javascript for metrics for North America HP Networking
5830 Switch Series
close

HP 5830 Switch Series

Product overview

The HP 5830AF Switch Series is a family of high-density 1 GbE top-of-rack data center and campus switches that are a part of the HP FlexFabric solution module of the HP FlexNetwork architecture. The two models, the 5830AF-48G and 5830AF-96G switches, are ideally suited for deployments at the server access layer in medium-sized and large enterprise data centers and campus networks. The HP 5830AF-48G Switch delivers 48 1-GbE ports and up to four 10-GbE ports in a space-saving 1RU package, while the HP 5830AF-96G Switch provides an industry-leading 96 1-GbE ports and up to 10 10-GbE uplink ports in a 2RU form factor.
  • Stackable, high port density for high scalability
  • HP IRF technology for simpler two-tier networks
  • Ultradeep (1 Gb and 3 GB) packet buffers
  • Full L2/L3 features, IPv4 and IPv6 dual stack
  • Lower OpEx and greener data centers

Quality of Service (QoS)

  • Traffic policing — supports Committed Access Rate (CAR) and line rate
  • Powerful QoS feature — creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, DSCP, or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), SP+WRR, and SP+WFQ
» Back to top

Management

  • sFlow (RFC 3176) — provides scalable ASIC-based wire-speed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
  • Remote configuration and management — is available through a secure Web browser or a command-line interface (CLI)
  • Manager and operator privilege levels — enable read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
  • Management VLAN — segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and SNMP
  • Multiple configuration files — can be stored to the flash image
  • Secure Web GUI — provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
  • SNMPv1, v2c, and v3 — facilitate centralized discovery, monitoring, and secure management of networking devices
  • Remote monitoring (RMON) — uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group
  • Network Time Protocol (NTP) — synchronizes timekeeping among distributed time servers and clients; keeps consistent timekeeping among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time
  • Out-of band-interface — isolates management traffic from user data plane traffic for complete isolation and total reachability, no matter what happens in the data plane
  • Remote intelligent mirroring — mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote 8200, 6600, 6200, 5400, or 3500 switch port anywhere on the network
» Back to top

Connectivity

  • Jumbo frames — on Gigabit Ethernet and 10-Gigabit ports, they allow high-performance remote backup and disaster recovery services
  • Auto-MDIX — automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
  • IPv6 native support —
    • IPv6 host — enables switches to be managed and deployed at the IPv6 network's edge
    • Dual stack (IPv4 & IPv6) — transitions from IPv4 to IPv6, supporting connectivity for both protocols
    • Multicast Listener Discovery (MLD) snooping — IPv6 multicast traffic to the appropriate interface
    • IPv6 ACL/QoS — supports ACL and QoS for IPv6 network traffic, preventing traffic flooding
    • IPv6 routing — supports IPv6 static routes, RIP,BGP4+v6, IS-ISv6 and OSPF routing protocols
» Back to top

Performance

  • Extraordinarily high port density — is a single box-type switch that can provide 96 GbE ports and 10 10-GbE ports simultaneously with full line-rate switching and forwarding
  • Ultradeep packet buffering — provides up to a 3G packet buffer to eliminate network congestion at the I/O associated with heavy use of server virtualization, as well as bursty multimedia, storage applications, and other critical services.
  • Hardware-based wire-speed access control lists (ACLs) — feature-rich ACL implementation (TCAM-based) helps ensure high levels of security and ease of administration without impacting network performance
  • Local Address Resolution Protocol (ARP) — ARP fast reply feature provides an outstanding utilization of air-interface resources by first issuing an ARP request locally before the AP broadcasts over the radio interface
» Back to top

Resiliency and high availability

  • Device Link Detection Protocol (DLDP) — monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STP-based networks
  • Virtual Router Redundancy Protocol (VRRP) — allows groups of two routers to dynamically back each other up to create highly available routed environments
  • Intelligent Resilient Framework (IRF) — creates virtual resilient switching fabrics, where two or more switches perform as a single Layer 2 switch and Layer 3 router; switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; simplifies network operation by eliminating the complexity of Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP
  • Rapid Ring Protection Protocol (RRPP) — connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the ring in less than 200 ms, reducing the impact on traffic and applications
  • Smart link — allows 200 ms failover between links
  • Data center optimized design — supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans
» Back to top

Manageability

  • Troubleshooting — ingress and egress port monitoring enable network problem solving
» Back to top

