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS768E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS769E)

HP 8212 zl Switch with Premium Software

3-year, 4-hour onsite, 13x5 coverage for hardware (UW447E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW448E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW449E)
3-year, 24x7 SW phone support, software updates (UW450E)
Installation with minimum configuration, system-based pricing (U4828E)
Installation with HP-provided configuration, system-based pricing (U4832E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UW467E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW468E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW469E)
4-year, 24x7 SW phone support, software updates (UW471E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UY926E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UY927E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UY928E)
5-year, 24x7 SW phone support, software updates (UY929E)
3 Yr 6 hr Call-to-Repair Onsite (UY937E)
4 Yr 6 hr Call-to-Repair Onsite (UW472E)
5 Yr 6 hr Call-to-Repair Onsite (UY930E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR614E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR615E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR618E)
1-year, 24x7 software phone support, software updates (HR617E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR616E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS754E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS755E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS756E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS757E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS758E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS759E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS760E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS761E)

HP 8206-44G-PoE+-2XG v2 zl Switch with Premium Software

3-year, 4-hour onsite, 13x5 coverage for hardware (UW442E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW443E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW444E)
3-year, 24x7 SW phone support, software updates (UW445E)
Installation with minimum configuration, system-based pricing (U4828E)
Installation with HP-provided configuration, system-based pricing (U4832E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UW462E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW463E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW464E)
4-year, 24x7 SW phone support, software updates (UW465E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UY921E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UY922E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UY923E)
5-year, 24x7 SW phone support, software updates (UY924E)
3 Yr 6 hr Call-to-Repair Onsite (UW446E)
4 Yr 6 hr Call-to-Repair Onsite (UW466E)
5 Yr 6 hr Call-to-Repair Onsite (UY925E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR609E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR610E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR613E)
1-year, 24x7 software phone support, software updates (HR612E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR611E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS762E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS763E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS764E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS765E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS766E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS767E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS768E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS769E)

HP 8212-92G-PoE+-2XG v2 zl Switch with Premium Software

3-year, 4-hour onsite, 13x5 coverage for hardware (UW447E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW448E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW449E)
3-year, 24x7 SW phone support, software updates (UW450E)
Installation with minimum configuration, system-based pricing (U4828E)
Installation with HP-provided configuration, system-based pricing (U4832E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UW467E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW468E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW469E)
4-year, 24x7 SW phone support, software updates (UW471E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UY926E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UY927E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UY928E)
5-year, 24x7 SW phone support, software updates (UY929E)
3 Yr 6 hr Call-to-Repair Onsite (UY937E)
4 Yr 6 hr Call-to-Repair Onsite (UW472E)
5 Yr 6 hr Call-to-Repair Onsite (UY930E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR614E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR615E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR618E)
1-year, 24x7 software phone support, software updates (HR617E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR616E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS754E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS755E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS756E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS757E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS758E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS759E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS760E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS761E)

HP Networking Services

Services that add value to your business

The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

Additional Support and Services

To get more details about the HP Services available in your country, please visit Networking Services

Please check the availability of these service in your respective countries.

Resources

Business Documentation
Technical Documentation

[+] Show Selections

Loading Collateral...

Couldn't find what you were looking for?

Send us feedback