Layer 2 switching

  • Spanning Tree/MSTP and RSTP — prevent network loops
  • Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping — effectively control and manage the flooding of multicast packets in a Layer 2 network
  • 32K MAC addresses — provide access to many Layer 2 devices
  • IEEE 802.1ad QinQ and Selective QinQ — increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network
  • 10 GbE port aggregation — allows grouping of ports to increase overall data throughput to a remote device
  • Port isolation — increases security by isolating ports within a VLAN while still allowing them to communicate with other VLANs
  • Per-VLAN Spanning Tree Plus (PVST+) — allows each virtual LAN (VLAN) to build a separate spanning tree to improve link bandwidth usage in network environments where multiple VLANs exist
  • GVRP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
» Back to top

Layer 3 services

  • Loopback interface address — defines an address in Routing Information Protocol (RIP) and OSPF that can always be reachable, improving diagnostic capability
  • User Datagram Protocol (UDP) helper function — allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
  • Route maps — provide more control during route redistribution; allow filtering and altering of route metrics
  • Dynamic Host Configuration Protocol (DHCP) — simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets
» Back to top

Layer 3 routing

  • IPv6 tunneling — is an important element for the transition from IPv4 to IPv6; allows IPv6 packets to traverse IPv4-only networks by encapsulating the IPv6 packet into a standard IPv4 packet; supports manually configured, 6to4, and Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnels
  • Bidirectional Forwarding Detection (BFD) — enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, and IRF
  • Policy-based routing — makes routing decisions based on policies set by the network administrator
  • IGMPv1, v2, and v3 — allow individual hosts to be registered on a particular VLAN
  • PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6) — support IP Multicast address management and inhibition of DoS attacks
  • Layer 3 IPv4 routing — provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, IS-IS, and BGP
  • Equal-Cost Multipath (ECMP) — enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
  • Layer 3 IPv6 routing — provides routing of IPv6 at media speed; supports static routes, RIPng, OSPFv3, IS-ISv6, and MP-BGP
» Back to top

Security

  • Access control lists (ACLs) — provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number
  • Secure Shell — encrypts all transmitted data for secure remote CLI access over IP networks
  • Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
  • Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
  • Secure management access — securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
  • Identity-driven security and access control —
    • Per-user ACLs — permits or denies user access to specific network resources based on user identity, location, and time of day, allowing multiple types of users on the same network to access specific network services without risk to network security or unauthorized access to sensitive data
    • Automatic VLAN assignment — automatically assigns users to the appropriate VLAN based on their identity and location, and the time of day
  • STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
  • DHCP protection — blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
  • Dynamic ARP protection — blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
  • STP Root Guard — protects the root bridge from malicious attacks or configuration mistakes
  • Guest VLAN — similar to IEEE 802.1X, it provides a browser-based environment to authenticated clients
  • MAC-based authentication — allows or denies access to the switch based on a client MAC address
  • IP Source Guard — helps prevent IP spoofing attacks
  • Endpoint Admission Defense (EAD) — provides security policies to users accessing a network
  • RADIUS/HWTACACS — eases switch management security administration by using a password authentication server
» Back to top

Convergence

  • IP multicast snooping (data-driven IGMP) — automatically prevents flooding of IP multicast traffic
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — is an automated device discovery protocol that provides easy mapping of network management applications
  • Internet Group Management Protocol (IGMP) — is used by IP hosts to establish and maintain multicast groups; supports IGMPv1, v2, and v3; utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks
  • Protocol Independent Multicast (PIM) — is used for IPv4 and IPv6 multicast applications; supports PIM Dense Mode (PIM-DM), Sparse Mode (PIM-SM), and Source-Specific Mode (PIM-SSM)
  • Multicast Source Discovery Protocol (MSDP) — is used for inter-domain multicast applications, allowing multiple PIM-SM domains to interoperate
  • Multicast Border Gateway Protocol (MBGP) — allows multicast traffic to be forwarded across BGP networks and kept separate from unicast traffic
  • Multicast VLAN — allows multiple VLANs to receive the same IPv4 or IPv6 multicast traffic, reducing network bandwidth demand by eliminating multiple streams to each VLAN
  • LLDP-MED — is a standard extension that automatically configures network devices, including LLDP-capable IP phones
  • LLDP-CDP compatibility — receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
» Back to top

Monitor and diagnostics

  • Port mirroring — enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
  • OAM (802.3ah) — detects data link layer problems that occurred in the "last mile"; monitors the status of the link between the two devices
  • CFD (802.1ag) — connectivity fault detection (CFD) provides a Layer 2 link OAM (operations, administration, and maintenance) mechanism used for link connectivity detection and fault locating
» Back to top

Additional information

  • Green initiative support — provides support for RoHS and WEEE regulations
  • Green IT and power — use the latest advances in silicon development, shut off unused ports, and use variable-speed fans to improve energy efficiency
» Back to top

Warranty and support

» Back to top

HP 5830 Switch Series

General specifications

HP 5830AF-48G Switch with 1 Interface Slot (JC691A) HP 5830AF-96G Switch (JC694A)
Ports
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

2 dual-personality ports

auto-sensing 10/100/1000Base-T or SFP

2 fixed 1000/10000 SFP+ ports

1 RJ-45 serial console port

1 RJ-45 out-of-band management port

1 extended module slot

 96 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

10 fixed 1000/10000 SFP+ ports

1 RJ-45 serial console port

1 RJ-45 out-of-band management port
Power supplies
2 power supply slots

1 minimum power supply required (ordered separately)

 2 power supply slots

1 minimum power supply required (ordered separately)
Fan tray
1 fan tray slot 1 fan tray slot
Physical characteristics
17.32(w) x 18.11(d) x 1.72(h) in (43.99 x 46 x 4.37 cm) (1U height) 17.32(w) x 25.98(d) x 3.39(h) in (43.99 x 65.99 x 8.61 cm)
Weight 14.53 lb (6.59 kg) 31.75 lb (14.4 kg)
Memory and processor
64 MB flash, 1 GB SDRAM; packet buffer size: 1 GB 64 MB flash, 1 GB SDRAM; packet buffer size: 3 GB
Performance
Throughput 119 million pps (64-byte packets) 291.6 million pps (64-byte packets)
Switching capacity 160 Gbps 392 Gbps
Routing table size 12000 entries 12000 entries
MAC address table size 32000 entries 32000 entries
Environment
Operating temperature 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C)
Operating relative humidity 5% to 95% 5% to 95%
Acoustic Low-speed fan: 58 dB, High-speed fan: 65 dB Low-speed fan: 58 dB, High-speed fan: 65 dB
Electrical characteristics
Maximum heat dissipation 440 BTU/hr (464.2 kJ/hr) 1209 BTU/hr (1275.49 kJ/hr)
Voltage 100-240 VAC 100-240 VAC
DC voltage -40 to -60 VDC -40 to -60 VDC
Frequency 50/60 Hz 50/60 Hz
Safety
UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1AnatelULARGOSTEN 60950-1/A11FDA 21 CFR Subchapter JNOMROHS Compliance UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1AnatelULARGOSTEN 60950-1/A11FDA 21 CFR Subchapter JNOMROHS Compliance
Notes
Additional specifications
  • Static MAC table: 5120
  • Max VLAN interface: 1,000
  • Multicast L2 entries for IPv4: 2,000
  • Multicast L2 entries for IPv6: 1,000
  • Multicast L3 entries for IPv4: 2,000
  • Multicast L3 entries for IPv6: 1,000
  • VLAN table: 4,000
  • QoS forward queue number: 8
  • Static ARP number: 1,000
  • Dynamic ARP number: 8,000
  • MAX number in one link group: 8
  • Link group number: 128
  • ACL number: 4,000 (ingress); 512 (egress)


 Additional specifications
  • Static MAC table: 5120
  • Max VLAN interface: 1,000
  • Multicast L2 entries for IPv4: 2,000
  • Multicast L2 entries for IPv6: 1,000
  • Multicast L3 entries for IPv4: 2,000
  • Multicast L3 entries for IPv6: 1,000
  • VLAN table: 4,000
  • QoS forward queue number: 8
  • Static ARP number: 1,000
  • Dynamic ARP number: 8,000
  • MAX number in one link group: 8
  • Link group number: 128
  • ACL number (GbE ports): 8,000 (ingress); 1,000 (egress)
  • ACL number(10 GbE ports): 2,000 (ingress); 512 (egress)
» Back to top

Emissions

VCCI Class A; EN 55022 Class A; ICES-003 Class A; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EMC Directive 2004/108/EC; EN 55024:1998+ A1:2001 + A2:2003; FCC (CFR 47, Part 15) Subpart B Class A

» Back to top

Immunity

Generic: ETSI EN 300 386 V1.3.3

EN: EN 55024:1998+ A1:2001 + A2:2003

ESD: EN 61000-4-2; IEC 61000-4-2

Radiated: EN 61000-4-3; IEC 61000-4-3

EFT/Burst: EN 61000-4-4; IEC 61000-4-4

Surge: EN 61000-4-5; IEC 61000-4-5

Conducted: EN 61000-4-6; IEC 61000-4-6

Power frequency magnetic field: IEC 61000-4-8; IEC 61000-4-8

Voltage dips and interruptions: EN 61000-4-11; IEC 61000-4-11

Harmonics: EN 61000-3-2, IEC 61000-3-2

Flicker: EN 61000-3-3, IEC 61000-3-3

» Back to top

Management

IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management; SNMP Manager; Telnet; RMON1; FTP; IEEE 802.3 Ethernet MIB

» Back to top

Standards and protocols

BGP
  • RFC 1771 BGPv4
  • RFC 1772 Application of the BGP
  • RFC 1965 BGP4 confederations
  • RFC 1997 BGP Communities Attribute
  • RFC 1998 PPP Gandalf FZA Compression Protocol
  • RFC 2385 BGP Session Protection via TCP MD5
  • RFC 2439 BGP Route Flap Damping
  • RFC 2796 BGP Route Reflection
  • RFC 2858 BGP-4 Multi-Protocol Extensions
  • RFC 2918 Route Refresh Capability
  • RFC 3065 Autonomous System Confederations for BGP
  • RFC 3392 Capabilities Advertisement with BGP-4
  • RFC 4271 A Border Gateway Protocol 4 (BGP-4)
  • RFC 4272 BGP Security Vulnerabilities Analysis
  • RFC 4273 Definitions of Managed Objects for BGP-4
  • RFC 4274 BGP-4 Protocol Analysis
  • RFC 4275 BGP-4 MIB Implementation Survey
  • RFC 4276 BGP-4 Implementation Report
  • RFC 4277 Experience with the BGP-4 Protocol
  • RFC 4360 BGP Extended Communities Attribute
  • RFC 4456 BGP Route Reflection: An Alternative to Full Mesh Internal BGP (IBGP)
  • RFC 5291 Outbound Route Filtering Capability for BGP-4
  • RFC 5292 Address-Prefix-Based Outbound Route Filter for BGP-4
Denial of service protection
  • RFC 2267 Network Ingress Filtering
  • Automatic filtering of well-known denial-of-service packets
  • CPU DoS Protection
  • Rate Limiting by ACLs
Device management
  • RFC 1157 SNMPv1/v2c
  • RFC 1305 NTPv3
  • RFC 1902 (SNMPv2)
  • RFC 2271 FrameWork
  • RFC 2579 (SMIv2 Text Conventions)
  • RFC 2580 (SMIv2 Conformance)
  • RFC 2819 (RMON groups Alarm, Event, History and Statistics only)
  • HTTP, SSHv1, and Telnet
  • Multiple Configuration Files
  • Multiple Software Images
  • SSHv1/SSHv2 Secure Shell
  • TACACS/TACACS+
  • Web UI
General protocols
  • IEEE 802.1ad Q-in-Q
  • IEEE 802.1ag Service Layer OAM
  • IEEE 802.1p Priority
  • IEEE 802.1Q VLANs
  • IEEE 802.1s Multiple Spanning Trees
  • IEEE 802.1w Rapid Reconfiguration of Spanning Tree
  • IEEE 802.1X PAE
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3ac (VLAN Tagging Extension)
  • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • IEEE 802.3ae 10-Gigabit Ethernet
  • IEEE 802.3at
  • IEEE 802.3u 100BASE-X
  • IEEE 802.3x Flow Control
  • IEEE 802.3z 1000BASE-X
  • RFC 768 UDP
  • RFC 783 TFTP Protocol (revision 2)
  • RFC 791 IP
  • RFC 792 ICMP
  • RFC 793 TCP
  • RFC 826 ARP
  • RFC 854 TELNET
  • RFC 894 IP over Ethernet
  • RFC 903 RARP
  • RFC 906 TFTP Bootstrap
  • RFC 925 Multi-LAN Address Resolution
  • RFC 950 Internet Standard Subnetting Procedure
  • RFC 951 BOOTP
  • RFC 959 File Transfer Protocol (FTP)
  • RFC 1027 Proxy ARP
  • RFC 1035 Domain Implementation and Specification
  • RFC 1042 IP Datagrams
  • RFC 1058 RIPv1
  • RFC 1142 OSI IS-IS Intra-domain Routing Protocol
  • RFC 1213 Management Information Base for Network Management of TCP/IP-based internets
  • RFC 1256 ICMP Router Discovery Protocol (IRDP)
  • RFC 1293 Inverse Address Resolution Protocol
  • RFC 1305 NTPv3
  • RFC 1350 TFTP Protocol (revision 2)
  • RFC 1393 Traceroute Using an IP Option
  • RFC 1519 CIDR
  • RFC 1531 Dynamic Host Configuration Protocol
  • RFC 1533 DHCP Options and BOOTP Vendor Extensions
  • RFC 1591 DNS (client only)
  • RFC 1624 Incremental Internet Checksum
  • RFC 1701 Generic Routing Encapsulation
  • RFC 1721 RIP-2 Analysis
  • RFC 1723 RIP v2
  • RFC 1812 IPv4 Routing
  • RFC 2091 Trigger RIP
  • RFC 2131 DHCP
  • RFC 2138 Remote Authentication Dial In User Service (RADIUS)
  • RFC 2453 RIPv2
  • RFC 2644 Directed Broadcast Control
  • RFC 2763 Dynamic Name-to-System ID mapping
  • RFC 2784 Generic Routing Encapsulation (GRE)
  • RFC 2865 Remote Authentication Dial In User Service (RADIUS)
  • RFC 2966 Domain-wide Prefix Distribution with Two-Level IS-IS
  • RFC 2973 IS-IS Mesh Groups
  • RFC 3277 IS-IS Transient Blackhole Avoidance
  • RFC 3567 Intermediate System to Intermediate System (IS-IS) Cryptographic Authentication
  • RFC 3719 Recommendations for Interoperable Networks using Intermediate System to Intermediate System (IS-IS)
  • RFC 3784 ISIS TE support
  • RFC 3786 Extending the Number of IS-IS LSP Fragments Beyond the 256 Limit
  • RFC 3787 Recommendations for Interoperable IP Networks using Intermediate System to Intermediate System (IS-IS)
  • RFC 3847 Restart signaling for IS-IS
  • RFC 4251 The Secure Shell (SSH) Protocol Architecture
  • RFC 5130 A Policy Control Mechanism in IS-IS Using Administrative Tags
IP multicast
  • RFC 2236 IGMPv2
  • RFC 2283 Multiprotocol Extensions for BGP-4
  • RFC 2362 PIM Sparse Mode (Premium Edge License)
  • RFC 3376 IGMPv3
  • RFC 3446 Anycast Rendezvous Point (RP) mechanism using Protocol Independent Multicast (PIM) and Multicast Source Discovery Protocol (MSDP)
  • RFC 3618 Multicast Source Discovery Protocol (MSDP)
  • RFC 3973 PIM Dense Mode
  • RFC 4541 Considerations for Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Snooping Switches
  • RFC 4601 Draft 10 PIM Sparse Mode
  • RFC 4604 Using Internet Group Management Protocol Version 3 (IGMPv3) and Multicast Listener Discovery Protocol Version 2 (MLDv2) for Source-Specific Multicast
  • RFC 4605 IGMP/MLD Proxying
  • RFC 4607 Source-Specific Multicast for IP
  • RFC 4610 Anycast-RP Using Protocol Independent Multicast (PIM)
  • RFC 5059 Bootstrap Router (BSR) Mechanism for Protocol Independent Multicast (PIM)
IPv6
  • RFC 1886 DNS Extension for IPv6
  • RFC 1887 IPv6 Unicast Address Allocation Architecture
  • RFC 1981 IPv6 Path MTU Discovery
  • RFC 2080 RIPng for IPv6
  • RFC 2081 RIPng Protocol Applicability Statement
  • RFC 2292 Advanced Sockets API for IPv6
  • RFC 2373 IPv6 Addressing Architecture
  • RFC 2375 IPv6 Multicast Address Assignments
  • RFC 2460 IPv6 Specification
  • RFC 2461 IPv6 Neighbor Discovery
  • RFC 2462 IPv6 Stateless Address Auto-configuration
  • RFC 2463 ICMPv6
  • RFC 2464 Transmission of IPv6 over Ethernet Networks
  • RFC 2473 Generic Packet Tunneling in IPv6
  • RFC 2526 Reserved IPv6 Subnet Anycast Addresses
  • RFC 2529 Transmission of IPv6 Packets over IPv4
  • RFC 2545 Use of MP-BGP-4 for IPv6
  • RFC 2553 Basic Socket Interface Extensions for IPv6
  • RFC 2710 Multicast Listener Discovery (MLD) for IPv6
  • RFC 2740 OSPFv3 for IPv6
  • RFC 2767 Dual stacks IPv46 & IPv6
  • RFC 2893 Transition Mechanisms for IPv6 Hosts and Routers
  • RFC 3056 Connection of IPv6 Domains via IPv4 Clouds
  • RFC 3307 IPv6 Multicast Address Allocation
  • RFC 3315 DHCPv6 (client and relay)
  • RFC 3484 Default Address Selection for IPv6
  • RFC 3513 IPv6 Addressing Architecture
  • RFC 3736 Stateless Dynamic Host Configuration Protocol (DHCP) Service for IPv6
  • RFC 3810 MLDv2 for IPv6
  • RFC 4214 Intra-Site Automatic Tunnel Addressing Protocol (ISATAP)
MIBs
  • RFC 1156 (TCP/IP MIB)
  • RFC 1157 A Simple Network Management Protocol (SNMP)
  • RFC 1213 MIB II
  • RFC 1215 A Convention for Defining Traps for use with the SNMP
  • RFC 1229 Interface MIB Extensions
  • RFC 1493 Bridge MIB
  • RFC 1573 SNMP MIB II
  • RFC 1643 Ethernet MIB
  • RFC 1657 BGP-4 MIB
  • RFC 1724 RIPv2 MIB
  • RFC 1757 Remote Network Monitoring MIB
  • RFC 1850 OSPFv2 MIB
  • RFC 1907 SNMPv2 MIB
  • RFC 2011 SNMPv2 MIB for IP
  • RFC 2012 SNMPv2 MIB for TCP
  • RFC 2013 SNMPv2 MIB for UDP
  • RFC 2096 IP Forwarding Table MIB
  • RFC 2233 Interface MIB
  • RFC 2452 IPV6-TCP-MIB
  • RFC 2454 IPV6-UDP-MIB
  • RFC 2465 IPv6 MIB
  • RFC 2466 ICMPv6 MIB
  • RFC 2571 SNMP Framework MIB
  • RFC 2572 SNMP-MPD MIB
  • RFC 2573 SNMP-Target MIB
  • RFC 2578 Structure of Management Information Version 2 (SMIv2)
  • RFC 2580 Conformance Statements for SMIv2
  • RFC 2618 RADIUS Client MIB
  • RFC 2620 RADIUS Accounting MIB
  • RFC 2665 Ethernet-Like-MIB
  • RFC 2668 802.3 MAU MIB
  • RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
  • RFC 2787 VRRP MIB
  • RFC 2819 RMON MIB
  • RFC 2925 Ping MIB
  • RFC 2932IP (Multicast Routing MIB)
  • RFC 2933 IGMP MIB
  • RFC 2934 Protocol Independent Multicast MIB for IPv4
  • RFC 3414 SNMP-User based-SM MIB
  • RFC 3415 SNMP-View based-ACM MIB
  • RFC 3417 Simple Network Management Protocol (SNMP) over IEEE 802 Networks
  • RFC 3418 MIB for SNMPv3
  • RFC 3595 Textual Conventions for IPv6 Flow Label
  • RFC 3826 AES for SNMP's USM MIB
  • RFC 4133 Entity MIB (Version 3)
  • RFC 4444 Management Information Base for Intermediate System to Intermediate System (IS-IS)
Network management
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  • RFC 1155 Structure of Management Information
  • RFC 1157 SNMPv1
  • RFC 1448 Protocol Operations for version 2 of the Simple Network Management Protocol (SNMPv2)
  • RFC 2211 Controlled-Load Network
  • RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
  • RFC 3176 sFlow
  • RFC 3411 SNMP Management Frameworks
  • RFC 3412 SNMPv3 Message Processing
  • RFC 3414 SNMPv3 User-based Security Model (USM)
  • RFC 3415 SNMPv3 View-based Access Control Model VACM)
  • ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
OSPF
  • RFC 1245 OSPF protocol analysis
  • RFC 1246 Experience with OSPF
  • RFC 1765 OSPF Database Overflow
  • RFC 1850 OSPFv2 Management Information Base (MIB), traps
  • RFC 2154 OSPF w/ Digital Signatures (Password, MD-5)
  • RFC 2328 OSPFv2
  • RFC 2370 OSPF Opaque LSA Option
  • RFC 3101 OSPF NSSA
  • RFC 3137 OSPF Stub Router Advertisement
  • RFC 3630 Traffic Engineering Extensions to OSPF Version 2
  • RFC 4061 Benchmarking Basic OSPF Single Router Control Plane Convergence
  • RFC 4062 OSPF Benchmarking Terminology and Concepts
  • RFC 4063 Considerations When Using Basic OSPF Convergence Benchmarks
  • RFC 4222 Prioritized Treatment of Specific OSPF Version 2 Packets and Congestion Avoidance
  • RFC 4811 OSPF Out-of-Band LSDB Resynchronization
  • RFC 4812 OSPF Restart Signaling
  • RFC 4813 OSPF Link-Local Signaling
  • RFC 4940 IANA Considerations for OSPF
QoS/CoS
  • IEEE 802.1P (CoS)
  • RFC 1349 Type of Service in the Internet Protocol Suite
  • RFC 2211 Specification of the Controlled-Load Network Element Service
  • RFC 2212 Guaranteed Quality of Service
  • RFC 2474 DSCP DiffServ
  • RFC 2475 DiffServ Architecture
  • RFC 2597 DiffServ Assured Forwarding (AF)
  • RFC 2598 DiffServ Expedited Forwarding (EF)
Security
  • IEEE 802.1X Port Based Network Access Control
  • RFC 1321 The MD5 Message-Digest Algorithm
  • RFC 1334 PPP Authentication Protocols (PAP)
  • RFC 1492 An Access Control Protocol, Sometimes Called TACACS
  • RFC 1994 PPP Challenge Handshake Authentication Protocol (CHAP)
  • RFC 2082 RIP-2 MD5 Authentication
  • RFC 2104 Keyed-Hashing for Message Authentication
  • RFC 2408 Internet Security Association and Key Management Protocol (ISAKMP)
  • RFC 2409 The Internet Key Exchange (IKE)
  • RFC 2716 PPP EAP TLS Authentication Protocol
  • RFC 2865 RADIUS Authentication
  • RFC 2866 RADIUS Accounting
  • RFC 2867 RADIUS Accounting Modifications for Tunnel Protocol Support
  • RFC 2868 RADIUS Attributes for Tunnel Protocol Support
  • RFC 2869 RADIUS Extensions
  • Access Control Lists (ACLs)
  • Guest VLAN for 802.1x
  • MAC Authentication
  • Port Security
  • SSHv1/SSHv2 Secure Shell
» Back to top

HP X125 1G SFP LC LH40 1310nm Transceiver (JD061A)

A small form-factor pluggable SFP Gigabit LH40 transceiver that provides a full duplex Gigabit solution up to 40km on a single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type: LC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%, noncondensing
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • Up to 40km

Fiber type: Single Mode

Compatible products

HP X120 1G SFP LC LH40 1550nm Transceiver (JD062A)

A small form-factor pluggable (SFP) Gigabit LH40 transceiver that provides a full-duplex Gigabit solution up to 40 km on a single mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 85%
Altitude: up to 10,000 ft.

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • Up to 40km

Fiber type: Single Mode

Compatible products

HP X125 1G SFP LC LH70 Transceiver (JD063B)

A small form-factor pluggable (SFP) Gigabit LH70 transceiver that provides a full-duplex Gigabit solution up to 70km on a single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type: LC
Wavelength: 1550 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 85%
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • Single-mode fiber optic, complying with ITU-T G.652

Maximum distance:

  • 70km

Fiber type: Single Mode

Compatible products

HP X120 1G SFP LC SX Transceiver (JD118B)

A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m on a Multimode fiber.

Ports

1 LC 1000BASE-SX port

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Maximum distance:
  • FDDI Grade distance = 220m
  • OM1 = 275m
  • OM2 = 500m
  • OM3 = Not Specified by standard

Cable length: up to 550m
Fiber type: Multi Mode

Compatible products

HP X120 1G SFP LC LX Transceiver (JD119B)

A small form-factor pluggable (SFP) Gigabig LX transceiver that provides a full duplex Gigabit solution up to 550m on MMF or 10Km on SMF

Ports

1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)

Connectivity

Connector type: LC
Wavelength: 1300 nm

Physical characteristics

Dimensions: 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)
Full configuration weight: 0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • Either single mode or multimode

Maximum distance:

  • 550m for Multimode
  • 10km for Singlemode

Fiber type: Both

Compatible products

HP X120 1G SFP RJ45 T Transceiver (JD089B)

A small form factor pluggable (SFP) Gigabit 1000Base-T transceiver that provides a full duplex Gigabit solution up to 100m on a Cat-5+ cable.

Ports

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)

Connectivity

Connector type: RJ-45

Physical characteristics

Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Full configuration weight: 0.07 lb. (0.03 kg)

Electrical characteristics

Power consumption typical: 0.8 W
Power consumption maximum: 1.0 W

Cabling

Cable type:
  • 1000BASE-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T

Maximum distance:

  • 100m

Compatible products

HP X170 1G SFP LC LH70 1550 Transceiver (JD109A)

JD109A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X170 1G SFP LC LH70 1570 Transceiver (JD110A)

JD110A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X170 1G SFP LC LH70 1590 Transceiver (JD111A)

JD111A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X170 1G SFP LC LH70 1610 Transceiver (JD112A)

JD112A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X170 1G SFP LC LH70 1470 Transceiver (JD113A)

JD113A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X170 1G SFP LC LH70 1490 Transceiver (JD114A)

JD114A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X170 1G SFP LC LH70 1510 Transceiver (JD115A)

JD115A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X170 1G SFP LC LH70 1530 Transceiver (JD116A)

JD116A


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X130 10G SFP+ LC ER 40km Transceiver (JG234A)

HP X130 10G SFP+ LC ER 40km Transceiver


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable (JD095C)

HP X240 SFP+ SFP+ 0.65 m Direct Attach Cable


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable (JD096C)

HP X240 SFP+ SFP+ 1.2 m Direct Attach Cable


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable (JG081C)

HP X240 SFP+ SFP+ 5 m Direct Attach Copper Cable


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 58x0AF 650W AC Power Supply (JC680A)

HP 58x0AF 650W AC Power Supply


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 58x0AF 650W DC Power Supply (JC681A)

HP 58x0AF 650W DC Power Supply


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 5500/5120 2-port 10GbE SFP+ Module (JD368B)

HP 5500/A5120 2-port 10GbE SFP+ Module: 2-port SFP+ module for HP 5500 HI, 5500 EI, 5500 SI, 5120 EI, and 5120 HI switches.

Ports

2 SFP+ 10-GbE ports

Compatible products

HP 5830AF-48G Back (power side) to Front (port side) Airflow Fan Tray (JC692A)

HP 5830AF-48G back (power side) to front (port side) airflow Fan Tray

Physical characteristics

Dimensions: 8.27(d) x 12.8(w) x 4.17(h) in. (21.01 x 32.51 x 10.59 cm)
Weight: 1.98 lb. (0.9 kg)

Compatible products

HP 5830AF-48G Front (port side) to Back (power side) Airflow Fan Tray (JC693A)

HP 5830AF-48G front (port side) to back (power side) airflow Fan Tray

Physical characteristics

Dimensions: 8.27(d) x 12.8(w) x 4.17(h) in. (21.01 x 32.51 x 10.59 cm)
Weight: 1.98 lb. (0.9 kg)

Compatible products

HP 5830AF-96G back (power side) to front (port side) airflow Fan Tray (JC695A)

HP 5830AF-96G back (power side) to front (port side) airflow Fan Tray


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 5830AF-96G front (port side) to back (power side) airflow Fan Tray (JC696A)

HP 5830AF-96G front (port side) to back (power side) airflow Fan Tray


This accessory currently doesn't have any detailed specifications. To learn more contact a HP Networking Expert.

Compatible products

HP 5830 Switch Series

Transceivers

Power Supply

Additional accessories

HP 5830AF-48G Switch with 1 Interface Slot (JC691A) accessories HP 5830AF-96G Switch (JC694A) accessories
» Back to top

HP 5830 Switch Series

HP Care Packs for HP Networking

There are currently no care packs

» Back to top

HP Networking Services

Services that add value to your business

The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

» Back to top

Additional Support and Services

To get more details about the HP Services available in your country, please visit Networking Services

Please check the availability of these service in your respective countries.

» Back to top

Resources

[+] Show Selections

Language

  •  English
  •  French
  •  German
  •  Italian
  •  Russian
  •  Spanish (ES)
  •  Spanish (LAT)
  •  Japanese
  •  Korean
  •  Portuguese (BR)

Content Type

  •  Brochures
  •  Case Studies
  •  Datasheets
  •  Fact Sheets
  •  Newsletters
  •  QuickSpecs
  •  Reference Guides
  •  Related Links
  •  Reports
  •  Software

 

  •  Solution Briefs
  •  TrendWatches
  •  Videos
  •  White Papers

Content Type

  •  Application Notes
  •  Configuration Guides
  •  Design Guides
  •  Feature Matrixes
  •  Installation Guides
  •  Manuals
  •  PoC Test Plans
  •  Reference Architectures
  •  Related Links
  •  Solution Briefs

 

  •  Technical Guides
  •  Videos
  •  White Papers

Products, Solutions and Industries

  •  AllianceONE
  •  Accessories & Modules
  •  Application Delivery
  •  Cloud Networks
  •  Education
  •  FlexBranch
  •  FlexCampus
  •  FlexFabric - Data Center
  •  FlexManagement
  •  FlexNetwork

 

  •  Government
  •  Green
  •  Healthcare
  •  Hospitality
  •  Manufacturing
  •  Oil and Gas
  •  Regional Banking
  •  Retail
  •  Rich Media
  •  Routers

 

  •  Security
  •  Switches
  •  Technology
  •  Transportation
  •  Unified Communications
  •  Virtualization
  •  Wireless and Mobility

Generic Header

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
No content available
Brochures (0) File Type Size Date
Case Studies (0) File Type Size Date
Datasheets (0) File Type Size Date
Fact Sheets (0) File Type Size Date
Newsletters (0) File Type Size Date
QuickSpecs (0) File Type Size Date
Reference Guides (0) File Type Size Date
Related Links (0) File Type Size Date
Reports (0) File Type Size Date
Software (0) File Type Size Date
Solution Briefs (0) File Type Size Date
TrendWatches (0) File Type Size Date
Videos (0) File Type Size Date
White Papers (0) File Type Size Date
Application Notes (0) File Type Size Date
Configuration Guides (0) File Type Size Date
Design Guides (0) File Type Size Date
Feature Matrixes (0) File Type Size Date
Installation Guides (0) File Type Size Date
Manuals (0) File Type Size Date
PoC Test Plans (0) File Type Size Date
Reference Architectures (0) File Type Size Date
Related Links (0) File Type Size Date
Solution Briefs (0) File Type Size Date
Technical Guides (0) File Type Size Date
Videos (0) File Type Size Date
White Papers (0) File Type Size Date

HP networking products

 

HP networking solutions

End of sale updates & legacy products

HP networking resources

HP services